Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DTM04-2P is a 1.62" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL certification, and polarized design. Ideal for applications requiring a 7.5A signal current in cable mounting setups with crimp termination and strain relief option.
Median Price
$1.510
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Boersig
1+ parts
$0.746
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.480
$1.040
$0.892
$0.836
RS (Exports)
$1.260
$1.170
TE Connectivity
$1.500
RS Americas
$1.700
$1.340
$1.190
DigiKey
$1.780
$1.284
$1.091
$1.023
Newark
$2.010
$1.490
$1.300
$1.230
Distrelec
$2.015
$1.656
$1.558
Arrow
$2.048
$1.244
$1.131
Conrad
$2.168
$1.928
TTI
$0.960
$0.920
Future Electronics
$0.770
$0.740
$0.705
Master Electronics
$1.271
$0.944
$0.870
TTI Europe
$0.882
$0.795
Verical
$1.622
$1.125
$1.061
Chip1Stop
$1.520
Vyrian
$0.560
Digiode
$0.709
Nova Conductors
$1.158
TME
$1.360
$1.000
$0.940
CustomConnectorKits
$1.990
$1.680
DF Sales Co.
$2.000
Component Electronics Inc.
$2.080
$1.560
$1.350
IBS Electronics
$0.912
$0.898
$1.381
NAC Semi
$1.770
Goldney Electronics S.L.
Q Components
ABC Electronics Ltd.
Diverse Electronics
Bisco
Sunrise Surplus Inc.
Bristol Electronics
Masline Electronics Inc.
Elcom Components
Beltway Electronics Company
A2Z Electronics, Inc.
Corphita
$0.671
Eastek
$0.950
Argo Parts USA
$1.021
Modulus Dynamics
$1.133
$1.121
$1.088
Aranea Global
$1.134
$1.089
Advanced Electronics
$1.335
$1.268
Semicontronic
$1.380
$1.346
$1.339
Aztec Data Supply Inc.
$4.360
Continental Prestige Electronics
$6.830
$1.280
$0.915
Allen Electronics Distributors
$271.000
$178.000
$93.000
Authorized Procurement Solutions
ErreBi Group
EMSNET (Excess)
Benley Electronics
Abacus Technologies
Assy Fe
Robosynatics
Lucentia Tech
$2.002
Resion (Excess)
Provides a sufficient amount of space for the connectors to be securely attached.
Suitable for high voltage applications, ensuring safe and reliable operation.
Offers excellent insulation properties, enhancing the overall durability of the connectors.
Can withstand high temperatures, making it suitable for a wide range of operating environments.
Capable of functioning in low-temperature conditions, providing flexibility in usage.
Specifically designed for combination line connections, ensuring compatibility and efficiency.
Meets stringent safety standards for flammability, offering peace of mind during use.
Allows for the transmission of signals with a sufficient current capacity, ensuring reliable signal transfer.
Sufficient number of contacts for connection purposes, enabling effective communication.
Crimping provides a secure and reliable method of termination for the connectors.
Includes strain relief for added protection against cable damage, enhancing overall longevity.
Combination Line Connectors DTM04-2P attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DTM04-2P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Manufacturing process chg 27/JAN/2023
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
BAV99
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N7002
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM358N
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
Toshiba
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1554216002
WIRE AND CABLE;
1N5819HW-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DRC13-40PA-CG01
TE Connectivity's DRC13-40PA-CG01 is a 4-row combination line connector with dimensions of 1.39" x 3.742". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, this male connector has a solder termination type and UL flammability rating of 94V-0.
DT06-12SA-CE06
TE Connectivity's DT06-12SA-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT06-12SC
TE Connectivity's DT06-12SC is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
776164-1
TE Connectivity's 776164-1 is a POLYBUTYLENE TEREPHTHALATE Combination Line Connector with 35 contacts, rated at 17A. It operates b/w -40 to 125 °C and features UL Flammability Code of 94V-0. Ideal for applications requiring a polarized, crimped female plug with strain relief mounting option.
DT04-4P-CE01
TE Connectivity's DT04-4P-CE01 is a Combination Line Connector with 4 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
DRC22-40PA
TE Connectivity's DRC22-40PA is a 1.5"x2"x3.7" combination line connector with 40 contacts, rated at 250V and 7.5A for signal current. Made of POLYAMIDE, it operates b/w -55°C to 125°C and is ideal for cable mounting applications requiring polarization key and strain relief option.
DT04-12PA-CE07
TE Connectivity's DT04-12PA-CE07 is a Combination Line Connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL certification and strain relief mounting option.
15300027
Aptiv
Aptiv's 15300027 is a Combination Line Connector with POLYAMIDE66 insulator. It has 2 contacts, female gender, and crimp termination. Used for cable mounting, mating with 15300002 connector shell, ideal for automotive applications.
3-1418390-1
TE Connectivity's 3-1418390-1 is a Combination Line Connector with dimensions of 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, ideal for cable mounting applications at up to 40A signal current.
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
282089-1
TE Connectivity's 282089-1 is a Combination Line Connector with 0.236" pitch, rated for 24V and 14A signal current. Featuring glass-filled polyamide construction, it offers high durability with 10 cycles and operates b/w -40 to 125°C. Ideal for cable mounting applications, this connector has a total of 5 contacts and female contact gender.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
DT06-08SA-CE06
TE Connectivity's DT06-08SA-CE06 is a 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
AT06-2S-KIT01
The Amphenol AT06-2S-KIT01 is a Combination Line Connector with dimensions of 0.713" x 0.591" x 1.181". It has an operating temperature range of -55 to 125°C and can handle a rated current of 13A. This female connector with round pin sockets is suitable for cable mounting applications.
12033871
COMBINATION LINE CONNECTOR;
154719
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; UL Flammability Code: 94V-2; Insulator Material: POLYAMIDE; MIL Conformity: NO; IEC Conformity: NO;
12015799
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; DIN Conformance: NO; Mixed Contacts: NO;
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
12162144B
12162144B by Aptiv is a Combination Line Connector with 4 contacts, rated at 14A signal current. It has a temperature range of -40 to 125°C, suitable for various applications. The connector features female contact gender and round pin-socket style, ideal for cable mounting with an empty shell design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
DTM06-12SA
TE Connectivity's DTM06-12SA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
DTM04-2P-E007
TE Connectivity's DTM04-2P-E007 is a 2.005" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, polarized key, and male gender suitable for cable mounting applications at 7.5A signal current.
DTM04-2P-P006
TE Connectivity's DTM04-2P-P006 is a 1.68" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator for 250V, -55 to 125 °C operation. It features UL 94V-0 flammability, polarized key, and male contact gender suitable for cable mounting applications at 7.5A signal current rating.
DTM06-12SA-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 1.245 inch; Mounting Option-2: W/STRAIN RELIEF;
DTM04-2P-EP10
TE Connectivity's DTM04-2P-EP10 is a 1.68"x.651"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 7.5A signal current. Ideal for cable mounting applications requiring a male receptacle contact style with strain relief option.
DTM06-2S-P006
DTM06-2S-P006 by TE Connectivity is a combination line connector with dimensions of 1.145" x 0.569" x 0.508". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 7.5A.
DTM04-2P-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; Contact Style: RND PIN-SKT;
DTM06-2S-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Mounting Option-2: W/STRAIN RELIEF;
DTM06-12SA-EE04
TE Connectivity's DTM06-12SA-EE04 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
DTM04-2P-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.68 inch; IEC Conformity: NO;
DTM06-2S-EP10
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: CRIMP; Rated Voltage: 250 V;
DTM04-2P-EE03
TE Connectivity's DTM04-2P-EE03 is a combination line connector with 2.005"x.651"x.638" dimensions, rated for 250V and 125°C. Ideal for applications requiring a polarized male receptacle with UL certification, suitable for signal currents up to 7.5A in cable mounting setups with strain relief option available.
DTM06-2S-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: CABLE; Body Depth: .508 inch;
DTM06-2S-E003
TE Connectivity's DTM06-2S-E003 is a 1.145" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 7.5A signal current rating. Ideal for cable mounting applications requiring crimp termination and strain relief.
DTM06-2S-EE03
TE Connectivity's DTM06-2S-EE03 is a 1.47" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring polarized housing, UL 94V-0 flammability code, and crimp termination, it's ideal for cable mounting applications requiring a 7.5A signal current.
DTM04-6P-E004
TE Connectivity's DTM04-6P-E004, a 1.72" x 0.756" x 0.937" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 6 contacts, UL94V-0 flammability code, and male gender for cable mounting applications at 7.5A signal current.
DTM04-6P-E003
TE Connectivity's DTM04-6P-E003 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DTM06-12SB-E007
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO; Rated Voltage: 250 V;
DTM04-6P-LS
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Insulator Material: GLASS FILLED POLYAMIDE; Polarization Key: POLARIZED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved