Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
Median Price
$1.200
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.440
100+ parts
$1.070
1k+ parts
$1.020
10k+ parts
$0.897
Arrow
$1.724
-
DigiKey
$1.770
Element14
$1.840
TTI
$0.870
Verical
$1.118
$1.043
Farnell
$1.030
TTI Europe
$0.852
Chip1Stop
$0.200
Newark
Digiode
$0.864
TestEquity
$1.010
Nova Conductors
$1.040
TME
$1.520
$0.840
$0.730
Vyrian
VNN
IBS Electronics
$0.950
$0.912
$0.787
Elcom Components
Prism Electronics
Semicontronic
$0.170
$0.166
$0.165
Corphita
$0.819
Continental Prestige Electronics
$0.646
$0.619
Netroflash
$1.019
Aztec Data Supply Inc.
$3.755
Andel Nordic
$5.180
$4.972
Component Connect
Perfect Parts
Authorized Procurement Solutions
Assy Fe
Argo Parts USA
EMSNET (Excess)
Combination Line Connectors 34691-0080 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
JESD-609 Code:
Reliability:
Sub-Category:
34691-0080 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Tooling Improvement 02/Sep/2014
PCN Assembly/Origin - Multiple Devices Additional Supplier 25/Aug/2020
PCN Other - 34690,34691,34936 Series Inspection 09/Jan/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Formosa Microsemi
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
World Products
Rfe International
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
Grande Electronics
AT06-12SA-SR2GY
Amphenol
The Amphenol AT06-12SA-SR2GY is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating from -55°C to 125°C. Ideal for cable mounting applications requiring female contacts and SQ PIN-SKT style connectors.
54201411
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; MIL Conformity: NO; Total No. of Contacts: 14;
DT04-12PC-BE02
TE Connectivity
TE Connectivity's DT04-12PC-BE02 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
ATP06-2S
The Amphenol ATP06-2S is a combination line connector with Polyethylene insulator, rated for 25A signal current. It operates b/w -55°C to 125°C, featuring a plug shell style and crimp termination. Ideal for cable mounting applications requiring a female contact gender with two contacts.
AT04-4P-KIT01
The Amphenol AT04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 13A signal current. It features a body size of 0.827" x 0.772" x 1.811", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
776536-1
TE Connectivity 776536-1 is a Combination Line Connector with dimensions of 0.969"x1.872"x.884". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125 °C. Suitable for applications requiring a polarized connector with 13A signal current rating and UL certification.
AT04-4P-PM11
The Amphenol AT04-4P-PM11 is a 2-row combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 2.19" x 1.46" x 0.69", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring a male receptacle with round pin contact style.
1-180916-0
Tyco Electronics Amp
The Tyco Electronics Amp 1-180916-0 is a Combination Line Connector with Polycarbonate insulator material, UL Flammability Code 94V-0. It features a male contact gender and cable mounting type, suitable for various applications requiring reliable electrical connections in industrial settings.
DTM06-2S-EE03
TE Connectivity's DTM06-2S-EE03 is a 1.47" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring polarized housing, UL 94V-0 flammability code, and crimp termination, it's ideal for cable mounting applications requiring a 7.5A signal current.
350778-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; IEC Conformity: NO; Empty Shell: YES;
AT06-2S-OMGRY
The Amphenol AT06-2S-OMGRY is a Combination Line Connector with 2 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this connector has a compact body size of 0.728" x 0.713" x 1.72", making it suitable for various electronic devices.
33481-0401
Molex
Molex 33481-0401 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED NYLON Insulator, and -40 to 125 °C Operating Temperature. It has 4 contacts for 22A signal current, suitable for commercial applications in cable mounting setups.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
AT06-12SA-MM01
The Amphenol AT06-12SA-MM01 is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating temperature range from -55 to 125°C, and dimensions of 1.791" x 0.815" x 1.303". Ideal for cable mounting applications requiring female contact gender and round pin/socket style connections.
DT06-4S-C015
TE Connectivity's DT06-4S-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
12162000
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; No. of Rows Loaded: 1; Mating Info.: 12052641;
154719
TE Connectivity 154719 is a Combination Line Connector with 0.96" body length, GLASS FILLED POLYAMIDE66 insulator, and -40 to 105 °C operating temperature range. It features UL 94V-2 flammability code, polarized key, and UL reference standard. Ideal for cable mounting applications at 115/230VAC mains connector rating.
DTM06-12SB-E003
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
12065685
Aptiv
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Total No. of Contacts: 5; MIL Conformity: NO;
AT06-3S-RD01
The Amphenol AT06-3S-RD01 is a combination line connector with 3 contacts, rated for 13A signal current. It features a polyethylene insulator and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications, this connector has a compact body measuring 0.91" x 0.724" x 1.14".
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34691-0200
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
34690-0201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: YES; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; No. of Rows Loaded: 2;
34691-0160
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED;
34691-0202
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34691-0120
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; JESD-609 Code: e3;
34690-0080
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VDC; No. of Connectors: ONE;
34690-0160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Contact Style: HYBRID; Mounting Type: BOARD;
34690-0200
Molex 34690-0200 is a Combination Line Connector with 20 contacts, rated at 10A. It features high temp thermoplastic insulator material and matte tin over nickel termination finish. Ideal for board mounting applications in commercial settings, offering durability of 10 cycles and operating temperatures from -40 to 100°C.
34691-0201
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL;
34690-0161
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e3;
34691-9081
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
34691-9160
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
34691-0203
34691-9162
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
34691-0121
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: BRASS; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34691-0122
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS;
34691-0161
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED; Contact Material: BRASS;
34691-0162
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier;
34691-0081
34691-0082
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; PCB Contact Row Spacing (mm): 2.54; Contact Pattern: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved