Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 194180001 is a Combination Line Connector with 0.22" pitch, 18A signal current rating, and -40 to 125°C operating temperature range. Ideal for commercial applications requiring a polarized housing, crimp termination, and UL94V-0 flammability rating.
Median Price
$6.270
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$5.651
100+ parts
$5.067
1k+ parts
$4.786
10k+ parts
-
Heilind Electronics
$6.078
$4.955
$4.880
TTI
$4.840
$4.530
DigiKey
$7.810
Mouser Electronics
$8.340
$6.610
$5.560
$4.870
Verical
$7.609
$7.229
$5.787
Powell Electronics
$4.890
$4.720
$4.290
TTI Europe
$6.826
Chip1Stop
$6.220
Nova Conductors
$4.808
Digiode
$5.774
TME
$10.720
$7.480
VNN
Sensible Micro Corp
$4.192
$3.896
Vyrian
IBS Electronics
$5.848
$5.638
$4.488
Goldney Electronics S.L.
Q Components
Continental Prestige Electronics
$4.711
Netroflash
Semicontronic
$5.170
$5.041
$5.015
Corphita
$5.470
Aztec Data Supply Inc.
$8.347
Perfect Parts
Argo Parts USA
Authorized Procurement Solutions
Eastek
Assy Fe
EMSNET (Excess)
The close proximity of mating contacts allows for efficient and reliable connections.
High insulation resistance ensures minimal leakage current, reducing the risk of electrical malfunctions or shorts.
With a high maximum operating temperature, this connector can withstand elevated temperatures without compromising performance.
This connector has a high signal current rating, making it suitable for applications requiring high current carrying capacity.
Supports small wire sizes, providing flexibility in wiring configurations.
Can be easily mounted on cables, offering convenient installation and maintenance.
Crimp termination provides a secure and reliable connection, reducing the risk of signal loss or disconnection.
Combination Line Connectors 194180001 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Contact Row Spacing (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Maximum Wire Size:
Minimum Wire Size:
Minimum Withdrawal Force (N):
194180001 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Cancel Location Change 11/Jul/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
Hitachi
SS14
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
Onsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
First Components International
Micro Commercial Components
Allegro MicroSystems
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
Jiangsu Jiejie Microelectronics
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
AT06-08SA-SR2BK
Amphenol
The Amphenol AT06-08SA-SR2BK is a 8-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operates b/w -55°C to 125°C, and features a plug body style. Ideal for cable mounting applications requiring reliable female contact pins in two rows.
DTP04-2P-E004
TE Connectivity
TE Connectivity's DTP04-2P-E004 is a Combination Line Connector with 200V rated voltage and 25A signal current. Featuring GLASS FILLED POLYAMIDE insulator, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this connector has a male contact gender and UL 94V-0 flammability rating.
154719
TE Connectivity 154719 is a Combination Line Connector with 0.96" body length, GLASS FILLED POLYAMIDE66 insulator, and -40 to 105 °C operating temperature range. It features UL 94V-2 flammability code, polarized key, and UL reference standard. Ideal for cable mounting applications at 115/230VAC mains connector rating.
15476346
Aptiv
COMBINATION LINE CONNECTOR;
12065287
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mixed Contacts: NO; DIN Conformance: NO;
2103124-2
TE Connectivity's 2103124-2 is a Combination Line Connector with EMI shielding, male contact gender, and 2 contacts. It has a body length of 1.78", width of 1.59", and depth of 1.224". This connector is ideal for applications requiring reliable commercial-grade connections in straight mounting configurations.
DT04-4P-CE02
TE Connectivity's DT04-4P-CE02 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it operates b/w -55 to 125 °C and handles up to 13A signal current. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
0-0282087-1
TE Connectivity 0-0282087-1 is a Combination Line Connector with dimensions 0.909"x.366"x1.268". Rated for 24V, it operates b/w -40°C to 125°C. With GLASS FILLED PA insulator, this POLARIZED connector has 3 contacts and is ideal for CABLE mounting applications.
DTP04-2P-C015
TE Connectivity's DTP04-2P-C015 is a combination line connector with dimensions of 1.861" x 0.872" x 0.848". It has a rated voltage of 200V and can operate b/w -55°C to 125°C. With UL certification, it offers 25A signal current capacity and features a male gender contact style for cable mounting applications.
12015024
Aptiv's 12015024 Combination Line Connector features a Mating Contact Pitch of 0.3", Body Length of 0.949", and Body Width of 0.978". With a rated current of 15A, it is ideal for cable mounting applications requiring a polarized housing and crimp termination. Operating temperatures range from -40°C to 125°C, making it suitable for commercial use in various industries.
ATM04-2P-P007
COMBINATION LINE CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
AT06-12SA-KIT01
The Amphenol AT06-12SA-KIT01 is a Combination Line Connector with 12 contacts, rated at 13A signal current. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and crimp termination.
1-1703498-1
TE Connectivity 1-1703498-1 is a Combination Line Connector with dimensions of 0.583" x 1.732" x 0.589". It has a rated voltage of 14V and can operate b/w -40°C to 130°C. With UL certification, it features male SQ PIN-SKT contacts for signal currents up to 25A in cable mounting applications.
AT04-3P-SR01BLK
The Amphenol AT04-3P-SR01BLK is a combination line connector with 3 contacts, rated at 13A. It features a body size of 0.961" x 0.827" x 2.177", made of polyethylene for durability. Ideal for applications requiring a female receptacle contact style, with operating temperatures ranging from -55°C to 125°C.
DTM13-12PA-12PB-GR01
TE Connectivity's DTM13-12PA-12PB-GR01 is a Combination Line Connector with dimensions 1.453" x 3.976" x 1.453". It has a rated voltage of 250V, operates b/w -55°C to 125°C, and supports up to 24 contacts. Ideal for board mounting applications requiring a male contact gender and right-angle mounting style at a max current of 7.5A.
DT04-08PA-L012
TE Connectivity's DT04-08PA-L012 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A signal current, it operates b/w -55 to 125°C. Ideal for panel mounting applications requiring a polarized male receptacle with crimp termination.
15300003
Aptiv's 15300003 is a Combination Line Connector with POLYAMIDE66 insulator. It has 3 male contacts for cable mounting and crimp termination. Ideal for automotive applications requiring reliable electrical connections.
737021
TE Connectivity 737021 is a Combination Line Connector with POLYAMIDE insulator. It has 4 contacts, male gender, and operates b/w -40 to 105°C. Suitable for applications requiring a cable-mounted connector with a terminal pitch of 10.79mm at mains ratings of 115/230VAC.
AT06-2S-SR01BLK
The Amphenol AT06-2S-SR01BLK is a combination line connector with 2 contacts, rated for 13A signal current. It features a POLYETHYLENE insulator and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets.
DT04-3P-EP10
TE Connectivity's DT04-3P-EP10 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring crimp termination and UL flammability rating of 94V-0.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
194190012
Molex
Molex 194190012 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
194190015
Molex 194190015 is a COMBINATION LINE CONNECTOR with 10 contacts, suitable for CABLE mounting and CRIMP termination. Ideal for applications requiring MALE connectors in PLUG body style.
194180002
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 8;
194190011
Molex 194190011 is a COMBINATION LINE CONNECTOR with 6 contacts, MALE gender, and PLUG body style. It uses CRIMP termination on CABLE mounting. Ideal for automotive and industrial applications requiring reliable connectivity.
194180026
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Body or Shell Style: RECEPTACLE; Total No. of Contacts: 12;
19418-0005
Molex 19418-0005 is a COMBINATION LINE CONNECTOR with 4 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for automotive, industrial, and consumer electronics applications.
194180030
Molex 194180030 is a COMBINATION LINE CONNECTOR with 16 contacts, FEMALE gender, RECEPTACLE body style. It uses CRIMP termination and CABLE mounting type. Ideal for various electronic applications requiring reliable connectivity.
194190021
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Mixed Contacts: NO; Mounting Type: CABLE;
194180029
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Termination Type: CRIMP; IEC Conformity: NO; Mounting Type: CABLE;
19418-0007
Molex 19418-0007 is a COMBINATION LINE CONNECTOR with 2 FEMALE contacts for CABLE mounting. It features CRIMP termination and RECEPTACLE body style. Ideal for various electronic applications requiring reliable connectivity.
194180014
Molex 194180014 is a COMBINATION LINE CONNECTOR with 10 FEMALE contacts for CABLE mounting. Features CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable connectivity.
194180020
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 6; Manufacturer Series: 19418; Contact Material: NOT SPECIFIED;
194180027
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: NO; Total No. of Contacts: 12; DIN Conformance: NO;
19418-0004
Molex 19418-0004 is a COMBINATION LINE CONNECTOR with 4 contacts, FEMALE gender, and CABLE mounting. It uses CRIMP termination and RECEPTACLE body style. Ideal for automotive and industrial applications requiring reliable cable connections.
194180022
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Maximum Wire Size: 18 AWG; Body Length: 1.332 inch;
194190007
The Molex 194190007 is a COMBINATION LINE CONNECTOR with 2 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for applications requiring reliable connection in various electronic devices.
194190008
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Body or Shell Style: PLUG; Mounting Type: CABLE;
194190005
The Molex 194190005 is a COMBINATION LINE CONNECTOR with 4 contacts, suitable for CABLE mounting and CRIMP termination. It features a MALE contact gender and PLUG body style. Ideal for various applications requiring reliable connectivity in compact spaces.
194180038
Molex 194180038 is a COMBINATION LINE CONNECTOR with 12 contacts, FEMALE gender, and RECEPTACLE body style. It uses CRIMP termination on CABLE mounting. Ideal for industrial machinery and automotive applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved