Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT06-4S-CE13 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
Median Price
$2.780
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$2.719
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$2.750
$2.250
$1.430
$1.340
Mouser Electronics
$2.810
$2.380
$2.270
Master Electronics
$3.086
$2.124
$2.009
$1.989
DigiKey
$3.630
$2.625
$2.288
$2.075
Element14
$4.713
Newark
$8.300
$6.210
$5.160
Future Electronics
$1.840
$1.780
TTI Europe
$1.761
$1.674
TTI
$1.850
$1.820
Verical
VNN
$1.720
Digiode
$1.862
Nova Conductors
$3.230
IBS Electronics
$2.581
$2.496
NAC Semi
$3.150
Bristol Electronics
Vyrian
LJR Electronics
Extreme Components
Electro Sonic
$3.420
$2.210
$2.120
TME
$2.943
$2.490
ABC Electronics Ltd.
Semicontronic
$1.500
$1.462
$1.455
Corphita
$1.764
Continental Prestige Electronics
$2.271
$2.225
Argo Parts USA
Netroflash
$3.069
$3.004
Aztec Data Supply Inc.
$6.646
Advanced Electronics
$10.309
$9.794
Authorized Procurement Solutions
ErreBi Group
Abacus Technologies
Robosynatics
$0.010
Lucentia Tech
Perfect Parts
EMSNET (Excess)
Resion (Excess)
1.701 inch - The compact size of the body makes this connector suitable for limited space applications.
0.814 inch - The slim width of the body allows for easy installation in tight spaces.
0.773 inch - The shallow depth of the body makes it ideal for applications where space is limited.
250 V - The high voltage rating ensures reliable and safe operation in various electrical systems.
GLASS FILLED POLYAMIDE - The use of durable and heat-resistant insulator material ensures long-lasting performance.
2 - The multiple rows loaded design allows for efficient and organized connectivity.
125 - The high operating temperature range makes this connector suitable for use in various environments.
55 °C - The low operating temperature capability ensures reliable performance even in extreme cold conditions.
YES - The empty shell design offers flexibility for custom configurations and applications.
COMBINATION LINE CONNECTOR - The versatile connector type allows for multiple types of connections in one unit.
94V-0 - The UL flammability rating ensures safety and compliance with industry standards.
POLARIZED - The polarization key feature helps in proper alignment and secure connections.
13 A - The high signal current rating allows for efficient transmission of power.
UL - The UL reference standard ensures quality and reliability of the product.
4 - The multiple contact points enable secure and stable connections.
ONE - The single connector design simplifies installation and maintenance.
0.359 - The optimal spacing allows for easy mating of contacts.
CABLE - The cable mounting type offers versatility in installation options.
4.45 - The standard terminal pitch allows for compatibility with a wide range of connectors.
13A - The high mains connector rating ensures reliable power transmission.
CRIMP - The crimp termination type offers a secure and durable connection.
FEMALE - The female contact gender ensures compatibility with a variety of male connectors.
PLUG - The plug style body design offers easy and convenient connections.
RND PIN-SKT - The round pin and socket contact style provides a reliable connection.
W/STRAIN RELIEF - The strain relief mounting option ensures secure and stable installation.
Combination Line Connectors DT06-4S-CE13 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT06-4S-CE13 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Product Improvement 15/May/2019
PCN Assembly/Origin - Tooling Capacity 29/APR/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021 Position Assembly Process and Packaging Chg 03/OCT/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
Toshiba
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
First Components International
Nexperia
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
DT04-08PA-E005
TE Connectivity's DT04-08PA-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-rated connector with crimp termination and strain relief mounting option.
0-0350777-1
TE Connectivity 0-0350777-1 is a Combination Line Connector with 0.55"x.58"x1.08" dimensions, NYLON insulator, and -55 to 105°C operating range. It has 2 contacts, S0P2 arrangement, and male gender for cable mounting applications in commercial settings.
DT06-2S-E003
TE Connectivity's DT06-2S-E003 is a 1.228" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring UL 94V-0 flammability code, it has 13A signal current rating and glass-filled polyamide insulator for cable mounting applications.
1-929504-1
TE Connectivity's 1-929504-1 is a Combination Line Connector with dimensions of 0.728" x 0.629" x 1.16". It features POLYBUTYLENE TEREPHTHALATE insulator, rated for 20A current and operating temperatures from -40 to 130 °C. Ideal for cable mounting applications requiring polarized female connectors with two loaded rows.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT15-12PA-B028
TE Connectivity's DT15-12PA-B028 is a 2-row combination line connector with 250V rated voltage and 13A signal current. With a body length of 1.555" and width of 2.331", it operates b/w -55°C to 125°C, suitable for panel mounting applications requiring solder termination in male receptacle connectors.
207365-7
The TE Connectivity 207365-7 is a Combination Line Connector with dimensions of 1.451" x 0.5" x 0.689". It has a rated voltage of 600V and operating temperature range from -55°C to 130°C. This male connector with 3 contacts, suitable for board mounting, offers a current rating of 7.5A and features POLYAMIDE66 insulator material.
15316895
Aptiv
COMBINATION LINE CONNECTOR;
12040977
Aptiv's 12040977 is a Combination Line Connector with POLYAMIDE66 insulator. It has 3 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 15300003, featuring an empty shell design for versatile connectivity solutions.
ATP04-4P
Amphenol
The Amphenol ATP04-4P is a Combination Line Connector with 4 contacts, rated for 25A signal current. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a male contact gender and round pin/socket style.
DTM04-6P-E004
TE Connectivity's DTM04-6P-E004, a 1.72" x 0.756" x 0.937" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 6 contacts, UL94V-0 flammability code, and male gender for cable mounting applications at 7.5A signal current.
93444-6121
Molex
Molex 93444-6121 is a Combination Line Connector with dimensions 1.608" x 0.873" x 2.131". It has 12 contacts, glass-filled polyamide insulator, and male crimp termination. Ideal for cable mounting applications requiring a receptacle connector with round pin/socket contact style.
54200206
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; No. of Rows Loaded: 1; Filter Feature: NO;
AT06-12SA-SRBK
AT06-12SA-SRBK by Amphenol is a combination line connector with dimensions of 1.772" x 0.827" x 1.713". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This connector has 12 contacts, rated current of 13A, and is commonly used for cable mounting applications.
348302002
Molex 348302002 is a Combination Line Connector with 20 contacts, made of Copper Alloy. It features Matte Tin finish with Nickel barrier and Glass Filled Polybutylene Terephthalate insulator material. Ideal for board mounting applications due to its compact size of 2.552" x 0.826".
64320-1319
Molex 64320-1319 is a COMBINATION LINE CONNECTOR with POLYBUTYLENE TEREPHTHALATE insulator. It has 48 FEMALE contacts, RND PIN-SKT style, and operates b/w -40°C to 125°C. Ideal for applications requiring high contact density and temperature resistance.
AW4S
ATM15-4P-BM03
The Amphenol ATM15-4P-BM03 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 7.5A for signal current, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring female contact gender and SQ PIN-SKT style connectors.
DTP04-4P-P052
TE Connectivity's DTP04-4P-P052 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for panel mounting applications requiring a polarized male connector with UL certification.
15300003
Aptiv's 15300003 is a Combination Line Connector with POLYAMIDE66 insulator. It has 3 male contacts for cable mounting and crimp termination. Ideal for automotive applications requiring reliable electrical connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
DT06-6S
TE Connectivity's DT06-6S is a 6-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications in commercial settings due to its durability, polarization key feature, and UL reference standard compliance.
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
TE Connectivity's DT06-3S is a 3-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications, this female connector features nickel termination finish and glass-filled polyamide insulator material.
DT06-2S-E008
TE Connectivity's DT06-2S-E008 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DT06-2S-C015
TE Connectivity's DT06-2S-C015 is a 1.118" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring glass-filled polyamide insulator, it has 13A signal current rating and UL flammability code of 94V-0. Ideal for cable mounting applications, this polarized connector offers crimp termination and female contact gender.
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-2S-CE05
TE Connectivity's DT06-2S-CE05 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 13A signal current capacity. Ideal for cable mounting applications requiring crimp termination.
DT06-2S
TE Connectivity's DT06-2S is a 1.118" combination line connector with insulation resistance of 1000000000 ohm, rated voltage of 250V, and operating temperature range from -55 to 125 °C. It features a glass-filled polyamide insulator and is ideal for commercial applications requiring a durable, polarized female connector with crimp termination.
DT06-12SA-CE06
TE Connectivity's DT06-12SA-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-12SA-P012
TE Connectivity's DT06-12SA-P012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-4S-E008
TE Connectivity's DT06-4S-E008 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL flammability rating of 94V-0.
DT06-12SA-C015
TE Connectivity's DT06-12SA-C015 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-2S-P012
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
DT06-12SA
TE Connectivity's DT06-12SA is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL certification and polarization key for secure connections.
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved