Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 33472-1201 is a Combination Line Connector with 12 contacts, rated at 22A. It features a mating contact pitch of 0.138", GLASS FILLED NYLON insulator material, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections in polarized housings with crimp terminations.
Median Price
$2.338
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$1.376
100+ parts
-
1k+ parts
$1.121
10k+ parts
$1.090
Heilind Electronics
$1.480
$1.189
$1.171
Mouser Electronics
$2.190
$1.880
$1.460
$1.350
Adafruit Industries
$2.221
Chip1Stop
$2.350
$0.850
$0.810
$0.787
Waytek Inc.
$2.608
$1.968
$1.868
RS (Exports)
$2.680
$2.280
$2.120
Element14
$2.976
$2.850
$2.544
Newark
$3.010
$2.480
$2.160
RS Americas
$3.090
$2.380
DigiKey
$3.770
$2.641
Distrelec
$4.185
$3.084
TTI
$1.230
$1.180
TTI Europe
$1.624
$1.537
$1.504
Verical
$1.390
Master Electronics
$2.220
$1.770
$1.380
PEI Genesis
Powell Electronics
$1.550
$1.470
$1.440
Digiode
$1.162
Nova Conductors
$2.119
TestEquity
TME
$2.470
$2.090
Component Electronics Inc.
$3.080
$2.310
$2.000
Vyrian
VNN
NAC Semi
$2.820
$2.600
Q Components
IBS Electronics
$1.725
$1.641
$1.374
Bristol Electronics
Masline Electronics Inc.
Cyclops Electronics Ltd
ACDS - Activité Composants Distribution Service
Quittner & Schimek s.r.o.
Corphita
$1.101
Semicontronic
$1.370
$1.336
$1.329
Argo Parts USA
Bastille Electronics
$2.013
$1.912
$1.886
Modulus Dynamics
$2.270
Advanced Electronics
Continental Prestige Electronics
$3.050
$1.970
$1.850
Allen Electronics Distributors
$3.730
$2.760
Andel Nordic
$5.037
$4.835
Aztec Data Supply Inc.
$7.850
Perfect Parts
Assy Fe
EMSNET (Excess)
Kepictronics
Authorized Procurement Solutions
GreenTree Electronics
Glotronic Ltd.
S.R.D Solutions
Abacus Technologies
Eastek
Robosynatics
$2.225
$2.179
Lucentia Tech
0.138 inch - Allows for precise and secure connections, ensuring optimal performance.
1.285 inch - Provides ample space for contacts, reducing the risk of interference.
0.976 inch - Compact design for efficient use of space in installations.
1.455 inch - Offers enough depth for secure contact connections.
GLASS FILLED NYLON - Provides excellent insulation properties for safe and reliable operation.
2 - Allows for multiple connections in a single connector, increasing versatility.
125 °C - Ensures the connector can withstand high temperatures without compromising performance.
PREASSEM CONN - Simplifies installation and maintenance processes.
40 °C - Suitable for use in a wide range of environments.
COMBINATION LINE CONNECTOR - Versatile connector type for various applications.
POLARIZED HOUSING - Prevents incorrect connections for added safety.
22 A - Capable of handling high current signals without overheating.
BLACK - Provides a sleek and professional appearance.
UL - Meets industry standards for quality and safety assurance.
12 - Offers ample connection points for various devices.
CABLE - Easy and secure mounting to cables for stable connections.
GLASS FILLED NYLON/SYNDIOTACTIC POLYSTYRENE - Durable materials for long-lasting performance.
CRIMP - Secure termination method for reliable connections.
FEMALE - Compatible with male connectors for versatile usage.
RECEPTACLE - Designed for easy insertion and removal of contacts.
RND PIN-SKT - Ensures compatibility with various types of contacts.
LOCKING - Secures the connector in place for stable connections.
RECTANGULAR - Provides a standardized pattern for easy identification and compatibility.
COMMERCIAL - Reliable performance in commercial applications.
Combination Line Connectors 33472-1201 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
33472-1201 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Addl Tooling 20/Dec/2016
PCN Assembly/Origin - Mult Devs Equip Transfer 09/Nov/2022
PCN Packaging - Multiple Devices Packaging/Quantity 16/Nov/2020
PCN Other - Multiple Series Process Change 24/Mar/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
1N4148WT-7
Diodes Incorporated
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203F
Idec
ROTARY SWITCH;
Plessey Semiconductors Discrete Components Div
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ABS10-32.768KHZ-T
Abracon
Abracon's ABS10-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and wearables due to its compact size and low power consumption.
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Weitron Technology
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1-1418448-1
TE Connectivity
TE Connectivity 1-1418448-1 is a Combination Line Connector with dimensions of 1.417"x.728"x1.211". Rated for 60V, it operates b/w -40°C to 140°C. Ideal for cable mounting applications, it has a signal current rating of 20A and UL Flammability Code of 94V-0.
12162193
Aptiv
Aptiv's 12162193 is a COMBINATION LINE CONNECTOR with Body Length of 0.629" and Body Depth of 1.067". Made of POLYBUTYLENE TEREPHTHALATE, it has 2 FEMALE contacts for CABLE mounting. Ideal for automotive applications requiring reliable electrical connections.
33481-0201
Molex
Molex 33481-0201 is a Combination Line Connector with 0.673" body width and 2.161" depth, made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE. It has 2 contacts, male BLADE PIN-SKT style, crimp termination, and cable mounting. Ideal for applications requiring reliable electrical connections in limited space environments.
350809-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: TIN/GOLD (30) OVER NICKEL; Additional Features: MATE-N-LOK; MIL Conformity: NO;
174352-2
TE Connectivity's 174352-2 is a Combination Line Connector with dimensions of 1.087" x 0.811" x 0.898". Rated for 12V, it operates b/w -30°C to 105°C. With UL certification, it features a polarized housing and is ideal for cable mounting applications.
ATM06-2S-SR01BK
Amphenol
Amphenol's ATM06-2S-SR01BK is a female combination line connector with 2 contacts, rated at 7.5A signal current. Made of polyethylene, it operates b/w -55°C to 125°C and has a compact body size of 0.638" x 0.567" x 1.469". Ideal for cable mounting applications in various industries.
DTP04-4P-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: POALRIZED; Rated Current - Signal: 7.5 A; Body Length: 1.063 inch;
AT06-12SC-OMGRN
The Amphenol AT06-12SC-OMGRN is a Combination Line Connector with 12 contacts, rated at 13A. It features GLASS FILLED POLYAMIDE66 insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug connector with round socket contact style.
DT06-12SA-E008
TE Connectivity's DT06-12SA-E008 is a 2-row combination line connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
106462-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; DIN Conformance: NO; Total No. of Contacts: 2;
ATP06-4S-RD01BK
The Amphenol ATP06-4S-RD01BK is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female contact gender and plug body style with round pin-socket contact design.
DT06-2S-CE01
The TE Connectivity DT06-2S-CE01 is a Combination Line Connector with dimensions of 1.228" x 0.591" x 0.621". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a polarized, female contact style connector with crimp termination.
12162102
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYBUTYLENE TEREPHTHALATE; No. of Rows Loaded: 1; Total No. of Contacts: 4;
DTP04-2P-E003
TE Connectivity DTP04-2P-E003 is a 1.931x.872x.848" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 25A signal current. Ideal for cable mounting applications requiring male contact gender and receptacle body style with strain relief option.
DT06-08SA-C015
TE Connectivity's DT06-08SA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief.
282088-1
TE Connectivity's 282088-1 is a Combination Line Connector with dimensions of 1.146" x 0.366" x 1.268". It has a rated voltage of 24V, GLASS FILLED POLYAMIDE insulator, and operates b/w -40°C to 125°C. Ideal for applications requiring a polarized housing, it offers a rated current of 14A and features a total of 4 contacts for cable mounting.
33482-2101
The Molex 33482-2101 is a Combination Line Connector with dimensions of 1.718" x 0.875" x 2.144". It has 20 contacts, male gender, and blade pin-skt style for crimp termination. Ideal for cable mounting applications requiring a two-row loaded connector with glass-filled polyamide/syndiotactic polystyrene insulator material.
DTM04-4P-E003
TE Connectivity's DTM04-4P-E003, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 4 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with male contact gender and receptacle body style.
DTP06-4S-C015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: 1.374 inch; Body Length: 1.063 inch; Rated Current - Signal: 7.5 A;
1719105-1
TE Connectivity's 1719105-1 is a Combination Line Connector with dimensions of 1.902" x 1.299" x 0.909". Rated for 12V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 130 °C. With a total of 14 contacts, it is ideal for cable mounting applications at up to 30A signal current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33472-1206
Molex 33472-1206 is a Combination Line Connector with 0.138" pitch, suitable for commercial applications. Featuring 12 contacts, rated at 22A signal current, it has a temperature range of -40 to 125°C. The connector is designed with polarized housing and crimp termination for secure cable mounting.
33472-0601
Molex 33472-0601 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED POLYAMIDE Insulator, and 22A Rated Current. It is used for commercial applications, featuring a polarized housing and crimp termination for secure cable mounting.
33472-2001
Molex 33472-2001 is a 20-contact combination line connector with 2 loaded rows. It features female contacts, cable mounting, and crimp termination. Ideal for applications requiring receptacle connectors in various industries.
33472-0801
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: 1.009 inch; Additional Features: ROHS COMPLIANT;
33472-1601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Polarization Key: POLARIZED HOUSING;
33472-0606
Molex 33472-0606 is a Combination Line Connector with 0.138" pitch, 22A signal current, and -40 to 125°C operating range. It has a polarized housing for commercial applications in cable mounting with crimp termination.
33471-0401
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Contact Style: RND PIN-SKT; Termination Contact Finish: NOT APPLICABLE;
33472-4801
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Rows Loaded: 2; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE;
33472-4001
Molex 33472-4001 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 2 rows, 4 contacts, and operates b/w -40°C to 125°C. Ideal for cable mounting applications requiring female crimp termination in receptacle style connectors.
33471-0201
Molex 33471-0201 is a Combination Line Connector with 0.604" body length and 0.505" width. Made of GLASS FILLED POLYAMIDE, it has 2 contacts for FEMALE crimp termination. Ideal for cable mounting applications due to its RECEPTACLE design and UL 94-HB flammability rating.
33472-4806
Molex 33472-4806 is a Combination Line Connector with 8 contacts in 2 rows. Made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE, it operates b/w -40°C to 125°C. Ideal for cable mounting, crimp termination, and female contact applications.
33472-2006
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Total No. of Contacts: 20; Termination Contact Finish: NOT APPLICABLE;
33471-0206
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .78 inch; Termination Contact Finish: NOT APPLICABLE; Body or Shell Style: RECEPTACLE;
33471-0406
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: ROHS COMPLIANT; Reference Standard: UL; Contact Material: NOT SPECIFIED;
33471-0208
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 2; Body Length: .78 inch;
33472-4006
33472-4006 by Molex is a combination line connector with glass-filled polyamide/syndiotactic polystyrene insulator. It has 2 rows loaded and can operate in temperatures ranging from -40°C to 125°C. This cable-mounted connector has a total of 4 contacts and uses crimp termination, making it suitable for various applications requiring reliable female receptacle connectors.
33472-1606
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Design: PREASSEM CONN; Contact Material: NOT SPECIFIED;
33472-4882
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Filter Feature: NO; Mounting Type: CABLE;
33472-1254
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Body Length: 1.285 inch; Mating Contact Finish: NOT SPECIFIED;
33472-1251
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Insulator Color: BLACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved