Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol AT04-3P-KIT01 is a Combination Line Connector with dimensions of 0.96" x 0.827" x 1.7". It has a max operating temperature of 125°C and min of -55°C, suitable for applications requiring a rated current of 13A. This male connector features 3 contacts, copper alloy material, and is ideal for cable mounting in various electronic systems.
Median Price
$3.735
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Arrow
1+ parts
$0.597
100+ parts
$0.592
1k+ parts
-
10k+ parts
Chip1Stop
$3.780
Newark
$4.190
$3.080
$2.840
Mouser Electronics
$4.350
$3.010
$2.690
$2.520
DigiKey
$4.400
$3.226
$2.700
$2.529
RS (Exports)
$4.490
$3.660
$3.460
Element14
$5.023
Farnell
$6.684
$5.477
$3.893
TTI
$2.770
$2.660
Future Electronics
$2.760
Master Electronics
$2.740
$2.570
$2.390
Powell Electronics
$3.690
$3.510
Verical
$3.224
TTI Europe
$2.632
$2.533
Nova Conductors
$2.910
Electro Sonic
$5.380
$4.740
$3.030
VNN
Vyrian
IBS Electronics
$3.871
$3.731
NAC Semi
$4.210
Semicontronic
$2.240
$2.184
$2.173
Gateway Technologies
$2.628
$2.338
Aranea Global
$2.852
$2.738
Singapore Electronics
$2.890
$2.687
$2.572
$2.456
Argo Parts USA
Continental Prestige Electronics
$4.450
$3.350
$2.590
Aztec Data Supply Inc.
$7.990
Corohmni
$9.805
AZTECH Wire
$19.672
Authorized Procurement Solutions
Eastek
GreenTree Electronics
Abacus Technologies
Glotronic Ltd.
Compact size allows for easy installation in tight spaces.
Slim profile enables close connections without taking up excess space.
Sufficient depth to accommodate multiple connections within the connector.
Polyethylene provides excellent insulation properties, ensuring reliable performance in various environments.
High maximum operating temperature allows for use in demanding conditions without overheating.
Wide temperature range ensures functionality in extreme cold conditions.
Allows for customization and adding components as needed for specific applications.
Specifically designed for combining multiple lines within a single connector, reducing the need for separate connections.
Copper alloy contacts provide excellent conductivity and durability for long-lasting performance.
A high rated current ensures efficient signal transmission without risk of overload.
Provides multiple connection points for versatile applications.
Simple cable mounting allows for easy integration into existing systems.
Compatible with female connectors for seamless connections.
Receptacle style facilitates secure connections with other components.
Round pin sockets ensure stable connections with minimal risk of disconnection.
Combination Line Connectors AT04-3P-KIT01 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Total No. of Contacts:
AT04-3P-KIT01 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Leshan Radio
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2-2834074-2
TE Connectivity
TE Connectivity's 2-2834074-2 is a Combination Line Connector with dimensions of 0.382" x 0.321" x 0.638". It has an operating temperature range of -40 to 105°C, UL flammability rating of 94V-0, and can handle up to 5A signal current. Ideal for cable mounting applications requiring a female crimp terminal plug.
DTM06-2S-E004
TE Connectivity's DTM06-2S-E004 is a 1.085" x 0.475" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features polarized housing, UL 94V-0 flammability code, and crimp termination. Ideal for applications requiring a 7.5A signal current in cable mounting setups.
12162197
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: SHROUDED; MIL Conformity: NO; Total No. of Contacts: 2;
DRC12-40PAE
TE Connectivity's DRC12-40PAE is a 40-contact combination line connector with nickel termination, GLASS FILLED POLYPHENYLENE SULFIDE insulator, and UL 94V-0 flammability rating. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a polarized male receptacle with strain relief option.
1-776280-1
TE Connectivity 1-776280-1 is a Combination Line Connector with dimensions 1.606" x 1.498" x 1.263". It has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, rated at 17A for signal current, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a polarized, right angle male connector with UL94V-0 flammability rating.
1-1456426-5
TE Connectivity 1-1456426-5 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, operates b/w -40 to 150°C, and supports 115/230VAC mains connector rating. Ideal for cable mounting applications due to its compact dimensions of 0.972" x 1.043" x 0.689".
AT06-2S-KIT01
Amphenol
The Amphenol AT06-2S-KIT01 is a Combination Line Connector with dimensions of 0.713" x 0.591" x 1.181". It has an operating temperature range of -55 to 125°C and can handle a rated current of 13A. This female connector with round pin sockets is suitable for cable mounting applications.
19418-0005
Molex
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
1318386-1
TE Connectivity 1318386-1 is a Combination Line Connector with dimensions of 0.827"x.78"x.622". It has 16 contacts, rated for 12V and operating temperatures from -30 to 105°C. Used in cable mounting applications, it features POLYBUTYLENE TEREPHTHALATE insulator material and UL certification.
967631-1
TE Connectivity's 967631-1 is a Combination Line Connector with dimensions of 0.885" x 1.082" x 1.318". It features 9 contacts, operates b/w -40°C to 140°C, and supports mains connector rating of 115/230VAC. Ideal for board mounting applications requiring male contact gender in a three-row configuration.
DTP04-2P-EE01
TE Connectivity's DTP04-2P-EE01 is a 2.364" x 0.872" x 0.848" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It operates b/w -55°C to 125°C, UL certified with polarization key for male contacts. Ideal for cable mounting applications requiring a polarized receptacle with strain relief.
DTM06-2S-EP10
TE Connectivity's DTM06-2S-EP10 is a 1.145" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL94V-0 flammability code, and a polarization key. Ideal for applications requiring a polarized, crimped female connector with strain relief on cables.
13795018
Aptiv
Aptiv's 13795018 Combination Line Connector features 24 FEMALE contacts in a 2-row configuration. With dimensions of 2.82" x 1.206" x 1.957", it is made of GLASS FILLED POLYBUTYLENE TEREPHTHALATE, suitable for applications requiring a max operating temperature of 125°C.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
DTP06-2S-E004
TE Connectivity's DTP06-2S-E004 is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarization key, female contact gender, and supports up to 25A signal current. Ideal for cable mounting applications requiring a polarized housing with strain relief.
282105-1
TE Connectivity 282105-1 is a Combination Line Connector with dimensions of 1.016" x 0.543" x 1.654". Rated for 24V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 3 contacts and a rated current of 14A.
15326842
Aptiv's 15326842 Combination Line Connector has dimensions of 1.287" x 1.228" x 1.11". With POLYAMIDE insulator, it operates b/w -40°C to 125°C. Featuring BRASS contacts, it is a female connector with 10 contacts for signal current up to 11 A, suitable for commercial applications requiring reliable crimp termination in cable mounting setups.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
770680-1
TE Connectivity's 770680-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 23 contacts, rated at 17A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications with solder termination and polarized key design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT04-4P-KIT01
The Amphenol AT04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 13A signal current. It features a body size of 0.827" x 0.772" x 1.811", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
AT04-3P-RY01
AT04-3P-RY01 by Amphenol is a combination line connector with a body length of 1.933" and depth of 1.91". It has a max operating temperature of 125°C and min operating temperature of -55°C. This male receptacle connector has 9 contacts and can handle a rated current of 13A, making it suitable for various applications requiring reliable signal transmission.
AT04-2P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Body Width: .669 inch; No. of Rows Loaded: 1;
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
AT04-2P-SR01BLK
The Amphenol AT04-2P-SR01BLK is a male combination line connector with 2 contacts, rated for 13A signal current. Its polyethylene insulator allows operation b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact dimensions of 0.673" x 0.669" x 2.193".
AT04-2P-SR02BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Body Length: .673 inch; Body Depth: 2.193 inch;
AT04-12PA-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Maximum Operating Temperature (Cel): 125;
AT04-2P-KIT01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 2; Body Length: .673 inch;
AT04-3P-PM12
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Mounting Type: CABLE AND PANEL;
AT04-4P-RD01
Amphenol's AT04-4P-RD01 is a male combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 0.826" x 0.771" x 1.811", it features a polyethylene body and shell, suitable for cable mounting applications in various industries.
AT04-2P-BLK
AT04-2P-BLK by Amphenol is a combination line connector with dimensions of 0.673" x 0.669" x 1.717". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector has 2 contacts, rated for a signal current of 13A, and is designed for cable mounting with crimp termination. Its insulator material is made of polyethylene.
AT04-3P
The Amphenol AT04-3P is a combination line connector with 3 contacts, rated at 13A. It has a body size of 0.961" x 0.827" x 1.7", made of polyethylene for -55 to 125°C applications. This male receptacle connector uses square pin/socket contact style and crimp termination for cable mounting with mating part AT04-3S.
AT04-12PA
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
AT04-3P-L012
The Amphenol AT04-3P-L012 is a male combination line connector with 3 contacts, rated for 13A signal current. Its polyethylene insulator can withstand temperatures from -55°C to 125°C. With a body size of 1.594" x 1.252" x 1.701", it is suitable for cable and panel mounting applications.
AT04-4P-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Body Width: 1.46 inch; Total No. of Contacts: 4;
AT04-4P-MM01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
AT04-12PA-SRGRY
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; No. of Rows Loaded: 2; Insulator Material: POLYETHYLENE;
AT04-3P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .961 inch; Rated Current - Signal: 13 A; Contact Material: NOT SPECIFIED;
AT04-3P-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: WIRE; Insulator Material: POLYETHYLENE; Mounting Type: CABLE;
AT04-4P
The Amphenol AT04-4P is a combination line connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 1.811", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic systems requiring reliable female contact connections.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved