Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Aptiv's 54201411 is a Combination Line Connector with dimensions of 1.311" x 0.882" x 0.945". It features POLYAMIDE insulator material, 3 rows, and 14 FEMALE contacts. Ideal for automotive applications requiring compact yet efficient connectors.
Median Price
$6.821
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
RS (Exports)
1+ parts
-
100+ parts
1k+ parts
$6.146
10k+ parts
Nova Conductors
$5.605
CustomConnectorKits
$11.990
DF Sales Co.
$14.300
Q Components
TME
$1.540
Vyrian
ABC Electronics Ltd.
Corohmni
$4.513
Advanced Electronics
$4.648
$4.416
Continental Prestige Electronics
$5.493
Netroflash
$5.325
$5.213
Ampacity Inc.
$5.800
Semicontronic
$5.655
$5.626
AZTECH Wire
$19.408
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
EMSNET (Excess)
GreenTree Electronics
Abacus Technologies
Robosynatics
Lucentia Tech
$0.235
ErreBi Group
The compact size of the body makes this connector suitable for tight spaces or densely populated areas.
With a slim body width, this connector can easily fit into crowded panels or enclosures.
The shallow body depth allows for easy installation in narrow structures or limited spaces.
The high-quality polyamide insulator material provides excellent electrical insulation and durability.
With 3 rows loaded, this connector offers increased contact density and functionality.
The versatile combination line connector design allows for various types of connections to be made in one unit.
The high number of contacts enables multiple connections to be established simultaneously.
The female contact gender ensures compatibility with a wide range of male connectors, enhancing connectivity options.
Combination Line Connectors 54201411 attributes and parameters. Explore more Combination Line Connectors devices from Aptiv
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mixed Contacts:
No. of Rows Loaded:
Option:
Total No. of Contacts:
54201411 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
NSN
5935-01-617-1064, 5935016171064
NIIN
016171064
Aptiv's signal and power solutions segment supplies components and systems that make up a vehicle's electrical system backbone, including wiring assemblies and harnesses, connectors, electrical centers, and hybrid electrical systems. The advanced safety and user experience segment provides body controls, infotainment and connectivity systems, passive and active safety electronics, advanced driver-assist technologies, and displays, as well as the development of software for these systems. Aptiv's largest customer is General Motors at roughly 12% of 2021 revenue, including sales to GM's Shanghai joint venture, followed by Stellantis at 11%, and Volkswagen at 9%. North America and Europe represented approximately 38% and 33% of total 2019 revenue, respectively.
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Toshiba
Rectron
SMBJ18CA
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM358AN
Samsung
1554216004
Molex
WIRE AND CABLE;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
64333-0100
Molex 64333-0100 is a POLYAMIDE Combination Line Connector with 4 rows, 112 contacts, and rated current of 12A. It operates b/w -40°C to 105°C, suitable for board mounting applications requiring male solder termination.
DT06-08SA-C015
TE Connectivity
TE Connectivity's DT06-08SA-C015 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with strain relief.
DT06-08SA
TE Connectivity's DT06-08SA is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
DT15-12PA
TE Connectivity's DT15-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE46 insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, suitable for panel mounting applications. The connector features a straight shell style with RND PIN-SKT contact gender, ideal for signal connections in various industries.
SMS36SE4K9
Souriau
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; Shell Material: GLASS FILLED POLYETHYLENE; Empty Shell: NO;
12065287
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mixed Contacts: NO; DIN Conformance: NO;
ATM15-08PA-BM03
Amphenol
The Amphenol ATM15-08PA-BM03 is a Combination Line Connector with 8 contacts, rated at 7.5A signal current. It has a body size of 2.071" x 1.303" x 1.189", made of POLYETHYLENE for -55 to 125°C applications. Ideal for board and panel mounting, featuring male contact gender with round pin sockets for various electronic connections.
DTM04-3P-E004
TE Connectivity's DTM04-3P-E004 is a 1.62" x 0.816" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has 3 contacts, UL94V-0 flammability code, and is polarized for signal currents up to 7.5A. Ideal for cable mounting applications requiring a male receptacle with strain relief option.
MX23A34NF1
Japan Aviation Electronics Industry
MX23A34NF1 by Japan Aviation Electronics is a Combination Line Connector with dimensions 2.283" x 0.72" x 1.507". It features 34 contacts made of brass with TIN finish, suitable for board mounting and waterproof applications. The insulator material is glass filled polybutylene terephthalate, making it durable and reliable for various electronic connections.
33472-0601
Molex 33472-0601 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED POLYAMIDE Insulator, and 22A Rated Current. It is used for commercial applications, featuring a polarized housing and crimp termination for secure cable mounting.
54201412
Aptiv
Aptiv's 54201412 is a Combination Line Connector with dimensions of 1.311" x 0.882" x 0.945". It features POLYAMIDE insulator material, 3 rows loaded, and 14 FEMALE contacts. Ideal for automotive applications requiring reliable electrical connections in tight spaces.
DT04-48P-B016
TE Connectivity's DT04-48P-B016 is a 48-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, UL-certified connector with panel mounting option.
AW4S
COMBINATION LINE CONNECTOR;
DT06-12SA-CE10
The TE Connectivity DT06-12SA-CE10 is a Combination Line Connector with dimensions of 1.218" x 0.716" x 1.597". It has a rated voltage of 250V, UL Flammability Code of 94V-0, and can handle up to 13A current. Ideal for applications requiring a polarized, female plug connector with strain relief mounting for cables.
929504-1
TE Connectivity's 929504-1 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, rated at 29A for signal current, and operates b/w -40 to 130°C. Ideal for cable mounting applications requiring a polarized female connector with 2 loaded rows.
DT06-2S-E004
TE Connectivity's DT06-2S-E004 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V and 13A, it features a polarized design, UL certification, and crimp termination for cable mounting applications.
9-1452380-9
TE Connectivity's 9-1452380-9 is a Combination Line Connector with dimensions 3.067" x 1.654" x 1.406". Rated for 14V, it has GLASS FILLED POLYAMIDE insulator and supports up to 30A signal current. Ideal for applications requiring a polarized connector with 96 contacts and operating temperatures from -40°C to 130°C.
DT13-12PA-R015
TE Connectivity's DT13-12PA-R015 is a combination line connector with a body length of 2.298" and width of 5.62". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, with its right angle mounting style and solder termination type, is commonly used in board applications requiring a polarized, male contact connector with 48 contacts.
DT06-2S-EP11
TE Connectivity's DT06-2S-EP11 is a 1.611" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, signal current of 13A, and female contact gender. Ideal for cable mounting applications requiring crimp termination with strain relief.
AT06-08SA-SR2BK
The Amphenol AT06-08SA-SR2BK is a 8-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operates b/w -55°C to 125°C, and features a plug body style. Ideal for cable mounting applications requiring reliable female contact pins in two rows.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
54201411
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Empty Shell: NO; Filter Feature: NO;
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; MIL Conformity: NO; Total No. of Contacts: 14;
54201009
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Total No. of Contacts: 10; Mating Contact Finish: NOT SPECIFIED;
Aptiv's 54201009 is a Combination Line Connector with dimensions of 1.389" x 1.236" x 1.488". It features POLYAMIDE insulator material, 2 rows, and 10 contacts for FEMALE crimp termination. Ideal for automotive wiring harnesses due to its compact size and reliable connectivity.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; IEC Conformity: NO; Total No. of Contacts: 10;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body Width: .882 inch; Total No. of Contacts: 14;
54200409
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYAMIDE; Mixed Contacts: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Body Depth: 1.528 inch; Filter Feature: NO;
Aptiv's 54200409 is a Combination Line Connector with dimensions of 1.283" x 0.874" x 1.528". Made of POLYAMIDE, it has 4 FEMALE contacts and is ideal for automotive applications.
54201016
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; IEC Conformity: NO; Body Width: .563 inch;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; DIN Conformance: NO; Mixed Contacts: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Body Depth: 1.106 inch; Body Length: 1.187 inch;
54201415
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Width: 1.006 inch; DIN Conformance: NO; Filter Feature: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 14; IEC Conformity: NO; DIN Conformance: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYAMIDE; DIN Conformance: NO; Body Depth: 1.378 inch;
54200206
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; No. of Rows Loaded: 1; Filter Feature: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO;
54201418
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.378 inch; DIN Conformance: NO; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved