Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 93444-2101 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 3 contacts, female gender, and receptacle body style. Ideal for cable mounting applications with dimensions of 0.974" L x 0.833" W x 1.898" D.
Median Price
$1.540
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.500
100+ parts
$1.082
1k+ parts
$1.014
10k+ parts
-
Element14
$1.580
$1.046
$1.031
Verical
$1.700
$1.630
Newark
$1.870
PEI Genesis
Chip1Stop
$0.659
$0.558
Powell Electronics
$0.590
$0.530
Farnell
$0.715
Master Electronics
$1.650
$1.520
$1.410
TestEquity
$0.630
Nova Conductors
$0.895
Digiode
$1.501
VNN
Vyrian
Sensible Micro Corp
$0.535
$0.498
TME
$2.230
$1.940
IBS Electronics
$1.632
$1.560
Semicontronic
$0.493
$0.481
$0.478
Argo Parts USA
Continental Prestige Electronics
$0.877
Aztec Data Supply Inc.
$1.015
Corphita
$1.422
Andel Nordic
$3.176
$3.049
Perfect Parts
Authorized Procurement Solutions
Assy Fe
Resion (Excess)
Netroflash
$0.850
$0.832
EMSNET (Excess)
The compact body length of 0.974 inch makes this combination line connector suitable for applications where space is limited.
The small body width of 0.833 inch allows for easy installation in tight spaces or crowded electrical panels.
The adequate body depth of 1.898 inch ensures sufficient room for proper connection and contact between the connectors.
The use of glass filled polyamide as insulator material provides excellent electrical insulation properties, ensuring a reliable and durable connection.
Being a combination line connector, this product offers versatility by allowing multiple connections in a single unit, simplifying wiring configurations.
With 3 contacts available, this combination line connector can accommodate multiple connections or circuits, making it suitable for various applications.
The cable mounting type offers flexibility in installation, allowing for easy connection to cables without the need for additional hardware.
The availability of multiple mating parts ensures compatibility and interchangeability with a range of connectors, offering customization options for different setups.
The female contact gender allows for secure mating with male connectors, providing a reliable and robust connection for electrical circuits.
The receptacle body style offers a protective housing for the contacts, enhancing safety and preventing accidental contact with live electrical components.
Combination Line Connectors 93444-2101 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Empty Shell:
Filter Feature:
Insulator Material:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Total No. of Contacts:
93444-2101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Obsolescence/ EOL - Multiple Devices 04/Dec/2019
PCN Design/Specification - Multiple Devices Product Improvement 25/Apr/2017
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
ABS25-32.768KHZ-T
Abracon
Abracon's ABS25-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 122% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency, such as IoT devices and precision timing systems in industrial settings.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
BAV99
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
Yageo
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
Sangdest Microelectronics (Nanjing)
Frontier Electronics
Hy Electronic
10763414
Aptiv
COMBINATION LINE CONNECTOR;
154719-2
TE Connectivity
TE Connectivity's 154719-2 is a Combination Line Connector with GLASS FILLED POLYAMIDE66 insulator. It operates b/w -40 to 105 °C, UL certified with 94V-2 flammability code. Ideal for cable mounting applications at 115/230VAC mains connector rating.
12162280
Aptiv's 12162280 is a Combination Line Connector with dimensions of 0.838" x 0.767" x 1.066". Featuring 3 male contacts in RND PIN-SKT style, it is ideal for automotive applications.
DT06-4S-CE01
TE Connectivity's DT06-4S-CE01 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
776231-1
TE Connectivity's 776231-1 is a Combination Line Connector with Mating Contact Pitch of 0.157", Insulation Resistance of 100MΩ, and Operating Temperature range from -40°C to 105°C. Ideal for board mounting applications, this connector features a total of 35 contacts in a polarized housing design.
DT15-12PA-B016
TE Connectivity's DT15-12PA-B016 is a 2-row combination line connector with 250V rated voltage and 13A signal current. With a body length of 1.555" and width of 2.331", it operates b/w -55°C to 125°C, suitable for panel mounting applications requiring solder termination in male receptacle style connectors.
DTM06-4S-E007
TE Connectivity's DTM06-4S-E007 is a 1.57" x 0.694" x 0.685" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 4 contacts, UL certification, and a 7.5A signal current rating, it is ideal for cable mounting applications requiring polarized female connectors with strain relief.
12052641
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Termination Type: CRIMP; Body Width: .732 inch;
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DTM06-2S-EP10
TE Connectivity's DTM06-2S-EP10 is a 1.145" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. It features 2 contacts, UL94V-0 flammability code, and a polarization key. Ideal for applications requiring a polarized, crimped female connector with strain relief on cables.
54201411
Fci
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; MIL Conformity: NO; Total No. of Contacts: 14;
AT06-12SC-SR2GN
Amphenol
The Amphenol AT06-12SC-SR2GN is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating temperature range from -55 to 125°C, and features female contact gender. Ideal for cable mounting applications requiring a compact plug design with two loaded rows.
AT06-2S-YEL
Amphenol's AT06-2S-YEL is a combination line connector with 2 contacts, rated at 13A. Featuring a body size of 0.713" x 0.591" x 1.126", it uses crimp termination and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring female contact gender and round pin/socket style connections.
ATP04-4P
The Amphenol ATP04-4P is a Combination Line Connector with 4 contacts, rated for 25A signal current. It features POLYETHYLENE insulator material and operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a male contact gender and round pin/socket style.
5601230400
Molex
The Molex 5601230400 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It operates b/w -40 to 120°C, has 4 contacts, and uses solder termination. Ideal for board mounting applications with multiple mating parts available.
AT04-4P-SR01BLK
The Amphenol AT04-4P-SR01BLK is a male receptacle combination line connector with 4 contacts, rated for 13A signal current. It has a body size of 0.827" x 0.772" x 2.299", made of polyethylene, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring reliable signal connections in harsh environments.
AT04-3P-PM11
The Amphenol AT04-3P-PM11 is a male combination line connector with 3 contacts, rated at 13A. It has a body size of 2.19" x 1.46" x 0.673", made of polyethylene for use in cable and panel mounting applications. Operating temperatures range from -55°C to 125°C, suitable for various industrial environments.
AT06-12SC-MM01
The Amphenol AT06-12SC-MM01 is a 2-row combination line connector with 12 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector features round pin-socket contact style.
1718490-2
TE Connectivity's 1718490-2 is a Combination Line Connector with dimensions of 1.465" x 0.925" x 0.165". Rated for 36V, it operates b/w -40°C to 120°C. With UL certification, this connector has 9 contacts and is ideal for cable mounting applications.
DT06-2S-E004
TE Connectivity's DT06-2S-E004 is a 1.118" x 0.591" x 0.621" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation. Rated at 250V and 13A, it features a polarized design, UL certification, and crimp termination for cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
934451101
TE Connectivity's 934451101 is a Combination Line Connector with max operating temp of 125°C and min of -55°C. Featuring a polarized connector type, it has a terminal pitch of 5.5mm and is suitable for mains connector rating of 115/230VAC in cable mounting applications.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body or Shell Style: PLUG; Filter Feature: NO;
934441201
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; MIL Conformity: NO; No. of Rows Loaded: 1; Mains Connector Rating: 115/230VAC;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 1; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
934454202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Material: NOT SPECIFIED; Mains Connector Rating: 115/230VAC; DIN Conformance: NO; Empty Shell: YES;
934454501
TE Connectivity's 934454501 is a combination line connector with 2 loaded rows and a max operating temperature of 125°C. It has a min operating temperature of -55°C and is suitable for cable mounting applications.
934453102
TE Connectivity 934453102 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for 115/230VAC mains connectors. Featuring a polarized design, it has a terminal pitch of 4.5mm and plug body style, ideal for cable mounting applications.
934446121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; No. of Rows Loaded: 2; Empty Shell: YES; IEC Conformity: NO; No. of Ports: 1;
93444-6121
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE; Mating Info.: 93445-6121; No. of Rows Loaded: 2;
934453501
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Mains Connector Rating: 115/230VAC; MIL Conformity: NO; Body or Shell Style: PLUG; Mounting Type: CABLE;
934442101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; Empty Shell: YES; Panel Mount: NO; Maximum Operating Temperature (Cel): 125;
934453202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Maximum Operating Temperature (Cel): 125; EMI Shielded: NO; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO;
93445-2501
Molex 93445-2501 is a rectangular power connector with 3 contacts, made of glass-filled polyamide. It has a body size of 0.74" x 0.74" x 1.827", suitable for cable mounting with crimp termination. Ideal for applications requiring male contact gender and plug shell style like industrial machinery control systems.
934452501
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Panel Mount: NO; Filter Feature: NO; Polarization Key: POLARIZED; Body or Shell Style: PLUG;
934453101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Panel Mount: NO; MIL Conformity: NO; IEC Conformity: NO; Terminal Pitch (mm): 4.5;
934444101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mating Contact Finish: NOT SPECIFIED; Polarization Key: POLARIZED; Mains Connector Rating: 115/230VAC;
93444-4101
Molex 93444-4101 is a Combination Line Connector with GLASS FILLED POLYAMIDE insulator. It has 6 contacts in 3 rows, suitable for cable mounting. The connector is a 0.97" x 0.817" x 1.878" receptacle used with multiple mating parts for various applications.
93444-1101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Depth: 1.799 inch; Mounting Type: CABLE; Body or Shell Style: RECEPTACLE;
934441101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; DIN Conformance: NO; Mounting Type: CABLE; Contact Material: NOT SPECIFIED; IEC Conformity: NO;
93444-2102
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mating Info.: MULTIPAL MATING PARTS AVAILABLE; Body Width: .833 inch;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved