Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 194190008 is a COMBINATION LINE CONNECTOR with 2 contacts, suitable for CABLE mounting. It features MALE gender and PLUG body style, ideal for CRIMP termination applications in various electronic devices.
Median Price
$2.630
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$1.680
100+ parts
$1.709
1k+ parts
$1.518
10k+ parts
-
Interstate Connecting
$1.905
$1.670
$1.508
Heilind Electronics
$1.909
$1.606
$1.604
Mouser Electronics
$2.850
$2.180
$1.840
$1.800
DigiKey
$3.050
$2.133
$1.767
RS Americas
$3.150
$2.270
$1.760
RS (Exports)
$3.520
TTI
$1.520
$1.460
Farnell
$2.080
Powell Electronics
$1.870
$1.770
$1.730
Newark
$3.230
$2.560
Master Electronics
$2.500
$2.040
$1.920
Verical
$3.030
Chip1Stop
$2.760
$2.640
Digiode
$1.596
Nova Conductors
$2.100
Hutch & Son
$2.510
Bristol Electronics
$2.736
$1.286
$1.177
Vyrian
IBS Electronics
$3.015
$2.861
$2.805
VNN
Cyclops Electronics Ltd
Inventory MP
Semicontronic
$1.290
$1.258
$1.251
Corphita
$1.512
Continental Prestige Electronics
$2.058
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$4.735
Eastek
Authorized Procurement Solutions
Perfect Parts
Glotronic Ltd.
EMSNET (Excess)
Cyclops Electronics Ltd (Excess)
Assy Fe
This product is versatile and can be used for multiple types of connections, making it a convenient choice for various applications.
Having 2 contacts allows for a simple and straightforward connection process, reducing the chances of errors during installation.
The cable mounting type provides a secure and stable connection, ensuring reliability and durability in the long run.
Crimp termination ensures a strong and secure connection between the contacts and the cable, minimizing signal loss and interference.
Male connectors are commonly used in electronics and provide a reliable connection, making this product suitable for various applications.
The plug style body or shell allows for easy and quick connections, making this product user-friendly and convenient to use.
Combination Line Connectors 194190008 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mixed Contacts:
Mounting Type:
Option:
Termination Type:
Total No. of Contacts:
194190008 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Packaging - Mult Devs Packaging/Quantity 06/Apr/2022 Mult Devs Cancel Packaging 06/Apr/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Diodes Incorporated
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Frontier Electronics
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1318386-1
TE Connectivity
TE Connectivity 1318386-1 is a Combination Line Connector with dimensions of 0.827"x.78"x.622". It has 16 contacts, rated for 12V and operating temperatures from -30 to 105°C. Used in cable mounting applications, it features POLYBUTYLENE TEREPHTHALATE insulator material and UL certification.
54200409
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Insulator Material: POLYAMIDE; Mixed Contacts: NO;
DTM06-12SB-E003
TE Connectivity's DTM06-12SB-E003 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle up to 7.5A signal current. Ideal for applications requiring a polarized, crimp termination female connector with plug body style and strain relief mounting option.
15326842
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
2377780-2
TE Connectivity's 2377780-2 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It features 4 loaded rows, operating temperatures from -40 to 120°C, and cable mounting type. Ideal for applications requiring polarized connectors at 115/230VAC mains rating.
776437-1
TE Connectivity 776437-1 is a Combination Line Connector with dimensions 1.509"x1.449"x1.24". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 125°C. With 12 contacts, it's ideal for cable mounting applications requiring a polarized, crimped female connector with strain relief.
282107-1
TE Connectivity's 282107-1 is a Combination Line Connector with 0.236" pitch, rated for 24V and 14A signal current. Featuring glass-filled polyamide construction, it operates b/w -40 to 125°C. Ideal for commercial applications requiring durable, polarized connectors with male SQ pin-skt contacts.
AT06-12SC-OMGRN
Amphenol
The Amphenol AT06-12SC-OMGRN is a Combination Line Connector with 12 contacts, rated at 13A. It features GLASS FILLED POLYAMIDE66 insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug connector with round socket contact style.
DT06-6S-CE01
The TE Connectivity DT06-6S-CE01 is a Combination Line Connector with dimensions of 1.268" x 0.82" x 0.946". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector is ideal for applications requiring a polarized, female contact style with crimp termination.
AT06-12SA-SRGRY
The Amphenol AT06-12SA-SRGRY is a 12-contact combination line connector with 2 rows, rated for 13A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has dimensions of 1.772" x 0.827" x 1.713".
9-966140-5
TE Connectivity 9-966140-5 is a Combination Line Connector with dimensions of 1.024" x 0.791". Rated at 24V, it operates b/w -40 to 100°C. Ideal for applications requiring a male connector with 6 contacts and solder termination in a panel-mounted, right-angle configuration.
DTM04-2P-E007
TE Connectivity's DTM04-2P-E007 is a 2.005" x 0.651" x 0.638" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring UL 94V-0 flammability code, it has 2 contacts, polarized key, and male gender suitable for cable mounting applications at 7.5A signal current.
DT04-4P-RT01
The TE Connectivity DT04-4P-RT01 is a combination line connector with 4 contacts, rated at 250V and 13A. It features GLASS FILLED POLYAMIDE insulator material, UL94V-0 flammability code, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized male connector with crimp termination and strain relief option.
DTM06-12SC
TE Connectivity's DTM06-12SC is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. It has a rated voltage of 250V and can handle currents up to 7.5A. Ideal for applications requiring a polarized, UL-rated connector with strain relief mounting on cables.
DT15-6P-G003
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
DT04-3P-EP10
TE Connectivity's DT04-3P-EP10 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring crimp termination and UL flammability rating of 94V-0.
2-172034-1
Tyco Electronics Amp
2-172034-1 by Tyco Electronics Amp is a Combination Line Connector with POLYAMIDE insulator material. Featuring 11 contacts, it is a male connector for board mounting with solder termination. Ideal for various applications requiring reliable electrical connections in compact spaces.
30700-1207
Molex
The Molex 30700-1207 is a Combination Line Connector with dimensions of 1.208" x 0.928" x 1.243". It has 20 contacts, rated for 7A signal current, and operates b/w -40°C to 100°C. Ideal for board mounting applications requiring male SQ PIN-SKT contacts in SYNDIOTACTIC POLYSTYRENE insulator material.
DT06-12SA
TE Connectivity's DT06-12SA is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring UL certification and polarization key for secure connections.
2040278-2
2040278-2 by TE Connectivity is a Combination Line Connector with dimensions of 0.799" x 0.925" x 1.476". Rated for 250V, it operates b/w -40 to 125°C. This polarized connector has UL certification and is suitable for cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
194190012
Molex 194190012 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
194190015
Molex 194190015 is a COMBINATION LINE CONNECTOR with 10 contacts, suitable for CABLE mounting and CRIMP termination. Ideal for applications requiring MALE connectors in PLUG body style.
194180002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 8;
194190011
Molex 194190011 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
194180026
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 12;
19418-0005
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
194180030
Molex 194180030 is a COMBINATION LINE CONNECTOR with 16 contacts, FEMALE gender, RECEPTACLE body style. It uses CRIMP termination and CABLE mounting type. Ideal for various electronic applications requiring reliable connectivity.
194190021
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO; Mounting Type: CABLE;
194180029
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; IEC Conformity: NO; Mounting Type: CABLE;
194180001
Molex 194180001 is a Combination Line Connector with 0.22" pitch, 18A signal current rating, and -40 to 125°C operating temperature range. Ideal for commercial applications requiring a polarized housing, crimp termination, and UL94V-0 flammability rating.
19418-0007
Molex 19418-0007 is a COMBINATION LINE CONNECTOR with 2 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for various electronic applications requiring reliable connectivity.
194180014
Molex 194180014 is a COMBINATION LINE CONNECTOR with 10 FEMALE contacts for CABLE mounting. Features CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable connectivity.
194180020
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Manufacturer Series: 19418; Contact Material: NOT SPECIFIED;
194180027
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 12; DIN Conformance: NO;
19418-0004
Molex 19418-0004 is a COMBINATION LINE CONNECTOR with 4 contacts, FEMALE gender, and CABLE mounting. It uses CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable cable connections.
194180022
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG; Body Length: 1.332 inch;
194190007
The Molex 194190007 is a COMBINATION LINE CONNECTOR with 2 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for applications requiring reliable connection in various electronic devices.
194190005
The Molex 194190005 is a COMBINATION LINE CONNECTOR with 4 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for various applications requiring reliable connectivity in compact spaces.
194180038
Molex 194180038 is a COMBINATION LINE CONNECTOR with 12 contacts, FEMALE gender, and RECEPTACLE body style. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
194190001
Molex 194190001 is a male combination line connector with 8 contacts, offering 20MOhm insulation resistance and 2500VDC dielectric voltage. Ideal for commercial applications, it has a crimp termination type and operates b/w -40 to 125°C temperature range.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved