Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 39-01-4047 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 2200VAC dielectric voltage. It operates b/w -40 to 105 °C, suitable for commercial applications requiring durable crimp termination in cable mounting setups.
Median Price
$0.423
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.304
100+ parts
-
1k+ parts
$0.267
10k+ parts
$0.241
Adafruit Industries
$0.305
$0.290
Heilind Electronics
$0.354
$0.298
$0.285
Farnell
$0.405
$0.268
$0.192
Arrow
Mouser Electronics
$0.610
$0.413
$0.319
RS (Exports)
$0.620
$0.529
$0.448
RS Americas
$0.646
$0.491
$0.394
DigiKey
$0.650
$0.426
$0.335
Distrelec
$0.984
$0.497
$0.422
TTI
Chip1Stop
$0.253
Powell Electronics
$0.332
$0.287
PEI Genesis
Newark
$0.427
$0.353
Verical
$0.524
Master Electronics
$0.342
$0.301
NEP Electronics
$0.255
Element14
$0.518
$0.411
Digiode
Maritex
$0.314
$0.167
$0.147
Nova Conductors
$0.328
TestEquity
$0.330
FDH Electronics
$0.345
$0.321
TME
$0.460
$0.383
NAC Semi
$0.343
IBS Electronics
$0.370
$0.320
Vyrian
VNN
EMSNET
Prism Electronics
Semicontronic
$0.177
$0.173
$0.172
Corphita
$0.274
Advanced Electronics
Argo Parts USA
$0.326
$0.316
Netroflash
Continental Prestige Electronics
$0.597
$0.346
$0.271
Allen Electronics Distributors
$0.700
$0.540
Aztec Data Supply Inc.
$0.989
Andel Nordic
$7.793
$7.481
EMSNET (Excess)
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Eastek
Robosynatics
Lucentia Tech
The 4-inch body length provides ample space for connecting cables and ensures a secure fit.
High insulation resistance helps prevent electrical leakage and ensures safe operation.
Withstanding voltage of 2200VAC ensures the connector can handle high levels of electrical stress.
Polyamide66 is a durable and heat-resistant material, making the connector suitable for various operating environments.
With a maximum operating temperature of 105°C, the connector can withstand high temperatures without compromising performance.
The connector can operate in low-temperature environments as low as -40°C, making it versatile for different applications.
Low contact resistance ensures efficient power transfer and minimal energy loss.
With a durability of 30 cycles, the connector can be repeatedly connected and disconnected without degradation in performance.
The cable mounting type allows for easy installation and secure connection to cables.
Crimp termination type provides a reliable and robust connection between the connector and cables.
Power Connectors 39-01-4047 attributes and parameters. Explore more Power Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
39-01-4047 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EU2B-YS3103F
Idec
ROTARY SWITCH;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Electronic Devices
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Secos
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
43045-0806
Molex
The Molex 43045-0806 is a rectangular power connector with 8 contacts, LCP insulator, and tin finish. It operates b/w -40 to 105°C, suitable for commercial applications. With a male contact gender and right-angle mounting style, it offers high insulation resistance of 1Gohm.
1720430802
RECTANGULAR POWER CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN; Mating Contact Finish: NOT SPECIFIED; Contact Material: COPPER ALLOY;
105313-2108
105313-2108 by Molex is a rectangular power connector with 8 contacts, TIN over nickel finish. Made of liquid crystal polymer, it has male gender contacts for solder termination. UL 94V-0 rated, it's used in board mounting applications for power connectivity.
51116-1601
Molex 51116-1601 is a rectangular power connector with 16 contacts, 0.157" pitch, and PBTP shell material. It has a body length of 2.736", insulation resistance of 100M ohm, and operates b/w -40°C to 85°C. Ideal for commercial applications requiring crimp termination in cable mounting setups.
PCIH47M400A1/AA
Positronic Industries
PCIH47M400A1/AA by Positronic: Rectangular power connector with 47 contacts, gold over nickel termination finish. Ideal for board and panel mounting in applications requiring mixed contacts and male gender connectors.
1648117-1
TE Connectivity
TE Connectivity's 1648117-1 is a rectangular power connector with mixed contacts, rated for 250V and 35A signal current. Made of PBT, it operates b/w -40 to 105°C. Ideal for panel mounting applications requiring a UL-rated, flame-retardant female receptacle with 22 contacts in S16P6 arrangement.
IPS1-125-01-S-D
Samtec
The Samtec IPS1-125-01-S-D is a rectangular power connector with 50 contacts. It features phosphor bronze contact material with gold finish and liquid crystal polymer insulator. Ideal for board mounting applications requiring solder termination, especially in power systems.
1330
Anderson Power Products
1330 by Anderson Power Products is a rectangular power connector with UL 94V-0 flammability code. It has 1 contact and supports crimp and solder termination. This hermaphroditic connector is commonly used in cable applications.
M80-5000000M1-04-331-00-000
Harwin Plc
M80-5000000M1-04-331-00-000 by Harwin PLC is a rectangular power connector with 4 contacts, gold termination finish, and glass-filled polyphenylene sulfide insulator. It has a body length of 1.024", width of 0.238", and depth of 0.22". Ideal for commercial applications with an operating temperature range from -55°C to 150°C.
15-06-0141
Molex 15-06-0141 is a RECTANGULAR POWER CONNECTOR with 14 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It has a body size of 2.409" x 0.681" x 0.772", operating from -40 to 105°C. Ideal for commercial applications requiring reliable power connections with solder termination on panels.
39-30-1042
Molex 39-30-1042 is a rectangular power connector with 4 contacts, rated at 8A signal current. It features a mating contact pitch of 0.165", insulation resistance of 1Gohm, and dielectric voltage withstand of 1500VAC. Ideal for board mounting applications in commercial settings due to its durability and reliability standards.
1-640508-0
TE Connectivity 1-640508-0 is a RECTANGULAR POWER CONNECTOR with 3 contacts, rated at 250V and 9A. Made of POLYAMIDE66, it has a temperature range of -55 to 85 °C. Ideal for power applications requiring secure crimp termination in a compact panel-mount design.
03-06-1038
Molex 03-06-1038 is a rectangular power connector with 0.145" mating contact pitch, 1500VAC dielectric voltage, and -40 to 105°C operating temperature range. Ideal for commercial applications requiring a polarized housing, it has 3 contacts, crimp termination, and supports wire sizes from 30 to 18 AWG.
43045-0213
The Molex 43045-0213 is a rectangular power connector with 2 rows, rated for 5A signal current. Featuring LCP insulator material, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for board mounting applications requiring durability and reliability.
26-01-3115
Molex 26-01-3115 is a RECTANGULAR POWER CONNECTOR with Matte Tin (Sn) finish. Made of POLYAMIDE66 insulator and BRASS contacts, it has 4 male contacts for board mounting via solder termination. UL94V-2 rated, ideal for power applications requiring reliable connections in electronic devices.
172310-1202
Molex 172310-1202 is a rectangular power connector with TIN over Nickel finish. Made of Liquid Crystal Polymer, it has 2 contacts and UL94V-0 flammability rating. Ideal for board mounting applications requiring male solder termination.
1720640004
Molex 1720640004 is a RECTANGULAR POWER CONNECTOR with 4 contacts, COPPER ALLOY material, and MATTE TIN OVER NICKEL finish. It is used for board mounting applications requiring male contact gender and solder termination. The connector meets UL Flammability Code 94V-0 standards.
39-29-1028
Molex 39-29-1028 is a rectangular power connector with 2 contacts, made of brass and tin finish. It has an insulation resistance of 1Gohm, dielectric voltage of 2200VAC, and operates b/w -40 to 105°C. Ideal for board mounting applications in commercial settings due to its durability and reliability certifications from CSA, TUV, UL.
43650-0215
The Molex 43650-0215 Power Connector features a body length of 0.38", insulation resistance of 1000000000 ohm, and termination contact finish with Bright Tin (Sn) - Nickel (Ni) barrier. It is used in board mounting applications, has a max operating temperature of 105°C, and rated current of 8.5A for signal transmission.
1-1604256-1
TE Connectivity 1-1604256-1 is a RECTANGULAR POWER CONNECTOR with POLYAMIDE insulator, UL 94V-0 rated. It has 4 contacts, suitable for 115/230VAC mains connection. Ideal for panel mounting applications in various industries due to its high temperature range (-40 to +105 °C) and CRIMP termination type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
39-01-2065
Molex 39-01-2065 is a rectangular power connector with 6 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It has a 0.543" body length, 0.46" width, and 0.77" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2040
Molex 39-01-2040 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and UL94V-2 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable and panel mounting configurations.
39-01-2025
The Molex 39-01-2025 is a rectangular power connector with insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. It is used in commercial applications, featuring a body length of 0.213", operating temperature range from -40 to 105 °C, and termination type as crimp.
39-01-2020
The Molex 39-01-2020 is a rectangular power connector with 0.213" body length, 0.42" width, and 0.77" depth. Featuring POLYAMIDE66 insulator material, it has an insulation resistance of 1Gohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector operates b/w -40°C to 105°C and offers reliable performance in cable termination setups.
39-01-2045
Molex 39-01-2045 is a rectangular power connector with 4 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105°C, suitable for commercial applications requiring high insulation resistance and UL certification. Ideal for cable and panel mounting with crimp termination, offering reliable performance in various electrical setups.
39-01-2060
Molex 39-01-2060 Power Connector features 6 contacts, with 0.543" body length and 0.46" width. Insulation resistance of 1Gohm, dielectric voltage of 1500VAC, and operating temp range from -40 to +105°C. Ideal for commercial applications requiring reliable power connections in various industries.
39-01-2085
The Molex 39-01-2085 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-4030
Molex 39-01-4030 is a rectangular power connector with 3 contacts, POLYAMIDE insulator, and 1500VAC dielectric voltage. It has a 0.54" body length, 0.29" width, and 0.81" depth. Ideal for commercial applications requiring reliable crimp termination in temperatures ranging from -40 to 105°C.
39-01-2080
The Molex 39-01-2080 is a rectangular power connector with 8 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It operates b/w -40 to 105 °C and has a contact resistance of 10 mohm. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
39-01-2041
Molex 39-01-2041 is a rectangular power connector with 4 contacts, made of brass. It has a mating contact pitch of 0.165", insulation resistance of 1G ohm, and operates b/w -40 to 105°C. Ideal for cable and panel mounting applications requiring durability up to 30 cycles.
39-01-2021
The Molex 39-01-2021 is a rectangular power connector with 0.425" body length, 0.46" width, and 0.94" depth. It has an insulation resistance of 1000000000 ohm and dielectric voltage of 1500VAC. Ideal for commercial applications, this connector features a POLYAMIDE insulator and operates b/w -40 to 105°C temperatures.
39-01-3028
Molex 39-01-3028 is a rectangular power connector with POLYAMIDE66 insulator. It has 2 contacts, female gender, and crimp termination. With UL94V-0 flammability rating, it's ideal for commercial applications requiring reliable cable mounting with straight style and locking option.
39-01-2161
Molex 39-01-2161 is a rectangular power connector with 16 contacts, POLYAMIDE insulator, and 0.165" contact pitch. It operates b/w -40 to 105°C, suitable for commercial applications requiring durable crimp termination in panel mounting setups. With UL certification and polarization key, it offers reliable connectivity for power systems.
39-01-2061
RECTANGULAR POWER CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; DIN Conformance: NO;
39-01-4031
Molex 39-01-4031 is a rectangular power connector with 3 contacts, made of POLYAMIDE insulator material. It has a dielectric voltage rating of 1500VAC and operates b/w -40 to 105°C. Ideal for commercial applications requiring high insulation resistance and UL94V-0 flammability compliance.
39-01-3023
Molex 39-01-3023 is a rectangular power connector with 2 rows, insulation resistance of 1Gohm, and operating temp range from -40 to 105°C. Ideal for cable and panel mounting applications due to its durability of 30 cycles, crimp termination type, and male contact gender.
39-01-2100
Molex 39-01-2100 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and 1500VAC dielectric voltage. It is used in commercial applications for crimp termination on cables and panels, offering high insulation resistance of 1Gohm and operating temperature range from -40 to 105°C.
39-01-2125
Molex 39-01-2125 is a rectangular power connector with 12 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable power connections in cable and panel setups.
39-01-2120
Molex 39-01-2120 is a rectangular power connector with 12 contacts, TIN finish, and polyamide66 insulator. It operates b/w -40 to 105°C, withstands up to 1500VAC, and has an insulation resistance of 1Gohm. Ideal for commercial applications requiring reliable female crimp connectors in cable and panel mounting setups.
39-01-2105
The Molex 39-01-2105 is a rectangular power connector with 10 contacts, POLYAMIDE66 insulator, and UL94V-0 flammability rating. It operates b/w -40 to 105°C, has a dielectric strength of 1500VAC, and features crimp termination for female contacts. Ideal for commercial applications requiring reliable power connections in tight spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved