Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 34690-0201 is a Combination Line Connector with 20 contacts, rated at 10A signal current. It features mixed contacts, brass contact material, and matte tin finish over nickel barrier. Ideal for board mounting applications in environments ranging from -40°C to 100°C.
Median Price
$1.905
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$1.311
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.120
$2.250
$2.010
$1.700
Master Electronics
$2.040
$1.930
$1.500
Newark
$2.370
$2.110
Verical
$1.970
$1.870
$1.440
Powell Electronics
$1.850
$1.760
$1.600
Chip1Stop
$1.580
$1.480
$1.210
Farnell
$1.450
DigiKey
$1.960
TTI
$1.660
$1.610
Digiode
$1.245
Nova Conductors
$1.705
TestEquity
Rapid Electronics
$2.328
IBS Electronics
$1.837
$1.750
$1.188
Vyrian
VNN
Semicontronic
$0.980
$0.956
$0.951
Corphita
$1.180
Continental Prestige Electronics
$1.671
Argo Parts USA
Netroflash
$1.620
$1.586
Aztec Data Supply Inc.
$2.272
Andel Nordic
$6.875
$6.600
Kepictronics
Assy Fe
Perfect Parts
Authorized Procurement Solutions
EMSNET (Excess)
Eastek
The compact size of the body length makes this connector suitable for applications where space is limited.
Having mixed contacts allows for versatility in connecting different types of signals or power sources, making this connector adaptable to various needs.
The slim width of the body makes it easy to fit this connector into tight spaces on a board or device.
The quality finish of the termination contacts ensures a reliable connection and prevents corrosion, extending the connector's lifespan.
With a high number of contacts, this connector offers ample connectivity options for various signals and power sources in a single compact unit.
The high maximum operating temperature allows this connector to be used in a wide range of environments without risk of overheating or malfunction.
The low minimum operating temperature ensures this connector can perform reliably even in cold conditions, making it suitable for diverse applications.
The brass contact material provides excellent conductivity and durability, ensuring a stable connection over time.
With a high signal current rating, this connector can handle power-intensive signals without risk of overheating or damage.
The versatile design of a combination line connector allows for multiple types of connections in a single unit, reducing the need for multiple connectors for different signals.
Combination Line Connectors 34690-0201 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
JESD-609 Code:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
34690-0201 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Tooling Improvement 02/Sep/2014
PCN Assembly/Origin - Multiple Devices Additional Supplier 25/Aug/2020
PCN Packaging - Mult Devs Cancel Packaging Change 28/Dec/2023 Mult Devs Packaging 14/Sep/2023
PCN Other - 34690,34691,34936 Series Inspection 09/Jan/2015
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Commercial Components
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Vishay Telefunken
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
DT06-08SA-CE10
TE Connectivity
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
776228-1
TE Connectivity's 776228-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, 2.394" Body Length, and 100000000 ohm Insulation Resistance. Ideal for board mounting applications in commercial settings due to its UL Flammability Code of 94V-0 and rated current of 8A.
DTP04-4P-P052
TE Connectivity's DTP04-4P-P052 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C. Ideal for panel mounting applications requiring a polarized male connector with UL certification.
DF62W-9S-2.2C
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
12047662
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-2: LOCKING;
ATM15-08PA-BM03
Amphenol
The Amphenol ATM15-08PA-BM03 is a Combination Line Connector with 8 contacts, rated at 7.5A signal current. It has a body size of 2.071" x 1.303" x 1.189", made of POLYETHYLENE for -55 to 125°C applications. Ideal for board and panel mounting, featuring male contact gender with round pin sockets for various electronic connections.
1-1418390-1
TE Connectivity 1-1418390-1 is a Combination Line Connector with dimensions 1.693" x 1.012" x 1.23". Rated for 60V, it operates b/w -40°C to 140°C, suitable for cable mounting applications at up to 40A signal current.
AT06-6S-OMBLK
The Amphenol AT06-6S-OMBLK is a combination line connector with 6 contacts, rated for 13A signal current. It has a compact body size of 0.882" x 0.874" x 1.815", suitable for cable mounting applications. With an operating temperature range from -55°C to 125°C, it uses crimp termination and mates with AT06-6P-OMBLK connectors.
776428-1
TE Connectivity 776428-1 is a Combination Line Connector with dimensions of 0.772"x1.872"x.745". It has a rated voltage of 250V and operating temperature range from -40 to 125°C. This connector, featuring GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material, is ideal for applications requiring a polarized, crimp termination male contact style connector with 13A signal current rating.
12065686
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Total No. of Contacts: 4; Insulator Material: POLYBUTYLENE TEREPHTHALATE;
AT04-12PA-LE14
COMBINATION LINE CONNECTOR;
DT06-6S-CE01
The TE Connectivity DT06-6S-CE01 is a Combination Line Connector with dimensions of 1.268" x 0.82" x 0.946". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is ideal for applications requiring a polarized, female contact style with crimp termination.
32006-C22
Eaton Corporation
Eaton Corporation's 32006-C22 is a COMBINATION LINE CONNECTOR with 8 contacts in 2 rows. It has dimensions of 1.571" x 1.035" x 1.213". Ideal for cable mounting, this male connector is suitable for various applications requiring reliable connection solutions.
2324808-1
TE Connectivity 2324808-1 is a Combination Line Connector with dimensions of 1.306" x 0.649" x 0.621". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125 °C. Ideal for applications requiring a polarized connector with UL Flammability Code of 94V-0.
DT04-12PB-B016
TE Connectivity's DT04-12PB-B016 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
776487-1
TE Connectivity's 776487-1 is a Combination Line Connector with dimensions of 0.997" x 1.445" x 1.055". It has a rated voltage of 250V, insulator material GLASS FILLED POLYBUTYLENE TEREPHTHALATE, and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with 4 contacts and a current rating of 13A.
DTP06-2S-E003
TE Connectivity's DTP06-2S-E003 is a 1.434" x 0.867" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. Featuring UL certification, it has 2 contacts, 25A signal current, FEMALE gender, and PLUG body style for CABLE mounting applications.
AT04-4P-BLK
The Amphenol AT04-4P-BLK is a combination line connector with 2 rows, rated for 13A signal current. With a temperature range of -55 to 125°C, it features male contact gender and round pin/socket style. Ideal for cable mounting applications, mating with AT04-4S-BLK connectors.
AT04-3P-RD01
The Amphenol AT04-3P-RD01 is a male receptacle combination line connector with 3 contacts. It has a max operating temperature of 125°C and rated current of 13A. Ideal for cable mounting applications requiring reliable signal transmission in harsh environments.
1318774-1
TE Connectivity's 1318774-1 is a Combination Line Connector with dimensions of 0.827" x 0.606" x 0.622". It has 12 contacts, rated at 12V and operating b/w -30 to 105°C. This female connector, made of POLYBUTYLENE TEREPHTHALATE, is ideal for cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
34691-0200
Molex
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
34691-0080
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e3;
34691-0160
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Termination Contact Finish: MATTE TIN OVER NICKEL; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED;
34691-0202
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Contact Material: BRASS; JESD-609 Code: e3; Mating Contact Finish: NOT SPECIFIED;
34691-0120
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Material: COPPER ALLOY; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; JESD-609 Code: e3;
34690-0080
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 500VDC; No. of Connectors: ONE;
34690-0160
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Contact Style: HYBRID; Mounting Type: BOARD;
34690-0200
Molex 34690-0200 is a Combination Line Connector with 20 contacts, rated at 10A. It features high temp thermoplastic insulator material and matte tin over nickel termination finish. Ideal for board mounting applications in commercial settings, offering durability of 10 cycles and operating temperatures from -40 to 100°C.
34691-0201
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; JESD-609 Code: e3; Contact Material: BRASS; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: MATTE TIN OVER NICKEL;
34690-0161
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; JESD-609 Code: e3;
34690-0081
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 10 A; Body Length: .868 inch; Mounting Type: BOARD;
34690-0082
34690-0120
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Body Length: .94 inch; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34690-0121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Style: HYBRID; Contact Material: BRASS;
34690-0122
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 12; No. of Rows Loaded: 2; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34690-0162
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; Maximum Operating Temperature (Cel): 100; Empty Shell: NO;
34690-0202
Molex 34690-0202 is a Combination Line Connector with 20 contacts, rated at 10A. It features mixed contacts, matte tin over nickel finish, and glass-filled syndiotactic polystyrene insulator material. Ideal for board mounting applications with male contact gender and hybrid contact style.
34690-0203
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Matte Tin (Sn) - reflowed over Nickel (Ni) barrier; Minimum Operating Temperature: -40 Cel; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
34695-0102
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE; Contact Style: SQ PIN-SKT; Termination Type: SOLDER;
34695-9101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 10; Insulator Material: GLASS FILLED SYNDIOTACTIC POLYSTYRENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved