Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT15-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE46 insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, suitable for panel mounting applications. The connector features a straight shell style with RND PIN-SKT contact gender, ideal for signal connections in various industries.
Median Price
$8.075
Lifecycle Status
Suppliers In-Stock
20
In-Stock Inventory
1k+
TTI
1+ parts
$7.750
100+ parts
$7.330
1k+ parts
$7.250
10k+ parts
-
Element14
$9.428
$7.207
$6.693
Newark
$13.080
$11.720
$11.280
DigiKey
$30.914
$29.096
TTI Europe
$5.799
$5.678
Verical
$7.225
$7.115
Chip1Stop
$8.180
$7.440
Farnell
$7.970
VNN
Digiode
$6.232
Nova Conductors
$8.978
Electro Sonic
$24.390
$11.350
$7.320
Bristol Electronics
IBS Electronics
$7.696
$7.592
Vyrian
TME
$7.170
$6.790
NAC Semi
$10.330
Extreme Components
LJR Electronics
EMSNET
Aztec Data Supply Inc.
$4.470
Semicontronic
$4.930
$4.807
$4.782
Corphita
$5.904
Advanced Electronics
$7.072
$6.718
Continental Prestige Electronics
$8.690
Perfect Parts
ErreBi Group
Argo Parts USA
Bastille Electronics
Benley Electronics
Abacus Technologies
The compact size of the body allows for easy installation in tight spaces.
This high rated voltage ensures safe and efficient operation of the connector.
The use of high-quality insulator material ensures durability and reliability of the connector.
The high maximum operating temperature allows for use in a wide range of environments.
The high rated current ensures that the connector can handle high-power signals.
The panel mounting type allows for easy and secure installation of the connector on various panels.
The solder termination type ensures a reliable and solid connection.
Combination Line Connectors DT15-12PA attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT15-12PA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices Product Improvement 11/Oct/2017
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
SMBJ18CA
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
FDLL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
Philips Components
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
World Products
KSZ9031RNXIC
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
DTM06-4S-E003
TE Connectivity
TE Connectivity's DTM06-4S-E003 is a 1.235" x 0.694" x 0.685" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 4 contacts, UL94V-0 flammability code, and 7.5A signal current, it is ideal for cable mounting applications requiring polarized housing and strain relief.
AT06-6S
Amphenol
The Amphenol AT06-6S is a female combination line connector with 6 contacts, rated for 13A signal current. With a compact body size of 0.98" x 0.717" x 1.237", it operates b/w -55°C to 125°C, making it ideal for cable mounting applications.
4-1437290-1
TE Connectivity's 4-1437290-1 is a Combination Line Connector with dimensions of 1.266" x 1.504" x 1.36". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 125°C. With 34 contacts, it is used in cable mounting applications at mains ratings of 115/230VAC.
776163-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; IEC Conformity: NO; Mounting Type: BOARD AND PANEL;
DT04-08PA-C015
TE Connectivity's DT04-08PA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
2-2141272-1
TE Connectivity's 2-2141272-1 is a 1.968" EMI shielded combination line connector with 850V voltage rating and -40 to 140°C operating temperature range. Ideal for applications requiring a 54A signal current, such as panel-mounted mains connectors with press-fit termination in male contact gender.
1-1703498-1
TE Connectivity 1-1703498-1 is a Combination Line Connector with dimensions of 0.583" x 1.732" x 0.589". It has a rated voltage of 14V and can operate b/w -40°C to 130°C. With UL certification, it features male SQ PIN-SKT contacts for signal currents up to 25A in cable mounting applications.
AT06-2S-KIT01
The Amphenol AT06-2S-KIT01 is a Combination Line Connector with dimensions of 0.713" x 0.591" x 1.181". It has an operating temperature range of -55 to 125°C and can handle a rated current of 13A. This female connector with round pin sockets is suitable for cable mounting applications.
AT04-12PA-SRGRY
The Amphenol AT04-12PA-SRGRY is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this male receptacle connector features round pin sockets and compact dimensions of 1.598" x 0.874" x 2.476".
ATP06-2S-EC01
The Amphenol ATP06-2S-EC01 is a Combination Line Connector with POLYETHYLENE insulator, operating from -55 to 125°C. It has 2 contacts, rated at 25A for signal transmission. Ideal for cable mounting applications requiring crimp termination and female contact gender.
12015798
Aptiv
Aptiv's 12015798 is a Combination Line Connector with POLYAMIDE6 insulator. It has 4 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 12015024.
1674312-1
The TE Connectivity 1674312-1 is a Combination Line Connector with dimensions of 0.827" x 1.819" x 0.622". It has a rated voltage of 12V and operates b/w -30°C to 105°C. With UL certification, it features 40 contacts in a polarized plug design for cable mounting applications.
DT04-3P-CE04
TE Connectivity's DT04-3P-CE04 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
12047663
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: 1.299 inch;
282108-1
TE Connectivity's 282108-1 is a Combination Line Connector with dimensions of 1.724" x 0.543" x 1.654". It has a rated voltage of 24V, insulator material GLASS FILLED POLYAMIDE, and operates b/w -40 to 125°C. With a rated current of 14A, it features polarized polarization key and is ideal for cable mounting applications.
1-1418362-1
TE Connectivity 1-1418362-1 is a COMBINATION LINE CONNECTOR with 62 contacts, rated at 36V and 40A. It has dimensions of 5.196" x 1.889" x 2.267", suitable for BOARD mounting applications in various industries due to its high operating temperature range (-40°C to +140°C) and UL certification.
30968-1127
Molex
Molex 30968-1127 is a Combination Line Connector with GLASS FILLED SYNDIOTACTIC POLYSTYRENE insulator. It has 12 contacts, rated at 7A for signal current. Ideal for cable mounting applications, operating b/w -40 to 100°C temperature range.
PL182X-301-70
The Amphenol PL182X-301-70 is a male plug combination line connector with 2 contacts, rated for 300A signal current. It has dimensions of 2.775" x 1.527" x 2.429" and operates in temperatures ranging from -40°C to 125°C. Ideal for cable mounting applications requiring high current signal connections.
DT04-12PC-C015
TE Connectivity's DT04-12PC-C015 is a combination line connector with a body length of 1.808", width of 1.597", and depth of 0.876". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, made with glass-filled polyamide insulator material, is commonly used for cable mounting applications requiring a polarized, crimped male contact receptacle with strain relief.
929505-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT15-6P-G003
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
DT15-6P
TE Connectivity's DT15-6P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for board mounting applications requiring a male contact gender and straight receptacle body style.
DT15-6P-GP01
TE Connectivity's DT15-6P-GP01 is a 2-row combination line connector with dimensions of 1.555" x 1.685". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring solder termination and UL certification.
DT15-08PA
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
DT15-12PA-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Rated Current - Signal: 13 A; Maximum Operating Temperature (Cel): 125;
DT15-08PA-G003
TE Connectivity's DT15-08PA-G003 is a 2-row combination line connector with dimensions of 1.545" x 2.17" x 1.19". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring a polarized design with solder termination.
DT15-12PA-G003
TE Connectivity's DT15-12PA-G003 is a combination line connector with a body length of 1.555 inches and a width of 2.331 inches. It has a rated voltage of 250V and can withstand temperatures ranging from -55 to 125 °C. This connector has 2 rows loaded and a total of 12 contacts. It is a male connector with a straight mounting style and solder termination type. The DT15-12PA-G003 is commonly used in general-purpose applications and has a UL flammability code of 94V-0.
DT15-12PA-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Filter Feature: NO; MIL Conformity: NO;
DT15-4P
The TE Connectivity DT15-4P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a male contact gender and straight shell style.
DT15-08PB
TE Connectivity's DT15-08PB is a 2-row combination line connector with 8 contacts, rated at 250V and 13A. With a body length of 1.545" and width of 2.17", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring a polarized male connector in plastic insulator material.
DT15-08PB-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Body Depth: 1.185 inch; Mixed Contacts: NO;
DT15-12PB
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Terminal Pitch (mm): 1.45; No. of Rows Loaded: 2;
DT15-12PB-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; Panel Mount: NO; Maximum Operating Temperature (Cel): 125;
DT15-12PB-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Reference Standard: UL; No. of Ports: 1;
DT15-12PB-G003
TE Connectivity's DT15-12PB-G003 is a 12-contact combination line connector with rated voltage of 250V and current of 13A. It operates b/w -55°C to 125°C, suitable for panel mounting applications. The connector features polarized design, UL flammability rating of 94V-0, and solder termination type.
DT15-4P-G003
DT15-4P-G003 by TE Connectivity is a combination line connector with a body length of 1.555 inch and width of 1.51 inch. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125 °C. This connector, with its male contact style and solder termination type, is commonly used in panel mounting applications requiring a max current of 13A.
DT15-12PD-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 13 A; Terminal Pitch (mm): 1.45; No. of Ports: 1;
DT15-12PC-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; EMI Shielded: NO; Mains Connector Rating: 13A; Rated Current - Signal: 13 A;
DT15-12PC
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Body Depth: 1.186 inch; Additional Features: POLARIZED;
DT15-12PD
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Polarization Key: POLARIZED; EMI Shielded: NO; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved