Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 33472-0606 is a Combination Line Connector with 0.138" pitch, 22A signal current, and -40 to 125°C operating range. It has a polarized housing for commercial applications in cable mounting with crimp termination.
Median Price
$1.750
Lifecycle Status
Suppliers In-Stock
30
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$1.562
100+ parts
-
1k+ parts
$1.272
10k+ parts
$1.236
Heilind Electronics
$1.570
$1.260
$1.242
Verical
$1.660
$1.620
Misumi USA
$2.040
Chip1Stop
$2.240
$1.530
$1.470
$1.310
Mouser Electronics
$2.270
$1.940
$1.710
$1.580
Element14
$2.278
$2.189
$1.958
RS (Exports)
$2.380
Newark
$2.580
$1.970
$1.630
$1.480
RS Americas
$2.820
$2.230
Distrelec
$2.946
$2.261
Power & Signal
TTI
$0.920
$0.780
$0.760
TTI Europe
$0.826
$0.783
PEI Genesis
NEP Electronics
Farnell
$1.717
Master Electronics
$1.550
$1.300
DigiKey
$1.700
$1.600
Powell Electronics
$1.640
$1.520
Digiode
$0.863
Nova Conductors
$1.590
TestEquity
$1.690
TME
$2.520
$1.980
$1.330
NAC Semi
$1.450
Vyrian
Right Parts Inc.
IBS Electronics
$1.974
$1.875
$1.551
VNN
Q Components
Semicontronic
$0.700
$0.682
$0.679
Corphita
$0.817
Argo Parts USA
$1.542
Advanced Electronics
$1.581
Netroflash
$1.511
$1.479
Andel Nordic
$1.652
$1.586
Continental Prestige Electronics
$2.180
$1.230
Allen Electronics Distributors
$2.440
$1.810
Aztec Data Supply Inc.
$5.119
Neutron USA
$36.440
Perfect Parts
Assy Fe
EMSNET (Excess)
GreenTree Electronics
Abacus Technologies
Futuretech Components
Robosynatics
$1.490
$1.459
Lucentia Tech
Resion (Excess)
Eastek
The close proximity of contacts allows for efficient and reliable signal transmission.
Compact size of the connector makes it suitable for applications where space is limited.
The wide body design provides stability and durability to the connector.
Sufficient depth ensures secure fitting and connection of the components.
Glass filled polyamide offers high strength and heat resistance, making the connector suitable for various environments.
Dual rows loaded with contacts increase the connectivity options and efficiency of the connector.
With a high maximum temperature rating, the connector can withstand demanding operating conditions.
Preassembled contacts ensure consistent and reliable electrical connections.
The low minimum temperature rating allows for use in a wide range of environments.
The versatility of a combination line connector allows for multiple types of connections in a single unit.
Polarized housing ensures correct alignment and connection of mating components.
High signal current rating makes the connector suitable for applications requiring high power transmission.
Black color insulator provides a professional and sleek appearance to the connector.
Compliance with UL standards ensures safety and reliability of the connector.
Sufficient number of contacts allows for multiple connections to be made simultaneously.
Cable mounting type provides flexibility in installation and connectivity options.
Crimp termination ensures secure and reliable connection of wires to the connector.
Female contacts are typically used for receiving and accepting signals, ensuring compatibility with a wide range of devices.
Plug style allows for easy insertion and removal of the connector, making maintenance and assembly convenient.
Round pin and socket contact style offers a reliable and secure connection for signal transmission.
Locking mounting option provides additional security and stability to the connector once installed.
Rectangular contact pattern allows for efficient use of space and easy arrangement of contacts.
Commercial grade reliability ensures consistent performance and durability of the connector in various applications.
Combination Line Connectors 33472-0606 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
Filter Feature:
Insulator Color:
Insulator Material:
Mating Contact Pitch (inch):
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
33472-0606 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Multiple Devices 08/Jul/2015 Addl Tooling 20/Dec/2016
PCN Assembly/Origin - Mult Devs Equip Transfer 09/Nov/2022
PCN Packaging - Multiple Devices Packaging/Quantity 16/Nov/2020
PCN Other - Various Series Tooling 27/Aug/2014
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductor Technology
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS303C
Nexperia
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
LM317LMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
M39029/58-360
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
AT06-4S-MM01BLU
Amphenol
The Amphenol AT06-4S-MM01BLU is a combination line connector with 4 contacts, rated for 13A signal current. With a temperature range of -55 to 125°C, it features female contact gender and plug body style. Ideal for cable mounting applications requiring reliable connectivity in compact spaces.
ATM06-2S
The Amphenol ATM06-2S is a combination line connector with dimensions of 0.472" x 0.638" x 1.091". It has an operating temperature range of -55°C to 125°C and can handle a rated current of 7.5A, making it suitable for cable mounting applications requiring a female plug connector with round pin/socket contacts.
SMS36SE4K9
Esterline Technologies
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; IEC Conformity: NO; MIL Conformity: NO;
ATP04-4P-PM01
The Amphenol ATP04-4P-PM01 is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signal current, and operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring female contact gender and round pin/socket style connections.
DT06-08SA-C015
TE Connectivity
TE Connectivity's DT06-08SA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief.
AT04-12PA-SRGRY
The Amphenol AT04-12PA-SRGRY is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this male receptacle connector features round pin sockets and compact dimensions of 1.598" x 0.874" x 2.476".
DT04-4P-CE03
TE Connectivity's DT04-4P-CE03 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and min of -55°C. Ideal for applications requiring a polarized, crimped male connector with strain relief mounting on cables.
AT06-4S-MM01BLK
Amphenol's AT06-4S-MM01BLK is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated for 13A signal current, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and plug body style.
DT04-3P-EP10
TE Connectivity's DT04-3P-EP10 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring crimp termination and UL flammability rating of 94V-0.
33472-4801
Molex
Molex 33472-4801 is a Combination Line Connector with 8 contacts in 2 rows. Made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE, it operates b/w -40°C to 125°C. Ideal for cable mounting, this female connector uses crimp termination and is commonly used in various electronic applications.
54200206
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 2; MIL Conformity: NO; DIN Conformance: NO;
AT04-12PA-BL05
The Amphenol AT04-12PA-BL05 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable and panel mounting applications requiring a male receptacle with round pin/socket contact style.
12010975
Aptiv
Aptiv's 12010975 is a Combination Line Connector with dimensions of 2.173" x 0.685" x 1.87". It features POLYAMIDE insulator material, 6 contacts, and FEMALE contact gender. Ideal for cable mounting applications requiring CRIMP termination with RND PIN-SKT contact style.
776531-1
TE Connectivity's 776531-1 is a Combination Line Connector with dimensions of 0.997" x 1.441" x 1.22". Rated for 250V and 13A, it operates b/w -40 to 125°C. With UL certification, this connector has 6 contacts and is ideal for cable mounting applications.
DT06-6S
TE Connectivity's DT06-6S is a 6-contact combination line connector with insulation resistance of 1GΩ, rated voltage of 250V, and operating temperature range from -55 to 125°C. Ideal for cable mounting applications in commercial settings due to its durability, polarization key feature, and UL reference standard compliance.
34822-0013
34822-0013 by Molex is a 4-row combination line connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 66 contacts, rated at 25A for signal current, and operates b/w -40 to 125°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts in a receptacle shell style.
737021
TE Connectivity 737021 is a Combination Line Connector with POLYAMIDE insulator. It has 4 contacts, male gender, and operates b/w -40 to 105°C. Suitable for applications requiring a cable-mounted connector with a terminal pitch of 10.79mm at mains ratings of 115/230VAC.
2-794617-2
TE Connectivity's 2-794617-2 is a Combination Line Connector with 22 contacts, rated for 250V and 5A. Featuring POLYAMIDE66 insulation material, it operates b/w -40 to 105°C. Ideal for commercial applications requiring reliable crimp termination in cable mounting setups.
DTM06-2S-P006
DTM06-2S-P006 by TE Connectivity is a combination line connector with dimensions of 1.145" x 0.569" x 0.508". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 7.5A.
12015798
Aptiv's 12015798 is a Combination Line Connector with POLYAMIDE6 insulator. It has 4 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 12015024.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33472-1201
The Molex 33472-1201 is a Combination Line Connector with 12 contacts, rated at 22A. It features a mating contact pitch of 0.138", GLASS FILLED NYLON insulator material, and operates b/w -40 to 125°C. Ideal for commercial applications requiring reliable signal connections in polarized housings with crimp terminations.
33472-1206
Molex 33472-1206 is a Combination Line Connector with 0.138" pitch, suitable for commercial applications. Featuring 12 contacts, rated at 22A signal current, it has a temperature range of -40 to 125°C. The connector is designed with polarized housing and crimp termination for secure cable mounting.
33472-0601
Molex 33472-0601 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED POLYAMIDE Insulator, and 22A Rated Current. It is used for commercial applications, featuring a polarized housing and crimp termination for secure cable mounting.
33472-2001
Molex 33472-2001 is a 20-contact combination line connector with 2 loaded rows. It features female contacts, cable mounting, and crimp termination. Ideal for applications requiring receptacle connectors in various industries.
33472-0801
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body Length: 1.009 inch; Additional Features: ROHS COMPLIANT;
33472-1601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Pattern: RECTANGULAR; Polarization Key: POLARIZED HOUSING;
33471-0401
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Rows Loaded: 1; Contact Style: RND PIN-SKT; Termination Contact Finish: NOT APPLICABLE;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; No. of Rows Loaded: 2; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE;
33472-4001
Molex 33472-4001 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 2 rows, 4 contacts, and operates b/w -40°C to 125°C. Ideal for cable mounting applications requiring female crimp termination in receptacle style connectors.
33471-0201
Molex 33471-0201 is a Combination Line Connector with 0.604" body length and 0.505" width. Made of GLASS FILLED POLYAMIDE, it has 2 contacts for FEMALE crimp termination. Ideal for cable mounting applications due to its RECEPTACLE design and UL 94-HB flammability rating.
33472-4806
Molex 33472-4806 is a Combination Line Connector with 8 contacts in 2 rows. Made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE, it operates b/w -40°C to 125°C. Ideal for cable mounting, crimp termination, and female contact applications.
33472-2006
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Total No. of Contacts: 20; Termination Contact Finish: NOT APPLICABLE;
33471-0206
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: .78 inch; Termination Contact Finish: NOT APPLICABLE; Body or Shell Style: RECEPTACLE;
33471-0406
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Additional Features: ROHS COMPLIANT; Reference Standard: UL; Contact Material: NOT SPECIFIED;
33471-0208
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 2; Body Length: .78 inch;
33472-4006
33472-4006 by Molex is a combination line connector with glass-filled polyamide/syndiotactic polystyrene insulator. It has 2 rows loaded and can operate in temperatures ranging from -40°C to 125°C. This cable-mounted connector has a total of 4 contacts and uses crimp termination, making it suitable for various applications requiring reliable female receptacle connectors.
33472-1606
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Design: PREASSEM CONN; Contact Material: NOT SPECIFIED;
33472-4882
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Filter Feature: NO; Mounting Type: CABLE;
33472-1254
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Body Length: 1.285 inch; Mating Contact Finish: NOT SPECIFIED;
33472-0607
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Operating Temperature (Cel): 125; Termination Type: CRIMP; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved