Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Amphenol AT04-12PA-RD01 is a Combination Line Connector with 12 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.598" x 0.882" x 1.996".
Median Price
$1.568
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$4.580
Master Electronics
$1.470
$1.330
$1.270
Verical
$1.600
$1.565
Future Electronics
$1.410
$1.350
TTI
$1.450
$1.380
$1.310
Powell Electronics
$3.350
$2.400
Nova Conductors
$1.557
Chief Enterprises
$4.990
$1.540
$1.990
$3.990
VNN
IBS Electronics
$1.935
$1.325
Electro Sonic
$1.400
NAC Semi
$2.600
Extreme Components
Vyrian
Semicontronic
$0.463
$0.451
$0.449
Aztec Data Supply Inc.
$0.980
Ampacity Inc.
$1.070
Gateway Technologies
$1.539
$1.369
Continental Prestige Electronics
$1.525
Argo Parts USA
Bastille Electronics
$1.479
$1.405
$1.386
Singapore Electronics
$1.692
$1.573
$1.505
$1.438
Advanced Electronics
$2.780
$2.641
Corohmni
$5.798
Authorized Procurement Solutions
Eastek
$2.140
Perfect Parts
EMSNET (Excess)
Abacus Technologies
GreenTree Electronics
Resion (Excess)
Longer body length allows for easier handling and connection of cables, making this product user-friendly.
The compact body width saves space and allows for more connectors to be installed in a limited space, increasing productivity.
The deep body depth provides secure connections, reducing the risk of loose connections and signal loss.
The durable polyethylene insulator material ensures long-lasting performance and protection against environmental factors.
Double rows loaded with contacts offer increased connectivity options, allowing for a wider range of applications.
With a high maximum operating temperature, this product can withstand harsh environmental conditions, ensuring reliability.
The low minimum operating temperature makes this product suitable for use in extreme cold environments, enhancing versatility.
The versatile combination line connector type can handle various types of connections, making it a practical choice for different applications.
With a high signal current rating, this product can effectively transmit signals without the risk of overheating or signal degradation.
The ample number of contacts allows for multiple connections to be made, providing flexibility in use and connectivity options.
The cable mounting type offers easy installation and flexibility in positioning, simplifying the installation process.
The crimp termination type ensures a secure and reliable connection, reducing the risk of signal loss or disconnection.
The male contact gender allows for easy connection with female connectors, ensuring compatibility with a wide range of devices.
The receptacle body style offers a secure and stable mounting option, ensuring a strong connection between devices.
The round pin socket contact style provides a reliable and stable connection, ensuring consistent signal transmission.
Combination Line Connectors AT04-12PA-RD01 attributes and parameters. Explore more Combination Line Connectors devices from Amphenol
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Rated Current - Signal:
Termination Type:
Total No. of Contacts:
AT04-12PA-RD01 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
NXP Semiconductors
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
Multicomp Pro
Itt Semiconductor
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Shandong Yiguang Electronic Joint Stock
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ECS-.327-12.5-17X-TR
Ecs International
ECS-0.327-12.5-17X-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in temperature ranges from -40 to 85 °C, such as telecommunications and industrial automation.
DTM04-12PA-L012
TE Connectivity's DTM04-12PA-L012, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 12 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a male contact gender and panel mounting with strain relief option.
2296610-1
TE Connectivity's 2296610-1 is a Combination Line Connector with dimensions of 2.005" x 0.816" x 0.638". Rated for 250V, it operates b/w -55°C to 125°C. With UL certification and 3 contacts, it is ideal for cable mounting applications requiring a male connector with strain relief.
30700-1167
Molex
The Molex 30700-1167 is a Combination Line Connector with dimensions of 1.008" x 0.928" x 1.243". It has 16 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
AT06-08SA-SR2BK
Amphenol
The Amphenol AT06-08SA-SR2BK is a 8-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operates b/w -55°C to 125°C, and features a plug body style. Ideal for cable mounting applications requiring reliable female contact pins in two rows.
8-968972-2
TE Connectivity 8-968972-2 is a Combination Line Connector with dimensions of 1.024" x 1.024" x 0.945". Rated for 28V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 120°C. With 12 contacts, it's used in applications requiring CRIMP termination at 115/230VAC mains connector rating.
AT04-4P-BLK
The Amphenol AT04-4P-BLK is a combination line connector with 2 rows, rated for 13A signal current. With a temperature range of -55 to 125°C, it features male contact gender and round pin/socket style. Ideal for cable mounting applications, mating with AT04-4S-BLK connectors.
F083110
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; No. of Rows Loaded: 1; Termination Type: CRIMP; Maximum Insertion Force (N): 20; Shell Finish: TIN;
19418-0005
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
929505-7
TE Connectivity's 929505-7 is a Combination Line Connector with dimensions of 2.51"x0.881"x1.02". It has 22 contacts, rated at 29A for signal current, and operates b/w -40°C to 130°C. Ideal for applications requiring a polarized male connector with panel mounting capabilities.
DT06-12SA-CE12
The TE Connectivity DT06-12SA-CE12 is a combination line connector with 12 contacts, rated for 250V and 13A. It features a body size of 1.701" x 0.82" x 1.597", suitable for applications requiring a max operating temperature of 125°C and min of -55°C. Ideal for cable mounting with UL certification and polarization key for secure connections.
776538-1
TE Connectivity's 776538-1 is a Combination Line Connector with dimensions of 1.126" x 1.872" x 1.049". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125°C. With UL certification, it features 8 contacts, polarized keying, and male RND PIN-SKT contact style for cable mounting applications.
12020832
Aptiv
The Aptiv 12020832 is a Combination Line Connector with dimensions of 1.48" x 0.925" x 1.535". It has a rated current of 20A and features 4 contacts for signal transmission. Ideal for cable mounting applications, it uses POLYAMIDE6 insulator material and requires crimp termination.
AT06-3S-BLK
The Amphenol AT06-3S-BLK is a combination line connector with 3 contacts, rated for 13A signal current. It has a compact body size of 0.894" x 0.724" x 1.138", suitable for cable mounting with crimp termination. Ideal for applications requiring a female contact gender and operating temperatures from -55°C to 125°C.
DT04-6P-CL06
TE Connectivity's DT04-6P-CL06 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 6 contacts and UL certification.
AT06-12SA-SR2GY
The Amphenol AT06-12SA-SR2GY is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating from -55°C to 125°C. Ideal for cable mounting applications requiring female contacts and SQ PIN-SKT style connectors.
12052641
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: CRIMP; Body Width: .732 inch;
1-85112-2
TE Connectivity 1-85112-2 is a Combination Line Connector with dimensions 1.398" x 1.697" x 1.429". It has 13 contacts, operates b/w -40°C to 85°C, and uses POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for applications requiring a polarized plug with crimp termination in cable mounting setups.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
180941
TE Connectivity 180941 is a Combination Line Connector with POLYAMIDE insulator. It has 3 contacts, operates b/w -40 to 105°C, and UL flammability rating of 94V-2. Used for cable mounting applications at 115/230VAC mains connector rating, featuring female contact gender in a receptacle shell style with latching option.
DF62W-6S-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AT04-4P-KIT01
The Amphenol AT04-4P-KIT01 is a Combination Line Connector with 4 contacts, rated at 13A signal current. It features a body size of 0.827" x 0.772" x 1.811", made of polyethylene insulator material. Ideal for cable mounting applications, it operates b/w -55°C to 125°C temperature range.
AT04-3P-RY01
AT04-3P-RY01 by Amphenol is a combination line connector with a body length of 1.933" and depth of 1.91". It has a max operating temperature of 125°C and min operating temperature of -55°C. This male receptacle connector has 9 contacts and can handle a rated current of 13A, making it suitable for various applications requiring reliable signal transmission.
AT04-2P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Body Width: .669 inch; No. of Rows Loaded: 1;
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
AT04-2P-SR01BLK
The Amphenol AT04-2P-SR01BLK is a male combination line connector with 2 contacts, rated for 13A signal current. Its polyethylene insulator allows operation b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact dimensions of 0.673" x 0.669" x 2.193".
AT04-2P-SR02BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Body Length: .673 inch; Body Depth: 2.193 inch;
AT04-12PA-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYETHYLENE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Maximum Operating Temperature (Cel): 125;
AT04-2P-KIT01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Total No. of Contacts: 2; Body Length: .673 inch;
AT04-3P-PM12
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Contact Material: NOT SPECIFIED; Mounting Type: CABLE AND PANEL;
AT04-4P-RD01
Amphenol's AT04-4P-RD01 is a male combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 0.826" x 0.771" x 1.811", it features a polyethylene body and shell, suitable for cable mounting applications in various industries.
AT04-2P-BLK
AT04-2P-BLK by Amphenol is a combination line connector with dimensions of 0.673" x 0.669" x 1.717". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector has 2 contacts, rated for a signal current of 13A, and is designed for cable mounting with crimp termination. Its insulator material is made of polyethylene.
AT04-3P
The Amphenol AT04-3P is a combination line connector with 3 contacts, rated at 13A. It has a body size of 0.961" x 0.827" x 1.7", made of polyethylene for -55 to 125°C applications. This male receptacle connector uses square pin/socket contact style and crimp termination for cable mounting with mating part AT04-3S.
AT04-12PA
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
AT04-3P-L012
The Amphenol AT04-3P-L012 is a male combination line connector with 3 contacts, rated for 13A signal current. Its polyethylene insulator can withstand temperatures from -55°C to 125°C. With a body size of 1.594" x 1.252" x 1.701", it is suitable for cable and panel mounting applications.
AT04-4P-PM11
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Body Width: 1.46 inch; Total No. of Contacts: 4;
AT04-4P-MM01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
AT04-12PA-SRGRY
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; No. of Rows Loaded: 2; Insulator Material: POLYETHYLENE;
AT04-3P-RD01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .961 inch; Rated Current - Signal: 13 A; Contact Material: NOT SPECIFIED;
AT04-3P-SR01BLK
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: WIRE; Insulator Material: POLYETHYLENE; Mounting Type: CABLE;
AT04-4P
The Amphenol AT04-4P is a combination line connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 1.811", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic systems requiring reliable female contact connections.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved