Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 34690-0160 is a Combination Line Connector with 16 contacts, rated at 10A. It features Brass contact material, Matte Tin finish, and Glass Filled Polystyrene insulator. Suitable for board mounting applications with male gender contacts and hybrid style. Operating temperature range from -40 to 100°C.
Median Price
$1.520
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
Verical
1+ parts
$1.440
100+ parts
-
1k+ parts
$1.360
10k+ parts
$1.130
Mouser Electronics
$2.130
$1.610
$1.370
$1.300
Newark
$2.440
$1.950
$1.640
DigiKey
$2.560
Element14
$3.060
Master Electronics
$1.350
$1.290
$1.070
Powell Electronics
$1.280
$1.250
Farnell
$1.230
$1.210
Chip1Stop
$1.340
$0.832
TTI
TTI Europe
Nova Conductors
$1.400
TestEquity
TME
$2.040
$1.220
Digiode
$2.432
Vyrian
Sensible Micro Corp
IBS Electronics
$1.627
$1.529
$1.262
VNN
Electronics Depot
Argo Parts USA
Continental Prestige Electronics
$1.760
$1.060
$0.981
Corphita
$2.304
Andel Nordic
$3.819
$3.666
Perfect Parts
Kepictronics
Abacus Technologies
Netroflash
$1.372
$1.330
$1.302
Assy Fe
The compact size of the body makes this connector suitable for applications where space is limited.
Having mixed contacts allows for versatility in connecting different types of signals within a single connector.
This finish provides a durable and reliable connection, ensuring minimal signal loss and degradation.
The use of high-quality insulator material ensures excellent electrical insulation and protection.
The high maximum operating temperature makes this connector suitable for use in various environments with different temperature ranges.
The high rated current allows for the transmission of relatively high-power signals, making this connector suitable for various applications.
The ample number of contacts provides flexibility in connecting multiple signals or components within a single connector.
The board mounting type simplifies the installation process, making it easy to integrate this connector into existing PCB designs or systems.
The male contact gender ensures compatibility with standard female connectors, allowing for easy and secure connections.
The hybrid contact style combines the benefits of different contact designs, such as power and signal contacts, in a single connector, providing versatility in application use.
Combination Line Connectors 34690-0160 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
JESD-609 Code:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
34690-0160 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 34690, 34691, Series 03/Jul/2015 Multiple Devices Tooling Improvement 02/Sep/2014
PCN Assembly/Origin - Multiple Devices Additional Supplier 25/Aug/2020
PCN Packaging - Mult Devs Cancel Packaging Change 28/Dec/2023 Mult Devs Packaging 14/Sep/2023
PCN Other - 34690,34691,34936 Series Inspection 09/Jan/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
Formosa Microsemi
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Meritek Electronics
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MC7805CTG
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
SS14
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Forward Voltage (VF): .5 V;
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Zetex Plc
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DT04-12PB-BL04
TE Connectivity
TE Connectivity's DT04-12PB-BL04 is a 2-row Combination Line Connector with 12 contacts, rated at 250V and 13A. Featuring GLASS FILLED POLYAMIDE insulator, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring crimp termination and polarized keying.
12162000
Aptiv
Aptiv's 12162000 is a Combination Line Connector with POLYAMIDE66 insulator. It has 2 contacts, male gender, and crimp termination. Used for cable mounting applications with mating info 12052641.
12176836
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;
DTM13-12PA-12PB-GR01
TE Connectivity's DTM13-12PA-12PB-GR01 is a Combination Line Connector with dimensions 1.453" x 3.976" x 1.453". It has a rated voltage of 250V, operates b/w -55°C to 125°C, and supports up to 24 contacts. Ideal for board mounting applications requiring a male contact gender and right-angle mounting style at a max current of 7.5A.
DT04-6P-L012
TE Connectivity's DT04-6P-L012 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and panel mounting option.
12052848
Aptiv's 12052848 is a Combination Line Connector with POLYAMIDE6 insulator. It has 6 contacts, female gender, and crimp termination. Used for cable mounting applications, mating info is 12124107 with an empty shell design.
1-770166-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; MIL Conformity: NO; Empty Shell: NO;
350777-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Total No. of Contacts: 2; Insulator Material: POLYAMIDE;
1-1718643-1
TE Connectivity 1-1718643-1 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, rated at 25A for signal current. Ideal for applications requiring polarized connectors in temperatures ranging from -40 to 130°C.
DT06-08SA-P012
TE Connectivity's DT06-08SA-P012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 8 contacts and operates b/w -55 to 125 °C. Ideal for cable mounting applications, it features female contact gender and crimp termination type.
DT06-08SA-EP06
TE Connectivity's DT06-08SA-EP06 is a Combination Line Connector with 8 contacts, rated voltage of 250V, and UL Flammability Code of 94V-0. It features GLASS FILLED POLYAMIDE insulator material and operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, crimp termination female connector with plug body style.
DTM04-08PA-EE04
TE Connectivity's DTM04-08PA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DT04-12PB
TE Connectivity's DT04-12PB is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a total of 12 contacts and operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, crimped male connector with strain relief.
DTM06-08SA-EE04
TE Connectivity's DTM06-08SA-EE04 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring UL-certified connectors with polarized design and strain relief option.
1600280013
Molex
Molex 1600280013 is a Combination Line Connector with 32 contacts, SYNDIOTACTIC POLYSTYRENE insulator. It has dimensions of 1.293" x 0.775" x 1.079", suitable for cable mounting applications. Operating temperature range from -40°C to 85°C, making it ideal for various industrial uses.
1318917-1
TE Connectivity's 1318917-1 is a Combination Line Connector with dimensions of 0.827" x 1.126" x 0.622". It has 24 contacts, rated for 12V and operating temperatures from -30 to 105°C. Used in applications requiring a polarized, UL-standard connector with female contacts for crimp termination on cables.
AT06-12SC
Amphenol
The Amphenol AT06-12SC is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-12PC connectors, featuring female contact gender and plug body style.
DTF13-6P
DTF13-6P by TE Connectivity is a combination line connector with 6 contacts, rated for 13A signal current at 250V. Featuring a right-angle mounting style and solder termination, it is ideal for board mounting applications in temperatures ranging from -55°C to 125°C. The connector's UL-certified design ensures safety and reliability in various electronic systems.
AT06-12SC-MM01
The Amphenol AT06-12SC-MM01 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector features round pin-socket contact style.
1-1563759-1
TE Connectivity 1-1563759-1, a Combination Line Connector with 18 contacts, rated voltage of 60V and current of 20A. Ideal for cable mounting applications, featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operating temperatures from -40 to 140°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34691-0200
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
34690-0201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: YES; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; No. of Rows Loaded: 2;
34691-0080
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
34691-0160
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED;
34691-0202
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34691-0120
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; JESD-609 Code: e3;
34690-0080
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VDC; No. of Connectors: ONE;
34690-0200
Molex 34690-0200 is a Combination Line Connector with 20 contacts, rated at 10A. It features high temp thermoplastic insulator material and matte tin over nickel termination finish. Ideal for board mounting applications in commercial settings, offering durability of 10 cycles and operating temperatures from -40 to 100°C.
34691-0201
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL;
34690-0161
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e3;
34690-0081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 10 A; Body Length: .868 inch; Mounting Type: BOARD;
34690-0082
34690-0120
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Body Length: .94 inch; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34690-0121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Style: HYBRID; Contact Material: BRASS;
34690-0122
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 12; No. of Rows Loaded: 2; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34690-0162
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Maximum Operating Temperature (Cel): 100; Empty Shell: NO;
34690-0202
Molex 34690-0202 is a Combination Line Connector with 20 contacts, rated at 10A. It features mixed contacts, matte tin over nickel finish, and glass-filled syndiotactic polystyrene insulator material. Ideal for board mounting applications with male contact gender and hybrid contact style.
34690-0203
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Minimum Operating Temperature: -40 Cel; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34695-9100
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.104 inch; Body Length: 1.34 inch; Minimum Operating Temperature: -40 Cel;
34695-9101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 10; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved