Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT15-12PA-G003 is a combination line connector with a body length of 1.555 inches and a width of 2.331 inches. It has a rated voltage of 250V and can withstand temperatures ranging from -55 to 125 °C. This connector has 2 rows loaded and a total of 12 contacts. It is a male connector with a straight mounting style and solder termination type. The DT15-12PA-G003 is commonly used in general-purpose applications and has a UL flammability code of 94V-0.
Median Price
$24.729
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Master Electronics
1+ parts
$24.970
100+ parts
$21.130
1k+ parts
$20.970
10k+ parts
-
Verical
TTI
$21.710
$21.490
VNN
$26.119
Digiode
$26.486
Electro Sonic
$29.600
$21.960
$20.450
IBS Electronics
$39.971
$27.755
$27.068
Bristol Electronics
Vyrian
Nova Conductors
Advanced Electronics
$4.516
$4.290
Aztec Data Supply Inc.
$8.830
Corphita
$25.092
Semicontronic
$48.320
$47.112
$46.870
Authorized Procurement Solutions
Continental Prestige Electronics
ErreBi Group
Argo Parts USA
Bastille Electronics
Compact size makes it suitable for tight spaces and efficient use of available space on the panel.
High voltage rating ensures compatibility with a wide range of applications and provides reliable electrical connections.
Allows for multiple connections, increasing versatility and flexibility in wiring configurations.
Capable of operating at high temperatures without compromising performance, making it suitable for various industrial environments.
Meets safety standards for flame resistance, ensuring safe use in applications where fire safety is a concern.
High current rating allows for reliable transmission of signals and power without risk of overheating or damage.
Provides ample connections for multiple wiring needs, accommodating a variety of signal and power requirements.
Solder termination ensures secure and durable connections, reducing the risk of signal loss or disconnection.
Combination Line Connectors DT15-12PA-G003 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Body Width:
Body Length:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT15-12PA-G003 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Product Change Notification 2024-11-18 (PDF)
TE Connectivity / DEUTSCH DT Series (PDF)
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
RC0805FR-0710KL
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
Fagor Electronica S Coop
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DTM06-6S-E005
TE Connectivity
TE Connectivity's DTM06-6S-E005 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a rated current of 7.5A and operates b/w -55 to 125°C. Ideal for cable mounting applications, it features a female contact style with crimp termination and polarization key for secure connections.
DT13-08PB
The TE Connectivity DT13-08PB is a combination line connector with 8 contacts, rated voltage of 250V, and rated current of 13A. It has a body size of 1.545" x 2.17" x 1.39", operates in temperatures from -55°C to 125°C, and features a polarized design for secure connections. Ideal for board mounting applications requiring reliable signal transmission at high currents up to 13A.
AT06-12SA-SRGRY
Amphenol
The Amphenol AT06-12SA-SRGRY is a 12-contact combination line connector with 2 rows, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has dimensions of 1.772" x 0.827" x 1.713".
HVSL800062A135
Amphenol's HVSL800062A135 is a 3.185" x 1.953" x 3.169" combination line connector with polyethylene insulator, rated for -40 to 125°C. It has UL94V-0 flammability code, supports 180A signal current, and features crimp termination for male contacts. Ideal for cable mounting applications per EN and UL standards.
DTP06-2S
TE Connectivity's DTP06-2S is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 25A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DT06-12SA-B016
TE Connectivity's DT06-12SA-B016 is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C, making it ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
776534-1
TE Connectivity's 776534-1 is a Combination Line Connector with dimensions of 0.772" x 1.872" x 0.745". It has a rated voltage of 250V, UL Flammability Code of 94-HB, and can handle up to 13A current. This connector is ideal for applications requiring male contacts, polarized keying, and operating temperatures from -40°C to 125°C.
DT04-2P-RT02
TE Connectivity's DT04-2P-RT02 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C. It has UL94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring crimp termination with strain relief.
282088-1
TE Connectivity's 282088-1 is a Combination Line Connector with dimensions of 1.146" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator, and operates b/w -40°C to 125°C. Ideal for applications requiring a polarized housing, it offers a rated current of 14A and features a total of 4 contacts for cable mounting.
12047931
Aptiv
Aptiv's 12047931 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, male gender, and crimp termination. Designed for cable mounting, it mates with 12047937 for various automotive applications.
DTM04-12PA-L012
TE Connectivity's DTM04-12PA-L012, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 12 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a male contact gender and panel mounting with strain relief option.
PL182X-301-70
The Amphenol PL182X-301-70 is a male plug combination line connector with 2 contacts, rated for 300A signal current. It has dimensions of 2.775" x 1.527" x 2.429" and operates in temperatures ranging from -40°C to 125°C. Ideal for cable mounting applications requiring high current signal connections.
33472-1201
Molex
The Molex 33472-1201 is a Combination Line Connector with 12 contacts, rated at 22A. It features a mating contact pitch of 0.138", GLASS FILLED NYLON insulator material, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections in polarized housings with crimp terminations.
DT15-6P-GP01
TE Connectivity's DT15-6P-GP01 is a 2-row combination line connector with dimensions of 1.555" x 1.685". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring solder termination and UL certification.
174463-1
TE Connectivity's 174463-1 is a Combination Line Connector with dimensions of 0.409" x 0.828" x 0.394". Rated for 12V, it has an operating temperature range of -30 to 105°C. This female connector with 2 contacts and POLYBUTYLENE TEREPHTHALATE insulator is ideal for cable mounting applications.
AT06-08SA-EC01
The Amphenol AT06-08SA-EC01 is a 2-row combination line connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and total of 4 contacts. Ideal for cable mounting applications requiring female contact gender and plug body style.
9-966140-2
TE Connectivity's 9-966140-2 is a Combination Line Connector with 15 contacts, rated at 24V. With a body length of 1.614" and width of 0.791", it operates b/w -40 to 100°C. Ideal for panel mounting applications, this connector features right angle mounting style and solder termination.
12065425
The Aptiv 12065425 is a Combination Line Connector with dimensions of 1.661" x 1.118" x 1.024". It features POLYAMIDE66 insulator material, 10 contacts, and female contact gender. This connector is used for cable mounting applications requiring crimp termination.
AT04-4P
The Amphenol AT04-4P is a combination line connector with 4 contacts, rated at 13A. It has a body size of 0.827" x 0.772" x 1.811", made of polyethylene, suitable for cable mounting applications. Operating temperature ranges from -55°C to 125°C, ideal for various electronic systems requiring reliable female contact connections.
776538-1
TE Connectivity's 776538-1 is a Combination Line Connector with dimensions of 1.126" x 1.872" x 1.049". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 125°C. With UL certification, it features 8 contacts, polarized keying, and male RND PIN-SKT contact style for cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT15-6P-G003
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
DT15-6P
TE Connectivity's DT15-6P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for board mounting applications requiring a male contact gender and straight receptacle body style.
DT15-08PA
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
DT15-12PA-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Rated Current - Signal: 13 A; Maximum Operating Temperature (Cel): 125;
DT15-08PA-G003
TE Connectivity's DT15-08PA-G003 is a 2-row combination line connector with dimensions of 1.545" x 2.17" x 1.19". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, featuring a polarized design with solder termination.
DT15-12PA
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE46; Body or Shell Style: RECEPTACLE; MIL Conformity: NO;
DT15-12PA-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Filter Feature: NO; MIL Conformity: NO;
DT15-4P
The TE Connectivity DT15-4P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator material. It has a rated voltage of 250V, rated current of 13A, and operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a male contact gender and straight shell style.
DT15-08PB
TE Connectivity's DT15-08PB is a 2-row combination line connector with 8 contacts, rated at 250V and 13A. With a body length of 1.545" and width of 2.17", it operates b/w -55°C to 125°C, making it suitable for board mounting applications requiring a polarized male connector in plastic insulator material.
DT15-08PB-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Body Depth: 1.185 inch; Mixed Contacts: NO;
DT15-12PB
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Reference Standard: UL; Terminal Pitch (mm): 1.45; No. of Rows Loaded: 2;
DT15-12PB-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: PANEL; Panel Mount: NO; Maximum Operating Temperature (Cel): 125;
DT15-12PB-B028
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Reference Standard: UL; No. of Ports: 1;
DT15-12PB-G003
TE Connectivity's DT15-12PB-G003 is a 12-contact combination line connector with rated voltage of 250V and current of 13A. It operates b/w -55°C to 125°C, suitable for panel mounting applications. The connector features polarized design, UL flammability rating of 94V-0, and solder termination type.
DT15-4P-G003
DT15-4P-G003 by TE Connectivity is a combination line connector with a body length of 1.555 inch and width of 1.51 inch. It has a rated voltage of 250V and can operate in temperatures ranging from -55 to 125 °C. This connector, with its male contact style and solder termination type, is commonly used in panel mounting applications requiring a max current of 13A.
DT15-12PC-B016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Reference Standard: UL; Maximum Operating Temperature (Cel): 125;
DT15-12PD-G003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 13 A; Terminal Pitch (mm): 1.45; No. of Ports: 1;
DT15-12PC
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Body Depth: 1.186 inch; Additional Features: POLARIZED;
DT15-12PD
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Polarization Key: POLARIZED; EMI Shielded: NO; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved