Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DTP04-2P is a combination line connector with dimensions of 1.861" x 0.872" x 0.848". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is suitable for cable mounting applications and has a max current rating of 25A.
Median Price
$3.775
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
Boersig
1+ parts
$2.665
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$3.740
$2.690
$2.290
$2.150
RS (Exports)
$3.810
$3.110
$2.940
RS Americas
$4.200
$3.240
$2.860
Distrelec
$4.800
$3.781
Element14
$4.932
TE Connectivity
$5.000
Newark
$5.500
$4.840
$4.660
TTI
$2.610
$2.400
$2.330
Future Electronics
$2.320
$2.240
TTI Europe
$2.167
$2.048
Master Electronics
$2.309
$2.180
$2.164
Verical
$2.950
$2.598
Chip1Stop
$5.700
VNN
Digiode
$2.223
Nova Conductors
$2.930
CustomConnectorKits
$4.400
Component Electronics Inc.
$6.150
$4.620
$4.000
IBS Electronics
$2.679
$2.581
Bristol Electronics
NAC Semi
$4.780
$4.350
Electro Sonic
$2.740
$2.600
$2.570
Vyrian
LJR Electronics
Bisco
Extreme Components
Rapid Electronics
$4.769
LIBRA Elektronik GmbH
Q Components
TME
$3.404
$3.403
Speed Components Ltd
EMSNET
Semicontronic
$1.840
$1.794
$1.785
Corphita
$2.106
Gateway Technologies
$2.820
$2.509
Argo Parts USA
$2.916
Bastille Electronics
$2.784
$2.644
$2.608
Singapore Electronics
$3.101
$2.883
$2.759
$2.635
Continental Prestige Electronics
$5.010
$3.620
$2.620
Allen Electronics Distributors
$5.180
$4.500
Aztec Data Supply Inc.
$5.960
Advanced Electronics
$11.299
$10.734
Perfect Parts
Authorized Procurement Solutions
ErreBi Group
Eastek
Abacus Technologies
EMSNET (Excess)
Benley Electronics
Robosynatics
$15.508
Lucentia Tech
The specific body length ensures a proper fit in the designated space, making installation easier and more efficient.
The high rated voltage allows for reliable and safe operation in various electrical applications.
The high maximum operating temperature ensures the connector can perform effectively even in elevated temperature environments.
Being a combination line connector, this product offers versatile connectivity options for different types of electronic devices.
The high rated current capacity of 25A allows for efficient transmission of signals without any risk of overload or overheating.
The crimp termination type provides a secure and reliable connection, ensuring minimal signal loss and maximum conductivity.
Combination Line Connectors DTP04-2P attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DTP04-2P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
1N4148
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SS14
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
DT06-2S-EP11
TE Connectivity's DT06-2S-EP11 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, signal current of 13A, and female contact gender. Ideal for cable mounting applications requiring crimp termination with strain relief.
DRC22-50P01
TE Connectivity's DRC22-50P01 is a 2.25" x 3.293" x 1.187" combination line connector with 50 contacts, rated at 250V and 7.5A for signal current. It operates b/w -55°C to 125°C, UL certified with a flammability rating of 94V-0, ideal for board mounting applications requiring polarized male connectors with solder termination.
643424-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Contact Finish: TIN; Total No. of Contacts: 6;
54200206
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 2; MIL Conformity: NO; DIN Conformance: NO;
DT04-6P-CL06
TE Connectivity's DT04-6P-CL06 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 6 contacts and UL certification.
1-967640-1
TE Connectivity 1-967640-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, rated at 7.5A, and operates b/w -40 to 120 °C. Ideal for cable mounting applications due to its compact dimensions of 0.602" x 0.953" x 0.953".
DRC13-40PA-CG01
TE Connectivity's DRC13-40PA-CG01 is a 4-row combination line connector with dimensions of 1.39" x 3.742". Rated for 250V and 13A, it operates b/w -55°C to 125°C. Ideal for panel mounting applications, this male connector has a solder termination type and UL flammability rating of 94V-0.
AT04-3P-BM04
Amphenol
The Amphenol AT04-3P-BM04 is a combination line connector with 3 contacts, rated at 13A. It features a body size of 0.961" x 0.827" x 0.835", made of polyethylene for operating temperatures from -55°C to 125°C. Ideal for board mounting applications, it has male contact gender and solder termination.
DTP04-2P-C015
TE Connectivity's DTP04-2P-C015 is a combination line connector with dimensions of 1.861" x 0.872" x 0.848". It has a rated voltage of 200V and can operate b/w -55°C to 125°C. With UL certification, it offers 25A signal current capacity and features a male gender contact style for cable mounting applications.
AT06-2S-EC01
The Amphenol AT06-2S-EC01 is a female combination line connector with 2 contacts, rated for 13A signal current. Its compact dimensions of 0.591" x 0.72" x 1.232" make it suitable for cable mounting applications. With an operating temperature range of -55°C to 125°C, it utilizes polyethylene insulator material for reliable performance.
DRC26-50S01
TE Connectivity's DRC26-50S01 is a 5-row combination line connector with dimensions of 1.274" x 2.7" x 1.435". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 7.5A signal current. Ideal for applications requiring a polarized female connector with strain relief mounting for cables in temperatures ranging from -55°C to 125°C.
DT06-12SA-B016
TE Connectivity's DT06-12SA-B016 is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C, making it ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
AT4PS-CKIT
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
963598-1
TE Connectivity's 963598-1 is a Combination Line Connector with dimensions of 3.791" x 1.252" x 1.165". Featuring 68 contacts, rated at 20A, it operates b/w -40°C to 110°C. Ideal for cable mounting applications requiring polarized female connectors with a pitch of 4mm and row spacing of 0.157".
33482-2101
Molex
The Molex 33482-2101 is a Combination Line Connector with dimensions of 1.718" x 0.875" x 2.144". It has 20 contacts, male gender, and blade pin-skt style for crimp termination. Ideal for cable mounting applications requiring a two-row loaded connector with glass-filled polyamide/syndiotactic polystyrene insulator material.
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DTM06-4S
DTM06-4S by TE Connectivity is a combination line connector with 4 contacts, rated at 250V and 7.5A. It features a glass-filled polyamide insulator material, operates b/w -55 to 125°C, and has a UL flammability code of 94V-0. Ideal for applications requiring a polarized housing and crimp termination in cable mounting setups.
DT04-08PA-CL03
TE Connectivity's DT04-08PA-CL03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring a polarized male contact.
5-1718321-3
TE Connectivity 5-1718321-3 is a Combination Line Connector with dimensions 4.744" x 1.811" x 1.732". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 120°C. Ideal for applications requiring a polarized, UL-rated connector with 39 contacts and a current rating of 40A.
12047662
Aptiv
Aptiv's 12047662 Combination Line Connector features NYLON insulator, operating temp range -40 to 125 °C, and FEMALE contact gender. With a body size of 0.325" x 0.343" x 0.669", it is ideal for commercial applications requiring a reliable CRIMP termination type in cable mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTP06-4S-C015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: 1.374 inch; Body Length: 1.063 inch; Rated Current - Signal: 7.5 A;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Width: .868 inch; Filter Feature: NO;
DTP06-4S-E003
TE Connectivity's DTP06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring UL standards compliance.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -55 Cel; Additional Features: POALRIZED; Insulator Material: POLYETHYLENE;
DTP06-4S-EE01
TE Connectivity's DTP06-4S-EE01 is a combination line connector with dimensions of 1.866" x 1" x 1.026". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications requiring a max current of 25A.
DTP06-4S-E004
TE Connectivity's DTP06-4S-E004 is a combination line connector with dimensions of 1.364" x 0.868" x 0.96". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications requiring a 25A current signal.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.063 inch; Minimum Operating Temperature: -55 Cel;
DTP06-4S
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: POALRIZED; Total No. of Contacts: 4; Body Width: .866 inch;
TE Connectivity's DTP06-4S is a 1.364" x 0.868" x 0.96" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It has a UL flammability rating of 94V-0, operates b/w -55°C to 125°C, and features a polarized design suitable for cable mounting applications.
DTP06-4S-CE02
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mixed Contacts: NO; Total No. of Contacts: 4;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: PLUG; Body Depth: 1.374 inch; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DTP06-4S-CE03
TE Connectivity's DTP06-4S-CE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, suitable for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
DTP06-2S-CE09
TE Connectivity's DTP06-2S-CE09 is a combination line connector with dimensions of 1.867" x 0.883" x 0.711". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is suitable for applications requiring a 25A signal current and features a polarized housing with one port.
DTP04-4P-L012
TE Connectivity's DTP04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring a polarized, UL-certified connector with male contact gender.
DTP06-2S-E003
TE Connectivity's DTP06-2S-E003 is a 1.434" x 0.867" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. Featuring UL certification, it has 2 contacts, 25A signal current, FEMALE gender, and PLUG body style for CABLE mounting applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Style: RND PIN-SKT; No. of Rows Loaded: 1; Total No. of Contacts: 2;
DTP06-2S-EE01
TE Connectivity's DTP06-2S-EE01 is a 1.867" x 0.883" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A signal current. It features polarized housing, UL flammability code 94V-0, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with strain relief.
DTP06-2S
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: POALRIZED; Body Width: .732 inch; Maximum Operating Temperature (Cel): 125;
TE Connectivity's DTP06-2S is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 25A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
DTP04-4P-C015
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: 1.051 inch; Minimum Operating Temperature: -55 Cel; No. of Rows Loaded: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved