Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DT04-3P-CE04 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
Median Price
$1.780
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Boersig
1+ parts
$1.548
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.750
$1.260
$0.922
RS Americas
$1.400
$1.240
TE Connectivity
$2.150
DigiKey
$2.160
$1.562
$1.376
$1.229
Conrad
$3.265
Distrelec
$4.510
$3.735
$3.386
RS (Exports)
$6.370
TTI
$0.990
$0.910
$0.870
Master Electronics
$1.424
$0.878
$0.869
Verical
$1.813
$1.098
TTI Europe
$1.147
$1.070
Future Electronics
$1.040
$0.950
VNN
$1.056
Nova Conductors
$1.185
Digiode
$1.471
Vyrian
IBS Electronics
$1.805
$1.777
NAC Semi
$1.950
Electro Sonic
$0.965
$0.946
LJR Electronics
Q Components
Continental Prestige Electronics
$1.161
Argo Parts USA
Netroflash
$1.126
$1.102
Corphita
$1.393
Semicontronic
$2.110
$2.057
$2.047
Allen Electronics Distributors
$2.250
$2.070
Aztec Data Supply Inc.
$9.840
Advanced Electronics
$10.621
$10.090
Glotronic Ltd.
Authorized Procurement Solutions
The longer body length allows for better alignment and connection between the connectors, resulting in a more secure and stable connection.
The high rated voltage ensures that the connectors can handle large amounts of electricity, making them suitable for various applications.
The use of glass-filled polyamide as the insulator material provides excellent thermal and mechanical properties, enhancing the durability and reliability of the connectors.
The high maximum operating temperature allows the connectors to withstand high temperatures without compromising performance, making them suitable for use in different environments.
The high rated current ensures that the connectors can handle heavy electrical loads, making them suitable for high-power applications.
The strain relief feature helps prevent damage to the connectors and cables by relieving stress on the connection points, ensuring a longer lifespan for the product.
Combination Line Connectors DT04-3P-CE04 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT04-3P-CE04 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Material Change 18/JAN/2023 Multiple Devices Product Improvement Revision 07/Aug/2017
PCN Assembly/Origin - Molding process chg 30/AUG/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
M39029/56-351
Carlisle Interconnect Technologies
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Type: CRIMP; Removal Tools: M81969/8-06, M81969/14-02; IEC Conformity: NO; Contact Gender: FEMALE;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
SS14
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
DTM06-12SB
TE Connectivity's DTM06-12SB is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 7.5A signal current. Ideal for cable mounting applications requiring a polarized, UL-rated connector with 12 contacts and plug body style.
DT06-4S-CE13
TE Connectivity's DT06-4S-CE13 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief option.
DT06-2S
TE Connectivity's DT06-2S is a 1.118" combination line connector with insulation resistance of 1000000000 ohm, rated voltage of 250V, and operating temperature range from -55 to 125 °C. It features a glass-filled polyamide insulator and is ideal for commercial applications requiring a durable, polarized female connector with crimp termination.
SMS3P3
Souriau-sunbank Connection Technologies
SMS3P3 by Souriau-sunbank is a 0.232" wide, 0.984" deep combination line connector with 3 contacts rated at 7.5A. Made of glass-filled polyethylene, it's a female plug for cable mounting with crimp termination. Ideal for applications requiring UL94V-0 flammability code compliance and compact design.
480004-5
TE Connectivity's 480004-5 is a Combination Line Connector with dimensions of 1.27" x 0.71" x 1.275". Made of POLYAMIDE, it has 6 contacts, operates b/w -40°C to 105°C, and is UL certified for safety. Ideal for cable mounting applications at mains ratings of 115/230VAC.
1717394-2
TE Connectivity's 1717394-2 is a Combination Line Connector with dimensions of 0.638" x 1.63" x 0.787". Rated for 12V, it has GLASS FILLED POLYPHENYLENE SULFIDE insulator and operates b/w -30 to 105°C. With 24 contacts, it is used in board mounting applications for male connectors with SQ PIN-SKT contact style.
DTP06-4S-E003
TE Connectivity's DTP06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring UL standards compliance.
AT06-3S
Amphenol
The Amphenol AT06-3S is a Combination Line Connector with 3 contacts, rated at 13A. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring crimp termination, this connector has a compact body size of 0.894" x 0.724" x 1.138".
934446121
TE Connectivity 934446121 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Features include polarized key, terminal pitch of 4.45mm, and mains connector rating of 115/230VAC.
33482-4801
Molex
Molex 33482-4801 is a Combination Line Connector with dimensions of 0.887" L x 0.875" W x 2.144" D. It has 8 contacts, male gender, and blade pin-skt style. Used for cable mounting with crimp termination, ideal for applications requiring compact connectors.
AT04-6P
The Amphenol AT04-6P is a male combination line connector with 6 contacts, rated for 13A signal current. With a body size of 0.961" x 0.827" x 1.827", it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a receptacle contact style made of polyethylene insulator material.
DTM04-08PA-EE08
TE Connectivity's DTM04-08PA-EE08 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 150°C, and UL flammability rating of 94V-0. Ideal for applications requiring a male connector with cable mounting and strain relief option.
HVSL633063A106I
Amphenol's HVSL633063A106I is a 3-contact combination line connector with POLYAMIDE66 insulator. It has a max operating temp of 125°C and -40°C min temp. Ideal for cables, it features COPPER ALLOY shell material, TIN finish, and UL-rated 40A signal current capacity.
776231-1
TE Connectivity's 776231-1 is a Combination Line Connector with Mating Contact Pitch of 0.157", Insulation Resistance of 100MΩ, and Operating Temperature range from -40°C to 105°C. Ideal for board mounting applications, this connector features a total of 35 contacts in a polarized housing design.
12015792
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-2: LOCKING;
1-480318-0
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 2;
34791-0040
Molex 34791-0040 is a Combination Line Connector with dimensions of 0.476" x 0.367" x 0.743". It has 4 contacts, made of POLYBUTYLENE TEREPHTHALATE. Ideal for cable mounting applications requiring crimp termination, featuring female contact gender in receptacle body style.
174044-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Empty Shell: NO; IEC Conformity: NO;
DT04-4P-E003
TE Connectivity's DT04-4P-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male contact style with strain relief option.
AT04-3P-RY01
AT04-3P-RY01 by Amphenol is a combination line connector with a body length of 1.933" and depth of 1.91". It has a max operating temperature of 125°C and min operating temperature of -55°C. This male receptacle connector has 9 contacts and can handle a rated current of 13A, making it suitable for various applications requiring reliable signal transmission.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-CE03
TE Connectivity's DT04-2P-CE03 is a 1.818" x 0.675" x 0.67" Combination Line Connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male receptacle connector with strain relief option.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DT04-6P
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DT04-6P-CL09
TE Connectivity's DT04-6P-CL09 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a 13A signal current, this UL-rated connector features crimp termination and polarization key for secure connections.
DT04-3P
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
DT04-2P-RT01
TE Connectivity's DT04-2P-RT01 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a single receptacle connector with strain relief option.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
DT04-4P-C015
TE Connectivity's DT04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-6P-CE02
TE Connectivity's DT04-6P-CE02 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a polarized, crimp termination male connector with strain relief mounting option.
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved