Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
Median Price
$6.100
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS (Exports)
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$7.880
$6.580
DigiKey
$9.110
$5.594
Newark
$17.170
$13.270
$11.320
RS Americas
$25.620
Future Electronics
$4.710
$4.530
TTI
$5.910
$5.490
Master Electronics
$4.910
$4.670
$4.640
Verical
$6.002
$5.709
Boersig
Digiode
$5.377
VNN
$5.660
Nova Conductors
$7.340
Electro Sonic
$9.330
$6.620
$5.970
IBS Electronics
$6.480
Bristol Electronics
NAC Semi
$8.100
$7.480
Vyrian
TME
Q Components
Bisco
Aztec Data Supply Inc.
$2.890
Semicontronic
$4.810
$4.690
$4.666
Corphita
$5.094
Continental Prestige Electronics
$5.863
$5.745
Netroflash
Advanced Electronics
$8.808
$8.367
ErreBi Group
Argo Parts USA
Abacus Technologies
The compact size of the body allows for easy integration into tight spaces or crowded circuit boards.
The high rated voltage ensures reliable and safe electrical connections.
The use of glass-filled polyamide46 as insulator material provides excellent durability and resistance to heat.
The high maximum operating temperature allows for use in a wide range of environments without performance issues.
Having a UL flammability code of 94V-0 indicates that the product meets strict safety standards for fire resistance.
The high rated current of 13 A ensures compatibility with a wide range of electrical devices and applications.
The board mounting type makes installation and maintenance of the connector convenient and hassle-free.
The solder termination type ensures secure and reliable connections for optimal performance.
Combination Line Connectors DT15-08PA attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT15-08PA Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Drawings Document Clarification 30/Oct/2019
PCN Assembly/Origin - DTyy - tooling capacity 05/APR/2021
PCN Packaging - Multiple Devices Packaging 15/May/2019
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transys Electronics
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
Weitron Technology
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SS14
Microsemi
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Micro Commercial Components
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Gec Plessey Semiconductors
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
DT04-2P-CE04
TE Connectivity
TE Connectivity's DT04-2P-CE04 is a 2.251" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
33471-0201
Molex
Molex 33471-0201 is a Combination Line Connector with 0.604" body length and 0.505" width. Made of GLASS FILLED POLYAMIDE, it has 2 contacts for FEMALE crimp termination. Ideal for cable mounting applications due to its RECEPTACLE design and UL 94-HB flammability rating.
AT04-2P-RD01
Amphenol
The Amphenol AT04-2P-RD01 is a male receptacle combination line connector with 2 contacts, rated for 13A signal current. It has a compact body size of 0.673" x 0.669" x 1.717" and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications requiring reliable signal transmission.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
1-776280-1
TE Connectivity 1-776280-1 is a Combination Line Connector with dimensions 1.606" x 1.498" x 1.263". It has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, rated at 17A for signal current, and operates b/w -40°C to 125°C. Ideal for board mounting applications requiring a polarized, right angle male connector with UL94V-0 flammability rating.
AT06-08SA
The Amphenol AT06-08SA is a 2-row combination line connector with 8 contacts, rated for 13A signal current. Its dimensions are 1.449" x 0.776" x 1.229", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic connections.
30700-1080
The Molex 30700-1080 is a Combination Line Connector with dimensions of 0.608" x 0.928" x 1.243". It features SYNDIOTACTIC POLYSTYRENE insulator material, rated for -40 to 100°C operating temperature range, and can handle up to 7A signal current. Ideal for board mounting applications requiring an 8-contact male SQ PIN-SKT connector.
54201415
Aptiv
Aptiv's 54201415 is a Combination Line Connector with dimensions of 1.311" x 1.006" x 1.378". It features POLYAMIDE insulator material, 3 loaded rows, and 14 male contacts. Ideal for automotive applications requiring reliable multi-contact connections in compact spaces.
DTP06-2S-EE01
TE Connectivity's DTP06-2S-EE01 is a 1.867" x 0.883" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It features polarized housing, UL flammability code 94V-0, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with strain relief.
AT04-12PA-BL08
The Amphenol AT04-12PA-BL08 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It has a body size of 2.181" x 1.402" x 1.992", made of POLYETHYLENE for -55 to 125°C applications in cable and panel mounting setups.
282106-1
TE Connectivity's 282106-1 is a Combination Line Connector with dimensions of 1.252" x 0.543" x 1.654". Rated for 24V, it has GLASS FILLED POLYAMIDE insulator and operates b/w -40°C to 125°C. With a rated current of 14A, it features a polarized design and is ideal for cable mounting applications.
DRC23-40PA-N012
TE Connectivity's DRC23-40PA-N012 is a 4-row combination line connector with dimensions of 1.785" x 3.8". Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications requiring a polarized, soldered male receptacle with UL certification (94V-0).
DTM04-4P-E003
TE Connectivity's DTM04-4P-E003, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 4 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with male contact gender and receptacle body style.
ATP04-2P
The Amphenol ATP04-2P is a combination line connector with polyethylene insulator, rated for 25A signal current. It has 2 contacts, operates b/w -55 to 125°C, and uses crimp termination on cables. Ideal for applications requiring reliable male receptacle connectors with round pin sockets.
AT06-6S-MM01
The Amphenol AT06-6S-MM01 is a 3-row combination line connector with 6 contacts, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has dimensions of 1.04" x 0.811" x 1.315".
ATM04-2P-P007
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
12092249
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO; Contact Material: NOT SPECIFIED;
DT06-2S-CE06
TE Connectivity's DT06-2S-CE06 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design, 13A signal current rating, and is ideal for cable mounting applications.
350809-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN/GOLD (30) OVER NICKEL; Additional Features: MATE-N-LOK; MIL Conformity: NO;
SMS36SE3K9
Souriau
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT15-6P-G003
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
DT15-6P
TE Connectivity's DT15-6P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for board mounting applications requiring a male contact gender and straight receptacle body style.
DT15-6P-GP01
TE Connectivity's DT15-6P-GP01 is a 2-row combination line connector with dimensions of 1.555" x 1.685". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring solder termination and UL certification.
DT15-12PA-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Rated Current - Signal: 13 A; Maximum Operating Temperature (Cel): 125;
DT15-08PA-G003
TE Connectivity's DT15-08PA-G003 is a 2-row combination line connector with dimensions of 1.545" x 2.17" x 1.19". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring a polarized design with solder termination.
DT15-12PA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE46; Body or Shell Style: RECEPTACLE; MIL Conformity: NO;
DT15-12PA-G003
TE Connectivity's DT15-12PA-G003 is a combination line connector with a body length of 1.555 inches and a width of 2.331 inches. It has a rated voltage of 250V and can withstand temperatures ranging from -55 to 125 °C. This connector has 2 rows loaded and a total of 12 contacts. It is a male connector with a straight mounting style and solder termination type. The DT15-12PA-G003 is commonly used in general-purpose applications and has a UL flammability code of 94V-0.
DT15-12PA-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Filter Feature: NO; MIL Conformity: NO;
DT15-4P
The TE Connectivity DT15-4P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a male contact gender and straight shell style.
DT15-08PB
TE Connectivity's DT15-08PB is a 2-row combination line connector with 8 contacts, rated at 250V and 13A. With a body length of 1.545" and width of 2.17", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring a polarized male connector in plastic insulator material.
DT15-08PB-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Body Depth: 1.185 inch; Mixed Contacts: NO;
DT15-12PB
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Terminal Pitch (mm): 1.45; No. of Rows Loaded: 2;
DT15-12PB-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; Panel Mount: NO; Maximum Operating Temperature (Cel): 125;
DT15-12PB-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Reference Standard: UL; No. of Ports: 1;
DT15-12PB-G003
TE Connectivity's DT15-12PB-G003 is a 12-contact combination line connector with rated voltage of 250V and current of 13A. It operates b/w -55°C to 125°C, suitable for panel mounting applications. The connector features polarized design, UL flammability rating of 94V-0, and solder termination type.
DT15-4P-G003
DT15-4P-G003 by TE Connectivity is a combination line connector with a body length of 1.555 inch and width of 1.51 inch. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125 °C. This connector, with its male contact style and solder termination type, is commonly used in panel mounting applications requiring a max current of 13A.
DT15-12PD-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Rated Current - Signal: 13 A; Mains Connector Rating: 13A;
DT15-2P-P010
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; EMI Shielded: NO; Mounting Type: PANEL;
DT15-08PD
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 8; Empty Shell: YES; MIL Conformity: NO;
DT15-08PC
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; UL Flammability Code: 94V-0; Rated Voltage: 250 V; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved