Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The TE Connectivity DT04-6P is a combination line connector with 6 contacts, rated for 13A signal current and 250V voltage. Featuring nickel termination finish, glass-filled polyamide insulator, and UL94V-0 flammability code, it operates in temperatures from -55 to 125°C. Ideal for commercial applications requiring durable connectors with polarization key and strain relief mounting option.
Median Price
$2.400
Lifecycle Status
Suppliers In-Stock
43
In-Stock Inventory
1k+
Boersig
1+ parts
$0.880
100+ parts
-
1k+ parts
10k+ parts
TE Connectivity
$1.980
$1.630
$1.210
Chip1Stop
$2.010
RS (Exports)
$2.330
$1.840
Newark
$1.700
$1.450
$1.360
RS Americas
$2.440
$1.930
$1.710
Element14
$2.675
$2.090
$1.497
$1.297
Mouser Electronics
$2.730
$1.650
Farnell
$2.818
$1.947
$1.383
DigiKey
$2.890
$2.087
$1.774
$1.663
Conrad
$3.026
$2.712
Distrelec
$4.285
TTI
$2.910
$2.800
TTI Europe
$1.670
$1.128
Future Electronics
$1.250
$1.190
Master Electronics
$1.590
$1.400
$1.340
Verical
$1.995
$1.669
Digiode
$0.836
Vyrian
Nova Conductors
$1.735
TME
$1.540
$1.350
FDH Electronics
$2.600
$2.103
$1.959
Maritex
$2.014
$1.746
$1.565
CustomConnectorKits
$2.940
$1.990
IBS Electronics
$0.933
$2.356
NAC Semi
$2.540
Electro Sonic
$2.000
$1.660
$1.530
Lakeview Electronics
Chip Stock
PC Components Company LLC
Bristol Electronics
Q Components
Extreme Components
Rapid Electronics
$1.687
Bisco
Classic Components Corporation
Jameco Electronics
Resion
EMSNET
American Connector Supply Corp
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Van Brakel Electronic
LWI Electronics Inc
Semicontronic
$0.750
$0.731
$0.728
Corphita
$0.792
Advanced Electronics
$1.142
$1.085
Aztec Data Supply Inc.
$1.150
Argo Parts USA
Continental Prestige Electronics
$1.620
Modulus Dynamics
$5.828
Perfect Parts
EMSNET (Excess)
Authorized Procurement Solutions
Abacus Technologies
ErreBi Group
Robosynatics
$8.089
$7.924
Lucentia Tech
Benley Electronics
Cyclops Electronics Ltd (Excess)
Netroflash
$1.648
$1.614
The compact size of the connector allows for easy installation in tight spaces without sacrificing functionality.
High insulation resistance ensures reliable performance and minimizes the risk of electrical shorts or malfunctions.
Nickel finish provides superior corrosion resistance, ensuring longevity and durability of the connector.
Suitable for a wide range of applications and compatible with standard voltage requirements.
Can withstand high temperatures, making it suitable for use in various environments without risk of overheating.
Multiple rows allow for efficient and organized connection of multiple wires or cables, reducing clutter and simplifying installation.
The black color of the insulator helps in easy identification and organization of connectors during installation and maintenance.
Combination Line Connectors DT04-6P attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Arrangement:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
Durability:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DT04-6P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - DT0y- Housing chg 06/APR/2021 Material Change 18/JAN/2023
PCN Assembly/Origin - Molding process chg 30/AUG/2022
PCN Packaging - DT0y - packaging chg 28/JUN/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Goodwork Semiconductor
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
1N4148
Diotec Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
Grande Electronics
Semiconductors
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
RC0402FR-071KL
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Space Power Electronics
BSS138
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
DT04-12PA-C015
TE Connectivity's DT04-12PA-C015 is a Combination Line Connector with 12 contacts, rated at 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized connector with crimp termination and strain relief mounting.
967635-1
TE Connectivity's 967635-1 is a Combination Line Connector with dimensions of 1.673" x 1.082" x 1.318". It has 21 contacts, operates b/w -40°C to 140°C, and is suitable for board mounting applications at mains ratings of 115/230VAC.
AT06-6S-OMBLK
Amphenol
The Amphenol AT06-6S-OMBLK is a combination line connector with 6 contacts, rated for 13A signal current. It has a compact body size of 0.882" x 0.874" x 1.815", suitable for cable mounting applications. With an operating temperature range from -55°C to 125°C, it uses crimp termination and mates with AT06-6P-OMBLK connectors.
7282-1091
Yazaki
The Yazaki 7282-1091 is a Combination Line Connector with 49 contacts, made of POLYBUTYLENE TEREPHTHALATE. It features a male contact gender and mating info with 7283-1091. This connector is used in cable mounting applications for electrical connections.
AT04-12PA-RD01
The Amphenol AT04-12PA-RD01 is a Combination Line Connector with 12 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a body size of 1.598" x 0.882" x 1.996".
34062-0023
Molex
Molex 34062-0023 is a Combination Line Connector with 0.866"x.654"x1.268" dimensions, operating from -40 to 125°C. It has 2 contacts, glass-filled polyamide6 shell material, and crimp termination for cable mounting. Ideal for applications requiring female SQ pin-skt contact style in receptacle body design.
DT06-08SB-CE05
TE Connectivity's DT06-08SB-CE05 is a combination line connector with dimensions of 1.267" x 0.872" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 13A.
AT04-12PA-LE14
COMBINATION LINE CONNECTOR;
12015782
Aptiv
DTP06-4S-EE01
TE Connectivity's DTP06-4S-EE01 is a combination line connector with dimensions of 1.866" x 1" x 1.026". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications requiring a max current of 25A.
ATP06-4S-KIT01
ATP06-4S-KIT01 by Amphenol is a 2-row combination line connector with POLYETHYLENE insulator. It has 4 contacts, rated at 25A for signals, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring crimp termination, featuring female contact gender and plug body style.
DT06-2S-P012
TE Connectivity's DT06-2S-P012 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C operating temperatures. It features a polarized design, UL certification, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a female plug contact style with strain relief option.
F083110
F083110 by Aptiv is a Combination Line Connector with 2 contacts, rated for 35A signal current. It operates b/w -40 to 125°C, featuring a copper alloy shell with TIN finish. Ideal for cable mounting applications, it offers crimp termination and round pin/socket contact style.
33472-4801
Molex 33472-4801 is a Combination Line Connector with 8 contacts in 2 rows. Made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE, it operates b/w -40°C to 125°C. Ideal for cable mounting, this female connector uses crimp termination and is commonly used in various electronic applications.
DT04-6P-L012
TE Connectivity's DT04-6P-L012 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and panel mounting option.
174046-2
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Contact Material: NOT SPECIFIED; Empty Shell: NO;
MX23A34NF1
Japan Aviation Electronics Industry
MX23A34NF1 by Japan Aviation Electronics is a Combination Line Connector with dimensions 2.283" x 0.72" x 1.507". It features 34 contacts made of brass with TIN finish, suitable for board mounting and waterproof applications. The insulator material is glass filled polybutylene terephthalate, making it durable and reliable for various electronic connections.
DTM06-6S-E004
TE Connectivity's DTM06-6S-E004 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT06-08SA-CE10
TE Connectivity's DT06-08SA-CE10 is a combination line connector with dimensions of 1.217" x 0.776" x 1.465". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a max current rating of 13A and UL flammability code of 94V-0.
DT15-08PA
The TE Connectivity DT15-08PA is a combination line connector with 8 contacts, rated voltage of 250V, and UL flammability code of 94V-0. It has a body size of 1.545" x 2.17" x 1.185", suitable for board mounting applications in temperatures ranging from -55°C to 125°C. This male connector with solder termination is ideal for signal currents up to 13A in polarized configurations.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DT04-3P-P007
TE Connectivity's DT04-3P-P007 is a 1.89"x1.732"x.973" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 13A signal current. Operating from -55 to 125°C, it has a UL94V-0 flammability rating and features a polarized design for secure connections in cable mounting applications.
DT04-2P-E005
TE Connectivity's DT04-2P-E005 is a 1.818" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male contact gender and crimp termination with strain relief.
DT04-2P
The TE Connectivity DT04-2P is a combination line connector with 1.708" body length, 250V rated voltage, and GLASS FILLED POLYAMIDE insulator material. It is ideal for applications requiring a durable connector with 13A signal current rating, -55 to 125°C operating temperature range, and UL flammability rating of 94V-0.
DT04-2P-C015
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-E004
TE Connectivity's DT04-2P-E004 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
DT04-2P-CE03
TE Connectivity's DT04-2P-CE03 is a 1.818" x 0.675" x 0.67" Combination Line Connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a male receptacle connector with strain relief option.
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
DT04-3P-P006
TE Connectivity's DT04-3P-P006 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and comes with strain relief option.
DT04-4P-L012
TE Connectivity's DT04-4P-L012 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a male contact style, crimp termination type, and panel mounting option with strain relief.
DT04-6P-CL09
TE Connectivity's DT04-6P-CL09 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a 13A signal current, this UL-rated connector features crimp termination and polarization key for secure connections.
DT04-3P
TE Connectivity's DT04-3P is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C. Ideal for applications requiring a polarized, male contact style connector with crimp termination and strain relief mounting option.
Connecteurs Electriques Deutsch
COMBINATION LINE CONNECTOR; IEC Conformity: NO; MIL Conformity: NO; DIN Conformance: NO; Body or Shell Style: RECEPTACLE; Manufacturer Series: DT;
DT04-2P-RT01
TE Connectivity's DT04-2P-RT01 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 13A signal current. Ideal for cable mounting applications requiring a single receptacle connector with strain relief option.
DT04-3P-E008
TE Connectivity's DT04-3P-E008 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring polarized, UL-certified connectors with strain relief.
DT04-4P-E008
TE Connectivity's DT04-4P-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief.
DT04-4P-C015
TE Connectivity's DT04-4P-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
DT04-6P-CE02
TE Connectivity's DT04-6P-CE02 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and UL flammability code of 94V-0. Ideal for applications requiring a polarized, crimp termination male connector with strain relief mounting option.
DT04-12PA-P021
TE Connectivity's DT04-12PA-P021 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 250V and 13A, suitable for applications requiring a temperature range of -55 to 125°C. The connector features UL94V-0 flammability code and polarization key for secure mating.
DT04-4P
The TE Connectivity DT04-4P is a combination line connector with 4 contacts, rated for 13A signal current at 250V. Featuring glass-filled polyamide insulation, it operates b/w -55 to 125°C and offers high durability with 100 cycles. Ideal for commercial applications requiring reliable male crimp termination in cable mounting setups.
DT04-6P-CE01
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: .972 inch; Terminal Pitch (mm): 9.12;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved