Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL;
Median Price
$2.120
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
-
1k+ parts
$2.000
10k+ parts
$1.600
Interstate Connecting
$2.258
$1.980
$1.839
Mouser Electronics
$3.330
$2.410
$2.130
$1.830
DigiKey
$1.960
$1.850
$1.820
Chip1Stop
$1.590
$1.560
Newark
$2.470
$2.220
Master Electronics
$1.990
$1.900
$1.460
Powell Electronics
$1.890
$1.720
Farnell
$1.640
$1.610
TTI Europe
Digiode
$1.748
Nova Conductors
$1.800
TestEquity
$2.110
IBS Electronics
$1.896
$1.812
$1.644
TME
$1.620
$1.410
$1.190
Vyrian
Sensible Micro Corp
ComSIT Distribution GmbH
VNN
NAC Semi
$2.620
Corphita
$1.656
Netroflash
$1.710
$1.674
Andel Nordic
$6.777
$6.506
Perfect Parts
Abacus Technologies
Glotronic Ltd.
EMSNET (Excess)
Eastek
Combination Line Connectors 34691-0203 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
Reliability:
Sub-Category:
34691-0203 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Tooling Improvement 02/Sep/2014
PCN Assembly/Origin - Multiple Devices Tooling 24/Aug/2016
PCN Packaging - Mult Devs Cancel Packaging Change 28/Dec/2023 Mult Devs Packaging 14/Sep/2023
PCN Other - 34690,34691,34936 Series Inspection 09/Jan/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Rca Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1554216002
Molex
WIRE AND CABLE;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Leshan Radio
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
AT06-4S-SR02BLK
Amphenol
The Amphenol AT06-4S-SR02BLK is a 2-row combination line connector with 4 contacts, rated for 13A signal current. It has a compact body size of 0.906" x 0.815" x 1.728", suitable for cable mounting applications. Operating temperature range is -55°C to 125°C, making it ideal for various industrial and automotive uses.
34691-0200
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
DTM04-6P-E005
TE Connectivity
TE Connectivity's DTM04-6P-E005 is a 1.77"x.756"x.937" combination line connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 flammability rating, and 250V voltage. It has 6 contacts, rated at 7.5A for signal current, operating from -55 to 125°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
1-967642-1
TE Connectivity 1-967642-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 3 contacts, rated at 7.5A for signal current, and operates b/w -40 to 120°C. Ideal for cable mounting applications due to its compact dimensions of 0.787" x 0.953" x 0.602".
AT06-08SA-EC01
The Amphenol AT06-08SA-EC01 is a 2-row combination line connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and total of 4 contacts. Ideal for cable mounting applications requiring female contact gender and plug body style.
DT13-12PA-R015
TE Connectivity's DT13-12PA-R015 is a combination line connector with a body length of 2.298" and width of 5.62". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, with its right angle mounting style and solder termination type, is commonly used in board applications requiring a polarized, male contact connector with 48 contacts.
2324808-1
TE Connectivity 2324808-1 is a Combination Line Connector with dimensions of 1.306" x 0.649" x 0.621". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125 °C. Ideal for applications requiring a polarized connector with UL Flammability Code of 94V-0.
776087-1
TE Connectivity's 776087-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, suitable for board mounting with Tin Termination Finish. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 105°C, ideal for commercial applications requiring 8A signal current.
4-2103015-1
TE Connectivity's 4-2103015-1 is a Combination Line Connector with dimensions of 1.295" x 2.177" x 1.087". Rated for 850V, it operates b/w -40°C to 125°C, featuring GLASS FILLED POLYAMIDE insulator material. Ideal for applications requiring FEMALE contact gender and W/STRAIN RELIEF mounting option.
33472-1201
The Molex 33472-1201 is a Combination Line Connector with 12 contacts, rated at 22A. It features a mating contact pitch of 0.138", GLASS FILLED NYLON insulator material, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections in polarized housings with crimp terminations.
2319023-2
TE Connectivity's 2319023-2 is a Combination Line Connector with -40 to 125 °C operating temperature range. Featuring UL 94V-0 flammability rating, it has 8 contacts and supports up to 30A signal current. Ideal for applications requiring high-current connections in harsh environments.
12110192
Aptiv
Aptiv's 12110192 is a Combination Line Connector with 0.968" Body Depth, GLASS FILLED POLYESTER Insulator. It features 2 Rows Loaded, 3 Contacts, FEMALE Gender, RND PIN-SKT Style. Ideal for automotive and industrial applications requiring reliable electrical connections.
DT04-12PB
TE Connectivity's DT04-12PB is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a total of 12 contacts and operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, crimped male connector with strain relief.
15397577
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Empty Shell: NO; Mounting Type: CABLE;
DT04-3P
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
AT06-4S-SR01BLK
The Amphenol AT06-4S-SR01BLK is a combination line connector with 4 contacts, rated for 13A signal current. With a temperature range of -55 to 125°C, it features female contact gender and round pin/socket style. Ideal for cable mounting applications requiring reliable connectivity in compact spaces.
AT06-3S-RD01
The Amphenol AT06-3S-RD01 is a combination line connector with 3 contacts, rated for 13A signal current. It features a polyethylene insulator and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications, this connector has a compact body measuring 0.91" x 0.724" x 1.14".
DTM04-2P-E005
TE Connectivity's DTM04-2P-E005 is a 1.68" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features UL 94V-0 flammability, polarized key, and male contact gender suitable for cable mounting applications requiring a rated current of 7.5A.
776534-1
TE Connectivity's 776534-1 is a Combination Line Connector with dimensions of 0.772" x 1.872" x 0.745". It has a rated voltage of 250V, UL Flammability Code of 94-HB, and can handle up to 13A current. This connector is ideal for applications requiring male contacts, polarized keying, and operating temperatures from -40°C to 125°C.
54201412
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body Width: .882 inch; Total No. of Contacts: 14;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34691-0202
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34690-0201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: YES; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; No. of Rows Loaded: 2;
34691-0160
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED;
34691-0080
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
34690-0160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Contact Style: HYBRID; Mounting Type: BOARD;
34690-0200
Molex 34690-0200 is a Combination Line Connector with 20 contacts, rated at 10A. It features high temp thermoplastic insulator material and matte tin over nickel termination finish. Ideal for board mounting applications in commercial settings, offering durability of 10 cycles and operating temperatures from -40 to 100°C.
34691-0120
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; JESD-609 Code: e3;
34691-0201
34691-0162
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier;
34690-0162
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Maximum Operating Temperature (Cel): 100; Empty Shell: NO;
34691-0122
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS;
34690-0161
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e3;
34690-0120
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Body Length: .94 inch; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34691-0121
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: BRASS; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34690-0080
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VDC; No. of Connectors: ONE;
34691-9162
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
34691-0161
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS;
34691-0081
34691-0082
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54; Contact Pattern: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved