Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 194180030 is a COMBINATION LINE CONNECTOR with 16 contacts, FEMALE gender, RECEPTACLE body style. It uses CRIMP termination and CABLE mounting type. Ideal for various electronic applications requiring reliable connectivity.
Median Price
$12.840
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Verical
1+ parts
$9.540
100+ parts
$9.200
1k+ parts
$9.020
10k+ parts
-
TTI
$12.320
$9.550
$8.640
Mouser Electronics
$13.360
$10.410
$8.730
DigiKey
$13.470
Newark
$13.670
$10.220
$9.510
RS (Exports)
$14.390
Element14
$15.170
Master Electronics
$10.100
$8.690
NEP Electronics
Powell Electronics
$9.250
$8.910
Chip1Stop
$9.450
$9.170
Nova Conductors
$8.225
Digiode
$8.702
VNN
Vyrian
IBS Electronics
$11.097
$10.688
$8.545
TME
$13.510
Aztec Data Supply Inc.
$6.328
Semicontronic
$7.790
$7.595
$7.556
Continental Prestige Electronics
$8.060
Netroflash
Corphita
$8.244
Allen Electronics Distributors
$12.730
Argo Parts USA
A combination line connector offers versatility by allowing multiple types of connections within a single connector, reducing the need for multiple connectors and saving space.
With 16 contacts, this connector provides ample connectivity options for various applications, offering flexibility in connecting different components or devices.
The cable mounting type allows for easy installation and secure connection to a cable, ensuring reliability and durability in various settings.
Crimp termination provides a reliable and robust connection by mechanically securing the wire to the connector, minimizing the risk of disconnection or signal loss.
Female contacts are commonly used for receptacles, promoting a secure and stable connection with male connectors or pins, ensuring proper signal transmission.
The receptacle style of the body or shell ensures that the connector can accept mating connectors or plugs, enhancing compatibility and ease of use in various applications.
Combination Line Connectors 194180030 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
194180030 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BAV99WT1G
Fairchild Semiconductor
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Philips Semiconductors
Thinking Electronic Industrial
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM555CM
Harris Semiconductor
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
732-8256-20
TE Connectivity
TE Connectivity's 732-8256-20 is a Combination Line Connector with -55 to 175 °C operating temperature range. Featuring 12 contacts, rated at 7.5A for signal current, it is ideal for board mounting applications requiring female solder termination.
966140-6
TE Connectivity's 966140-6 is a Combination Line Connector with 21 contacts, rated at 24V. It has a body length of 2.008" and width of 0.791", suitable for panel mounting applications. With a temperature range from -40 to 100°C, it offers solder termination and right-angle mounting style.
DTM04-12PA-E005
TE Connectivity's DTM04-12PA-E005, a Combination Line Connector, features GLASS FILLED POLYAMIDE insulator material. With 12 contacts and rated voltage of 250V, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized connector with UL flammability rating of 94V-0.
DTM1312PA12PBR008
TE Connectivity's DTM1312PA12PBR008 is a 24-contact combination line connector with 2 loaded rows. It features a rated voltage of 250V, UL flammability code of 94V-0, and operates b/w -55°C to 125°C. Ideal for board mounting applications requiring a male contact gender and solder termination.
AT04-2P-PM11
Amphenol
AT04-2P-PM11 by Amphenol is a 2.185" x 1.457" x 0.685" combination line connector with 13A signal current rating, male gender, and round pin/socket contact style. It operates b/w -55°C to 125°C, suitable for cable mounting applications like AT04-2S-PM11 mating info.
DTP06-4S-C015
TE Connectivity's DTP06-4S-C015 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, suitable for cable mounting applications. With UL certification and polarized design, this plug connector offers secure and reliable connections.
154719-2
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Filter Feature: NO; UL Flammability Code: 94V-2; MIL Conformity: NO; Body or Shell Style: RECEPTACLE;
1-967616-1
TE Connectivity 1-967616-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, rated at 7.5A for signal current, and operates b/w -40 to 120°C. Ideal for cable mounting applications due to its compact dimensions of 0.945" x 0.669" x 1.197".
DT06-2S-E004
TE Connectivity's DT06-2S-E004 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V and 13A, it features a polarized design, UL certification, and crimp termination for cable mounting applications.
348302004
Molex
Molex 348302004 is a Combination Line Connector with 20 contacts, made of copper alloy. It features a body length of 2.552" and width of 0.826", with matte tin over nickel finish. Ideal for board mounting applications due to its glass-filled polybutylene terephthalate insulator material.
1-480699-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: MATE-N-LOK; DIN Conformance: NO; Contact Material: NOT SPECIFIED;
DTM06-4S-E007
TE Connectivity's DTM06-4S-E007 is a 1.57" x 0.694" x 0.685" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 4 contacts, UL certification, and a 7.5A signal current rating, it is ideal for cable mounting applications requiring polarized female connectors with strain relief.
DT06-3S-CE06
TE Connectivity's DT06-3S-CE06 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulation. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
F083110
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Empty Shell: YES; Mounting Type: CABLE; Total No. of Contacts: 2; Termination Type: CRIMP;
ATM06-12SA
The Amphenol ATM06-12SA is a 2-row combination line connector with 12 contacts, rated at 7.5A signal current. With a body size of 1.76" x 0.602" x 1.185", it uses POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female SQ PIN-SKT contacts in plug configuration.
DT04-12PA-LE01
TE Connectivity's DT04-12PA-LE01 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has 12 contacts and operates b/w -55 to 125 °C. Ideal for applications requiring a polarized, crimped male connector with strain relief on panel mounting.
DTP04-4P-E003
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: RND PIN-SKT; Mixed Contacts: NO; Body Length: 1.063 inch;
ATM13-12PA-12PB-BM03
The Amphenol ATM13-12PA-12PB-BM03 is a 24-contact combination line connector with POLYETHYLENE insulator. It has a rated current of 7.5A and operates b/w -55°C to 125°C. Ideal for board mounting applications, featuring female contact gender and round pin/socket style contacts.
DT04-6P-C015
TE Connectivity's DT04-6P-C015 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, male contact style with strain relief option.
12010996
Aptiv
Aptiv's 12010996 is a Combination Line Connector with POLYAMIDE66 insulator. It features crimp termination, male contact gender, and cable mounting type. Ideal for applications requiring reliable connections in automotive wiring systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
194190012
Molex 194190012 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
194190015
Molex 194190015 is a COMBINATION LINE CONNECTOR with 10 contacts, suitable for CABLE mounting and CRIMP termination. Ideal for applications requiring MALE connectors in PLUG body style.
194180002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 8;
194190011
Molex 194190011 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
194180026
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 12;
19418-0005
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
194190021
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO; Mounting Type: CABLE;
194180029
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; IEC Conformity: NO; Mounting Type: CABLE;
194180001
Molex 194180001 is a Combination Line Connector with 0.22" pitch, 18A signal current rating, and -40 to 125°C operating temperature range. Ideal for commercial applications requiring a polarized housing, crimp termination, and UL94V-0 flammability rating.
19418-0007
Molex 19418-0007 is a COMBINATION LINE CONNECTOR with 2 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for various electronic applications requiring reliable connectivity.
194180014
Molex 194180014 is a COMBINATION LINE CONNECTOR with 10 FEMALE contacts for CABLE mounting. Features CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable connectivity.
194180020
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Manufacturer Series: 19418; Contact Material: NOT SPECIFIED;
194180027
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 12; DIN Conformance: NO;
19418-0004
Molex 19418-0004 is a COMBINATION LINE CONNECTOR with 4 contacts, FEMALE gender, and CABLE mounting. It uses CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable cable connections.
194180022
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG; Body Length: 1.332 inch;
194190007
The Molex 194190007 is a COMBINATION LINE CONNECTOR with 2 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for applications requiring reliable connection in various electronic devices.
194190008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Body or Shell Style: PLUG; Mounting Type: CABLE;
194190005
The Molex 194190005 is a COMBINATION LINE CONNECTOR with 4 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for various applications requiring reliable connectivity in compact spaces.
194180038
Molex 194180038 is a COMBINATION LINE CONNECTOR with 12 contacts, FEMALE gender, and RECEPTACLE body style. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
194180010
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved