Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 93444-6121 is a Combination Line Connector with dimensions 1.608" x 0.873" x 2.131". It has 12 contacts, glass-filled polyamide insulator, and male crimp termination. Ideal for cable mounting applications requiring a receptacle connector with round pin/socket contact style.
Median Price
$2.336
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$2.281
100+ parts
$2.000
1k+ parts
$1.857
10k+ parts
-
Heilind Electronics
$2.453
$2.064
$1.970
Adafruit Industries
$2.458
Newark
$2.970
$2.600
Master Electronics
$2.100
$1.930
$1.790
PEI Genesis
Verical
$2.240
DigiKey
$2.390
Chip1Stop
$2.520
Farnell
$1.900
$1.860
Powell Electronics
$2.250
Digiode
$0.744
TestEquity
Nova Conductors
$2.410
VNN
Vyrian
IBS Electronics
$2.237
TME
$2.840
$2.560
Cyclops Electronics Ltd
Semicontronic
$0.670
$0.653
$0.650
Corphita
$0.705
Continental Prestige Electronics
$2.362
Argo Parts USA
Andel Nordic
$7.000
$4.900
Aztec Data Supply Inc.
$9.080
Authorized Procurement Solutions
Netroflash
$2.290
$2.241
Perfect Parts
Resion (Excess)
Assy Fe
The compact body length allows for easy installation and space-efficient design.
The narrow body width contributes to the overall sleek appearance and efficient use of space.
The ample body depth accommodates multiple rows of contacts, making it suitable for applications requiring numerous connections.
The use of glass-filled polyamide as the insulator material enhances durability and resistance to heat, making the connector suitable for various environmental conditions.
Having two rows loaded with contacts allows for greater connection possibilities, making it versatile for different configurations.
The connector type signifies its ability to handle multiple types of lines, providing flexibility in connectivity options.
The substantial number of contacts allows for a wide range of connections to be made, suitable for complex systems or devices.
The cable mounting type offers a secure and reliable connection method, particularly for applications where frequent plugging and unplugging are required.
The specified mating info ensures compatibility with other connectors or devices, facilitating seamless integration into existing systems.
The crimp termination type allows for a strong and durable connection between the connector and cables, reducing the risk of signal interference or loss.
The male contact gender is commonly used for providing power or signals, offering reliable performance in various applications.
The receptacle style of the body or shell provides a secure housing for the contacts, ensuring proper alignment and protection against external elements.
The round pin and socket contact style offers a versatile and reliable connection method, suitable for various signal or power transmission requirements.
Combination Line Connectors 93444-6121 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
93444-6121 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Tak Cheong Electronics Holdings
33481-0301
Molex
Molex 33481-0301 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, this connector features polarized housing, UL reference standard compliance, and male gender with blade pin-skt contact style.
DT04-2P-C015
TE Connectivity
TE Connectivity's DT04-2P-C015 is a 1.708" x 0.675" x 0.67" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It has UL 94V-0 flammability code, polarized key, and supports 13A signal current. Ideal for cable mounting applications requiring male crimp termination with strain relief.
368545-1
TE Connectivity 368545-1 is a Combination Line Connector with GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator. It has 2 contacts, polarized key, and is designed for cable mounting applications. The connector measures 0.457" x 0.622" x 1.217" and supports 115/230VAC mains rating.
AT06-6S-SR02BLK
Amphenol's AT06-6S-SR02BLK is a 2-row combination line connector with 6 contacts, rated at 13A. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this plug-type connector is commonly used in various electronic systems.
776163-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: BRASS; IEC Conformity: NO; Mounting Type: BOARD AND PANEL;
2-1971775-3
TE Connectivity 2-1971775-3 is a Combination Line Connector with dimensions of 1.083" x 0.907" x 0.907". Rated for 600V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -55 to 105 °C. Ideal for applications requiring a male SQ PIN-SKT contact style, such as panel mounting in UL-standardized systems.
AT06-3S-RJ120BK
Amphenol's AT06-3S-RJ120BK is a 3-contact combination line connector with polyethylene insulator. It operates b/w -55°C to 125°C, suitable for cable mounting applications. Featuring a compact body size of 0.744" x 0.665" x 1.248", it is ideal for various electronic systems requiring reliable female contact connections.
1376352-1
TE Connectivity's 1376352-1 is a Combination Line Connector with dimensions of 0.827" x 0.433" x 0.622". Rated for 12V, it has 8 contacts and operates b/w -30 to 105°C. Used in cable mounting applications, it features UL-approved materials and polarization for safety.
174057-2
TE Connectivity's 174057-2 is a Combination Line Connector with dimensions of 1.114" x 0.374" x 0.425". Rated for 12V, it uses POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -30 to 105°C. Ideal for cable mounting applications, it features a polarized design with 2 contacts and male gender.
5-1718321-3
TE Connectivity 5-1718321-3 is a Combination Line Connector with dimensions 4.744" x 1.811" x 1.732". Rated for 36V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 120°C. Ideal for applications requiring a polarized, UL-rated connector with 39 contacts and a current rating of 40A.
1-480318-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Total No. of Contacts: 2;
DT06-2S-CE01
The TE Connectivity DT06-2S-CE01 is a Combination Line Connector with dimensions of 1.228" x 0.591" x 0.621". It has a rated voltage of 250V, UL flammability code of 94V-0, and can handle up to 13A signal current. Ideal for cable mounting applications requiring a polarized, female contact style connector with crimp termination.
12047663
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: 1.299 inch;
DT04-12PA-L012
TE Connectivity's DT04-12PA-L012 is a 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized male receptacle with strain relief mounting on panels.
AT04-3P-RD01
The Amphenol AT04-3P-RD01 is a male receptacle combination line connector with 3 contacts. It has a max operating temperature of 125°C and rated current of 13A. Ideal for cable mounting applications requiring reliable signal transmission in harsh environments.
1-480706-0
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mixed Contacts: NO; Insulator Material: POLYAMIDE; Manufacturer Series: 480706;
DTP06-4S-E004
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.063 inch; Minimum Operating Temperature: -55 Cel;
PL282X-301-70
The Amphenol PL282X-301-70 is a RECTANGULAR POWER CONNECTOR with 2 contacts, ideal for CABLE mounting. It has a compact body size of 2.776" x 4.067" x 2.602", operating b/w -40°C to 125°C. This FEMALE connector with CRIMP termination suits various industrial applications.
54201412
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body Width: .882 inch; Total No. of Contacts: 14;
DT06-6S-CE06
TE Connectivity's DT06-6S-CE06 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized, UL-rated connector with strain relief option.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
934451101
TE Connectivity's 934451101 is a Combination Line Connector with max operating temp of 125°C and min of -55°C. Featuring a polarized connector type, it has a terminal pitch of 5.5mm and is suitable for mains connector rating of 115/230VAC in cable mounting applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body or Shell Style: PLUG; Filter Feature: NO;
934441201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; MIL Conformity: NO; No. of Rows Loaded: 1; Mains Connector Rating: 115/230VAC;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
934454202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Mains Connector Rating: 115/230VAC; DIN Conformance: NO; Empty Shell: YES;
934454501
TE Connectivity's 934454501 is a combination line connector with 2 loaded rows and a max operating temperature of 125°C. It has a min operating temperature of -55°C and is suitable for cable mounting applications.
934453102
TE Connectivity 934453102 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for 115/230VAC mains connectors. Featuring a polarized design, it has a terminal pitch of 4.5mm and plug body style, ideal for cable mounting applications.
934446121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; No. of Rows Loaded: 2; Empty Shell: YES; IEC Conformity: NO; No. of Ports: 1;
934453501
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Mains Connector Rating: 115/230VAC; MIL Conformity: NO; Body or Shell Style: PLUG; Mounting Type: CABLE;
934442101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Empty Shell: YES; Panel Mount: NO; Maximum Operating Temperature (Cel): 125;
93444-2101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Mixed Contacts: NO; Body Width: .833 inch;
934453202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Maximum Operating Temperature (Cel): 125; EMI Shielded: NO; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO;
93445-2501
Molex 93445-2501 is a rectangular power connector with 3 contacts, made of glass-filled polyamide. It has a body size of 0.74" x 0.74" x 1.827", suitable for cable mounting with crimp termination. Ideal for applications requiring male contact gender and plug shell style like industrial machinery control systems.
934452501
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Panel Mount: NO; Filter Feature: NO; Polarization Key: POLARIZED; Body or Shell Style: PLUG;
934453101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Panel Mount: NO; MIL Conformity: NO; IEC Conformity: NO; Terminal Pitch (mm): 4.5;
934444101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Polarization Key: POLARIZED; Mains Connector Rating: 115/230VAC;
93444-4101
Molex 93444-4101 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 6 contacts in 3 rows, suitable for cable mounting. The connector is a 0.97" x 0.817" x 1.878" receptacle used with multiple mating parts for various applications.
93444-1101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.799 inch; Mounting Type: CABLE; Body or Shell Style: RECEPTACLE;
934441101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
93444-6112
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: RECEPTACLE; Termination Contact Finish: NOT APPLICABLE; Filter Feature: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved