Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity's DTM06-12SB is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V, operating temperature range from -55 to 125 °C, and can handle up to 7.5A signal current. Ideal for cable mounting applications requiring a polarized, UL-rated connector with 12 contacts and plug body style.
Median Price
$2.560
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
RS Americas
1+ parts
$1.880
100+ parts
$1.600
1k+ parts
-
10k+ parts
TE Connectivity
$1.990
$1.340
$1.180
Mouser Electronics
$2.610
$1.590
$1.550
Element14
$3.011
$1.876
$1.654
Boersig
$3.156
DigiKey
$3.200
$2.307
$1.961
$1.839
Newark
$3.330
$2.060
$2.030
Farnell
$3.576
$2.569
$1.975
Conrad
$3.781
$3.381
TTI
$1.620
Future Electronics
$1.380
$1.320
TTI Europe
$2.080
$1.452
Master Electronics
$1.960
$1.720
Verical
$2.459
$2.050
Chip1Stop
$2.470
$2.110
Digiode
$1.112
Vyrian
$1.170
VNN
TME
$2.590
$1.910
$1.780
Electro Sonic
$2.810
$1.800
$1.750
CustomConnectorKits
$3.000
Nova Conductors
$5.459
IBS Electronics
$2.735
$1.907
NAC Semi
$2.800
$2.550
EMSNET
Q Components
ABC Electronics Ltd.
Lakeview Electronics
LJR Electronics
Extreme Components
Bisco
Elcom Components
DF Sales Co.
PC Components Company LLC
Bristol Electronics
Semicontronic
$0.990
$0.965
$0.960
Corphita
$1.053
Advanced Electronics
$1.662
$1.579
Argo Parts USA
$1.838
Continental Prestige Electronics
$3.160
$2.230
Allen Electronics Distributors
Aztec Data Supply Inc.
$5.218
Perfect Parts
ErreBi Group
Abacus Technologies
iodParts Technologies Inc.
$2.714
Robosynatics
Lucentia Tech
EMSNET (Excess)
Authorized Procurement Solutions
Eastek
The compact size of the body allows for easy installation and saves space.
Suitable for high voltage applications, providing reliable connectivity.
Offers excellent insulation properties, ensuring the safety and durability of the connector.
Can withstand high temperatures, making it suitable for various environments.
Meets strict safety standards for flammability, ensuring peace of mind during use.
Capable of handling high signal currents, ideal for demanding applications.
Provides multiple connection points, allowing for versatile use in multiple configurations.
Easy installation on cables, simplifying the integration of the connector.
Crimping termination ensures secure and reliable connections, reducing the risk of signal loss or interference.
Combination Line Connectors DTM06-12SB attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Connectors:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
DTM06-12SB Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - End of Life 31/AUG/2022
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRGCQ0805F10R
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Plessey Semiconductors Discrete Components Div
Other Transistors;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
M24308/2-1F
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
DTM06-12SB-E003
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
54200206
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 2; MIL Conformity: NO; DIN Conformance: NO;
DTM04-2P-E007
TE Connectivity's DTM04-2P-E007 is a 2.005" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, polarized key, and male gender suitable for cable mounting applications at 7.5A signal current.
64320-3319
Molex 64320-3319 is a waterproof combination line connector with 48 contacts. Made of glass-filled PBT/PET, it features female crimp contacts for cable mounting applications. Ideal for industrial machinery and automotive electronics due to its durable construction and high contact count.
1-1456426-5
TE Connectivity 1-1456426-5 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 4 contacts, operates b/w -40 to 150°C, and supports 115/230VAC mains connector rating. Ideal for cable mounting applications due to its compact dimensions of 0.972" x 1.043" x 0.689".
3-1418469-1
TE Connectivity's 3-1418469-1 is a Combination Line Connector with dimensions of 1.693"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40 to 140°C. With UL certification, it features 6 contacts at 0.118" spacing, ideal for cable mounting applications at up to 20A signal current.
DTM04-12PA-E003
TE Connectivity's DTM04-12PA-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. It has 12 contacts, rated at 7.5A and 250V, suitable for applications requiring a polarized, UL-rated connector with operating temperatures from -55 to 125°C.
DT04-08PA-CL03
TE Connectivity's DT04-08PA-CL03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for panel mounting applications requiring a polarized male contact.
9-966140-2
TE Connectivity's 9-966140-2 is a Combination Line Connector with 15 contacts, rated at 24V. With a body length of 1.614" and width of 0.791", it operates b/w -40 to 100°C. Ideal for panel mounting applications, this connector features right angle mounting style and solder termination.
DT04-12PA-CE09
TE Connectivity's DT04-12PA-CE09 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL certification.
929505-7
TE Connectivity's 929505-7 is a Combination Line Connector with dimensions of 2.51"x0.881"x1.02". It has 22 contacts, rated at 29A for signal current, and operates b/w -40°C to 130°C. Ideal for applications requiring a polarized male connector with panel mounting capabilities.
1-776163-5
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Contact Material: BRASS; DIN Conformance: NO;
DT04-2P-RT02
TE Connectivity's DT04-2P-RT02 is a 1.555" x 1" x 0.873" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125 °C. It has UL94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring crimp termination with strain relief.
1-770968-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: NO; Manufacturer Series: 770968; UL Flammability Code: 94V-0;
30700-1120
The Molex 30700-1120 Combination Line Connector features a body size of 0.808" x 0.928" x 1.243", with SYNDIOTACTIC POLYSTYRENE insulator material. It has 12 contacts, rated for 7A signal current, suitable for board mounting applications. Operating temperature range is -40 to 100°C, with solder termination and male SQ PIN-SKT contact style.
12015797
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 4; Mixed Contacts: NO; Mating Contact Finish: NOT SPECIFIED;
776164-2
TE Connectivity's 776164-2 is a Combination Line Connector with dimensions of 2.496" x 1.323" x 1.362". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL Flammability Code 94V-0, and rated current of 17A. Ideal for applications requiring a polarized connector with 35 contacts and operating temperatures from -40°C to 125°C.
DT06-3S-P012
TE Connectivity's DT06-3S-P012 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
AT04-12PA-PM05
Amphenol
The Amphenol AT04-12PA-PM05 is a 2x12 Combination Line Connector with POLYETHYLENE insulator. It has a rated current of 13A, operating temperature range from -55 to 125°C, and male contact gender. Ideal for cable and panel mounting applications requiring reliable signal connections in compact spaces.
HC18B-S32
The Amphenol HC18B-S32 is a 32-contact combination line connector with a body size of 1.969" x 1.661" x 1.374". Rated for 5A signal current, UL94V-0 flammability, and operating temperatures from -40°C to 125°C. Ideal for cable mounting applications requiring female contacts in a plug shell style with round pin/socket contact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DTM04-2P-P007
TE Connectivity's DTM04-2P-P007 is a 2" x 0.651" x 1.473" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V, it has UL 94V-0 flammability code and supports up to 7.5A signal current. Ideal for panel mounting applications requiring a polarized male receptacle connector with strain relief option.
DTM04-2P
TE Connectivity's DTM04-2P is a 1.62" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL certification, and polarized design. Ideal for applications requiring a 7.5A signal current in cable mounting setups with crimp termination and strain relief option.
DTM06-12SA
TE Connectivity's DTM06-12SA is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, female contact style with crimp termination.
DTM04-2P-P006
TE Connectivity's DTM04-2P-P006 is a 1.68" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator for 250V, -55 to 125 °C operation. It features UL 94V-0 flammability, polarized key, and male contact gender suitable for cable mounting applications at 7.5A signal current rating.
DTM06-12SA-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Body Length: 1.245 inch; Mounting Option-2: W/STRAIN RELIEF;
DTM04-2P-EP10
TE Connectivity's DTM04-2P-EP10 is a 1.68"x.651"x.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports 7.5A signal current. Ideal for cable mounting applications requiring a male receptacle contact style with strain relief option.
DTM06-2S-P006
DTM06-2S-P006 by TE Connectivity is a combination line connector with dimensions of 1.145" x 0.569" x 0.508". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is commonly used for cable mounting applications, offering a crimp termination type and a max current rating of 7.5A.
DTM04-2P-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Filter Feature: NO; Contact Style: RND PIN-SKT;
DTM06-2S-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; No. of Rows Loaded: 1; Mounting Option-2: W/STRAIN RELIEF;
DTM06-12SA-EE04
TE Connectivity's DTM06-12SA-EE04 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55 to 150°C. Ideal for cable mounting applications requiring a polarized, female plug with strain relief option.
DTM04-2P-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Connectors: ONE; Body Length: 1.68 inch; IEC Conformity: NO;
DTM06-2S-EP10
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: CRIMP; Rated Voltage: 250 V;
DTM04-2P-EE03
TE Connectivity's DTM04-2P-EE03 is a combination line connector with 2.005"x.651"x.638" dimensions, rated for 250V and 125°C. Ideal for applications requiring a polarized male receptacle with UL certification, suitable for signal currents up to 7.5A in cable mounting setups with strain relief option available.
DTM06-2S-E005
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Type: CABLE; Body Depth: .508 inch;
DTM06-2S-E003
TE Connectivity's DTM06-2S-E003 is a 1.145" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has a polarized design with 7.5A signal current rating. Ideal for cable mounting applications requiring crimp termination and strain relief.
DTM06-2S-EE03
TE Connectivity's DTM06-2S-EE03 is a 1.47" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring polarized housing, UL 94V-0 flammability code, and crimp termination, it's ideal for cable mounting applications requiring a 7.5A signal current.
DTM04-6P-E004
TE Connectivity's DTM04-6P-E004, a 1.72" x 0.756" x 0.937" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 6 contacts, UL94V-0 flammability code, and male gender for cable mounting applications at 7.5A signal current.
DTM04-6P-E003
TE Connectivity's DTM04-6P-E003 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
DTM06-12SB-E007
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; EMI Shielded: NO; Rated Voltage: 250 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved