Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TE Connectivity 776437-1 is a Combination Line Connector with dimensions 1.509"x1.449"x1.24". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 125°C. With 12 contacts, it's ideal for cable mounting applications requiring a polarized, crimped female connector with strain relief.
Median Price
$3.744
Lifecycle Status
Suppliers In-Stock
33
In-Stock Inventory
1k+
RS Americas
1+ parts
$2.000
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$2.240
$2.160
$2.150
$1.890
Arrow
$3.047
$2.628
TE Connectivity
$4.760
$3.570
$2.850
Mouser Electronics
$4.820
$3.160
$2.890
$2.580
RS (Exports)
$5.210
$4.250
$4.010
Newark
$5.530
$3.890
$3.700
Element14
$7.120
Powell Electronics
$10.094
$6.423
$5.781
TTI
$2.350
$2.290
$2.220
Future Electronics
$2.330
$2.230
Master Electronics
$3.440
$2.770
$1.910
Verical
$4.047
$3.753
TTI Europe
$2.614
$2.484
Power & Signal
Farnell
$5.510
DigiKey
Interstate Connecting
$2.541
Distrelec
Boersig
Digiode
$1.900
Nova Conductors
VNN
IBS Electronics
$4.754
$4.137
Electro Sonic
$3.310
$2.880
$2.270
NAC Semi
$2.900
TME
$4.150
$3.880
Vyrian
Rapid Electronics
Connect4Technologies Inc.
LIBRA Elektronik GmbH
EMSNET
Elcom Components
Semicontronic
$1.700
$1.658
$1.649
Corphita
$1.800
Argo Parts USA
Aztec Data Supply Inc.
$3.063
Continental Prestige Electronics
$4.410
$2.480
Advanced Electronics
$6.381
$6.062
Authorized Procurement Solutions
Perfect Parts
Glotronic Ltd.
Eastek
GreenTree Electronics
Assy Fe
Abacus Technologies
Netroflash
$2.715
$2.631
$2.576
The compact size of the body allows for easy installation and saves space in tight areas.
The high rated voltage ensures safe and reliable operation, suitable for a wide range of applications.
The high-quality insulator material provides excellent durability and protection against electrical conductivity.
With a sufficient number of contacts, this connector can handle multiple signals or power connections efficiently.
The cable mounting type offers versatility in installation and compatibility with various cable types.
The round pin and socket contact style ensures a secure and reliable connection between components.
Combination Line Connectors 776437-1 attributes and parameters. Explore more Combination Line Connectors devices from TE Connectivity
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
DIN Conformance:
EMI Shielded:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mains Connector Rating:
Mating Contact Row Spacing (inch):
Mixed Contacts:
Mounting Option-2:
Mounting Type:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Polarization Key:
Rated Current - Signal:
Rated Voltage:
Reference Standard:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
776437-1 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 776yyy-y Wire Exit Hole 24/Jan/2014 Mult Devs - material chg 01/JUN/2021
PCN Assembly/Origin - 776yyy-y - tooling capacity 21/MAY/2021
TE Connectivity is a global leader in the design and production of innovative connectors and sensors for multiple industries, such as automotive, industrial equipment, data communication systems, aerospace, defense, medical, oil and gas, consumer electronics and energy. It is an American-Swiss domiciled firm that has been providing high-quality products to its customers since 1907.
CEO
Terrence R. Curtin
Executive VP, CFO
Heath A. Mitts
Senior VP, Principal Accounting Officer
Robert J. Ott
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
National Semiconductor
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
32006-A22
Eaton Corporation
Eaton Corporation's 32006-A22 is a Combination Line Connector with dimensions of 1.571" x 1.035" x 1.213". It features 8 contacts in a 2-row configuration, suitable for cable mounting applications. This male connector is ideal for various electronic and electrical systems requiring reliable connections.
AT04-4P-RD01
Amphenol
Amphenol's AT04-4P-RD01 is a male combination line connector with 4 contacts, rated for 13A signal current. With dimensions of 0.826" x 0.771" x 1.811", it features a polyethylene body and shell, suitable for cable mounting applications in various industries.
12129615
Aptiv
Aptiv's 12129615 is a Combination Line Connector with Mating Contact Pitch of 0.236", Body Length of 1.142", and Insulator Material POLYAMIDE66. It has a Rated Current of 15A, suitable for applications requiring a Polarized Housing and operating temperatures from -40 to 125°C. The connector features a total of 3 contacts, male contact gender, and crimp termination type for reliable commercial use in cable mounting setups.
AT04-2P-SR02BLK
The Amphenol AT04-2P-SR02BLK is a combination line connector with 2 contacts, rated for 13A signal current. Its compact dimensions of 0.673" x 0.669" x 2.193" make it suitable for cable mounting applications. With an operating temperature range of -55°C to 125°C, this connector features a male contact gender and receptacle body style.
DT06-3S-CE06
TE Connectivity's DT06-3S-CE06 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulation. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and plug body style.
12010996
Aptiv's 12010996 is a Combination Line Connector with POLYAMIDE66 insulator. It features crimp termination, male contact gender, and cable mounting type. Ideal for applications requiring reliable connections in automotive wiring systems.
929504-4
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mixed Contacts: NO;
1-180916-0
The Tyco Electronics Amp 1-180916-0 is a Combination Line Connector with Polycarbonate insulator material, UL Flammability Code 94V-0. It features a male contact gender and cable mounting type, suitable for various applications requiring reliable electrical connections in industrial settings.
33481-0301
Molex 33481-0301 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, this connector features polarized housing, UL reference standard compliance, and male gender with blade pin-skt contact style.
DT06-08SA-CE01
TE Connectivity's DT06-08SA-CE01 is a 2-row, 8-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for applications requiring a polarized, UL-certified connector with strain relief mounting on cables.
DT06-4S-CE01
TE Connectivity's DT06-4S-CE01 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
ATM15-08PA-BM03
The Amphenol ATM15-08PA-BM03 is a Combination Line Connector with 8 contacts, rated at 7.5A signal current. It has a body size of 2.071" x 1.303" x 1.189", made of POLYETHYLENE for -55 to 125°C applications. Ideal for board and panel mounting, featuring male contact gender with round pin sockets for various electronic connections.
DT06-8S
TE Connectivity's DT06-8S is a 8-contact combination line connector with nickel finish. It features polyethylene insulator, crimp termination, and female contact gender. Ideal for cable mounting applications, specifically designed as a plug connector.
12047663
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Body Depth: 1.299 inch;
54201016
Aptiv's 54201016 is a Combination Line Connector with dimensions of 1.187" x 0.563" x 1.106". It features POLYAMIDE insulator material, 2 loaded rows, and 10 male contacts. Ideal for automotive applications requiring reliable electrical connections in tight spaces.
DTM04-12PA-EE04
TE Connectivity's DTM04-12PA-EE04 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 7.5A signal current. With dimensions of 1.72" x 0.796" x 1.575", it operates b/w -55°C to 150°C, making it ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
2-2141227-2
TE Connectivity's 2-2141227-2 is a EMI shielded combination line connector with rated current of 45A. It operates b/w -40 to 140°C, featuring solder termination and male contact gender. Ideal for panel mounting applications with terminal pitch of 11.5mm and straight mounting style.
AT04-12PA
The Amphenol AT04-12PA is a 2-row combination line connector with 12 contacts, rated for 13A signal current. It features polyethylene insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT04-12SA connectors using crimp termination.
DT15-12PA
TE Connectivity's DT15-12PA is a 2-row combination line connector with GLASS FILLED POLYAMIDE46 insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, suitable for panel mounting applications. The connector features a straight shell style with RND PIN-SKT contact gender, ideal for signal connections in various industries.
1-1534127-1
TE Connectivity 1-1534127-1 is a Combination Line Connector with dimensions 2.724" x 1.72" x 1.492". Rated for 28V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 120°C. With UL certification, it features 21 contacts, rated at 40A for cable mounting applications with strain relief.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
776428-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Voltage: 250 V; Polarization Key: POLARIZED; Body Length: .772 inch;
776487-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body Width: 1.445 inch; Terminal Pitch (mm): 5.3;
776433-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: 1.441 inch; Mixed Contacts: NO; Body or Shell Style: PLUG;
776430-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: .754 inch; MIL Conformity: NO; Insulator Material: GLASS FILLED POLYBUTYLENE TEREPHTHALATE;
776429-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Terminal Pitch (mm): 4.5; Rated Voltage: 250 V; Panel Mount: NO;
776495-1
TE Connectivity's 776495-1 is a Combination Line Connector with dimensions of 1.126" x 1.872" x 1.049". Rated for 250V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material and operates b/w -40 to 125°C. Ideal for applications requiring a polarized connector with UL certification and male contact gender.
776488-1
TE Connectivity's 776488-1 is a Combination Line Connector with dimensions of 0.969" x 1.872" x 0.884". It has a rated voltage of 250V, UL Flammability Code of 94-HB, and can handle temperatures from -40 to 125°C. Ideal for applications requiring a male RND PIN-SKT contact style with a total of 4 contacts.
776438-1
TE Connectivity's 776438-1 is a Combination Line Connector with dimensions of 1.48"x1.872"x1.049". It has a rated voltage of 250V, UL Flammability Code 94-HB, and can handle up to 13A signal current. Ideal for applications requiring male contacts, polarized keying, and cable mounting with strain relief.
776428-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; DIN Conformance: NO; Panel Mount: NO;
776437-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Minimum Operating Temperature: -40 Cel; Rated Current - Signal: 13 A;
776494-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mains Connector Rating: 13A; Body Width: 1.449 inch; DIN Conformance: NO;
776429-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Depth: .925 inch; Body Width: 1.449 inch; EMI Shielded: NO;
776430-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 4.5; Mixed Contacts: NO; EMI Shielded: NO;
776430-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Total No. of Contacts: 3; Empty Shell: YES;
776434-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; Terminal Pitch (mm): 4.5; Panel Mount: NO;
776434-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Rated Voltage: 250 V; Mounting Option-2: W/STRAIN RELIEF;
776438-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.049 inch; Body Width: 1.872 inch; Panel Mount: NO;
776433-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: 1.441 inch; DIN Conformance: NO; Mounting Option-2: W/STRAIN RELIEF;
776438-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.049 inch; Filter Feature: NO; Panel Mount: NO;
776438-4
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: NOT APPLICABLE; Mounting Type: CABLE; Panel Mount: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved