Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT06-6S-CE02 is a Combination Line Connector with 6 contacts, rated at 250V and 13A. Its insulator material is GLASS FILLED POLYAMIDE, suitable for applications requiring a temperature range of -55 to 125°C. With a compact body size of 1.218" x 0.716" x 0.891", it is ideal for cable mounting in various electronic systems.
Median Price
$2.520
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
TE Connectivity
1+ parts
$2.150
100+ parts
$1.760
1k+ parts
$1.120
10k+ parts
-
Mouser Electronics
$2.040
$1.700
$1.470
RS Americas
$2.790
$2.200
$1.950
DigiKey
$3.100
$2.235
$1.914
$1.771
RS (Exports)
$3.160
$2.580
Conrad
$4.181
TTI
$1.780
$1.650
Master Electronics
$1.710
$1.490
$1.290
Verical
$2.363
Vyrian
$1.670
VNN
$1.740
Nova Conductors
$1.775
Digiode
$2.042
DF Sales Co.
$3.150
IBS Electronics
$2.425
$2.298
$2.256
Q Components
LJR Electronics
Semicontronic
$1.030
$1.004
$0.999
Continental Prestige Electronics
$1.689
$1.655
Argo Parts USA
Netroflash
Advanced Electronics
$1.805
Corphita
$1.935
Modulus Dynamics
$1.970
$1.951
$1.892
Aztec Data Supply Inc.
$2.030
Allen Electronics Distributors
$2.850
$2.720
$2.630
Perfect Parts
The compact size of the body allows for easy installation in tight spaces.
Can handle high voltage applications, ensuring safety and reliability.
Provides excellent insulation properties and durability for long-term use.
Can operate in high temperature environments without compromising performance.
Meets strict safety standards for flame resistance, reducing fire hazards.
Capable of handling high current signals for efficient power transmission.
Offers multiple contact points for secure connections and better signal transmission.
Designed for easy installation on cables, facilitating quick setup.
Compatible with male connectors, ensuring proper mating for reliable connections.
Combination Line Connectors DT06-6S-CE02 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Total No. of Contacts:
UL Flammability Code:
DT06-6S-CE02 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DT0y- Housing chg 06/APR/2021 Multiple Devices Product Improvement 15/May/2019
PCN Assembly/Origin - Tooling Capacity 29/APR/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
Hy Electronic
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
Temic Semiconductors
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
STMicroelectronics
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
DT15-08PA
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
DTP06-4S-EE01
TE Connectivity's DTP06-4S-EE01 is a combination line connector with dimensions of 1.866" x 1" x 1.026". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications requiring a max current of 25A.
AT06-12SC
Amphenol
The Amphenol AT06-12SC is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-12PC connectors, featuring female contact gender and plug body style.
34797-0202
Molex
Molex 34797-0202 is a Combination Line Connector with 0.598" x 0.555" x 1.417" dimensions, made of POLYBUTYLENE TEREPHTHALATE. It has 2 contacts, male gender, blade pin-skt style, and is used for cable mounting with crimp termination.
12020827
Aptiv
Aptiv's 12020827 is a POLYAMIDE66 combination line connector with 3 contacts for cable mounting. It features male contact gender, crimp termination, and mates with 12020829. Ideal for automotive wiring harnesses due to its reliable connection and durability.
AT04-12PA-PM05
The Amphenol AT04-12PA-PM05 is a 2x12 Combination Line Connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and male contact gender. Ideal for cable and panel mounting applications requiring reliable signal connections in compact spaces.
34345-0001
Molex 34345-0001 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It features CRIMP termination, FEMALE/MALE contact gender, and PLUG body style. Ideal for cable mounting applications requiring UL 94-HB flammability rating.
AT04-2P
The Amphenol AT04-2P is a combination line connector with 2 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-2S connectors, using crimp termination for male contact pins.
12015799
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Mixed Contacts: NO; Filter Feature: NO;
DT06-12SB-CE13
TE Connectivity's DT06-12SB-CE13 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style with strain relief option.
DT06-12SB-EP06
TE Connectivity's DT06-12SB-EP06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style with strain relief option.
776087-1
TE Connectivity's 776087-1 is a Combination Line Connector with 0.157" Mating Contact Pitch, suitable for board mounting with Tin Termination Finish. It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 105°C, ideal for commercial applications requiring 8A signal current.
1719105-1
TE Connectivity's 1719105-1 is a Combination Line Connector with dimensions of 1.902" x 1.299" x 0.909". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 130 °C. With a total of 14 contacts, it is ideal for cable mounting applications at up to 30A signal current.
DT06-12SA-CE12
The TE Connectivity DT06-12SA-CE12 is a combination line connector with 12 contacts, rated for 250V and 13A. It features a body size of 1.701" x 0.82" x 1.597", suitable for applications requiring a max operating temperature of 125°C and min of -55°C. Ideal for cable mounting with UL certification and polarization key for secure connections.
AT04-2P-BLK
AT04-2P-BLK by Amphenol is a combination line connector with dimensions of 0.673" x 0.669" x 1.717". It has a max operating temperature of 125°C and a min operating temperature of -55°C. This male receptacle connector has 2 contacts, rated for a signal current of 13A, and is designed for cable mounting with crimp termination. Its insulator material is made of polyethylene.
1-967644-1
TE Connectivity 1-967644-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 2 contacts, rated at 7.5A for signal current. Ideal for cable mounting applications, operating b/w -40 to 120 °C temperature range.
DT04-3P-EP10
TE Connectivity's DT04-3P-EP10 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring crimp termination and UL flammability rating of 94V-0.
180923
TE Connectivity 180923 is a Combination Line Connector with POLYAMIDE insulator. It has 2 contacts, suitable for cable mounting with 0.9"x.453"x.902" dimensions. Operating from -40 to 105°C, it's a female receptacle connector for mains rated at 115/230VAC, mating with 180924.
350429-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; JESD-609 Code: e3; Empty Shell: NO;
1-1379674-1
TE Connectivity 1-1379674-1 is a Combination Line Connector with dimensions of 0.551" x 1.315" x 0.463". Rated for 14V, it has an operating temperature range of -40 to 100°C. Ideal for applications requiring a polarized male connector with a signal current rating of 7.5A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT06-3S-C015
TE Connectivity's DT06-3S-C015 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL94V-0 flammability code and crimp termination.
DT06-6S
TE Connectivity's DT06-6S is a 6-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications in commercial settings due to its durability, polarization key feature, and UL reference standard compliance.
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
DT06-3S
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Manufacturer Series: DT; Body or Shell Style: PLUG; MIL Conformity: NO;
TE Connectivity's DT06-3S is a 3-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications, this female connector features nickel termination finish and glass-filled polyamide insulator material.
DT06-2S-E008
TE Connectivity's DT06-2S-E008 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DT06-2S-C015
TE Connectivity's DT06-2S-C015 is a 1.118" x 0.591" x 0.621" combination line connector with 250V rated voltage and -55 to 125°C operating temperature range. Featuring glass-filled polyamide insulator, it has 13A signal current rating and UL flammability code of 94V-0. Ideal for cable mounting applications, this polarized connector offers crimp termination and female contact gender.
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-2S-CE05
TE Connectivity's DT06-2S-CE05 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 13A signal current capacity. Ideal for cable mounting applications requiring crimp termination.
DT06-2S
TE Connectivity's DT06-2S is a 1.118" combination line connector with insulation resistance of 1000000000 ohm, rated voltage of 250V, and operating temperature range from -55 to 125 °C. It features a glass-filled polyamide insulator and is ideal for commercial applications requiring a durable, polarized female connector with crimp termination.
DT06-12SA-CE06
TE Connectivity's DT06-12SA-CE06 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL certification.
DT06-2S-EP06
TE Connectivity's DT06-2S-EP06 is a 1.228" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, supports 13A signal current, and uses crimp termination for cable mounting applications.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-12SA-P012
TE Connectivity's DT06-12SA-P012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT06-4S-E008
TE Connectivity's DT06-4S-E008 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL flammability rating of 94V-0.
DT06-12SA-C015
TE Connectivity's DT06-12SA-C015 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief.
DT06-2S-P012
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
DT06-12SA
TE Connectivity's DT06-12SA is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL certification and polarization key for secure connections.
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved