Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Filter Feature: NO; Mating Contact Finish: NOT SPECIFIED;
Median Price
$1.385
Lifecycle Status
Suppliers In-Stock
37
In-Stock Inventory
1k+
Newark
1+ parts
$0.832
100+ parts
1k+ parts
10k+ parts
Arrow
$1.172
$0.882
$0.837
$0.827
Verical
$1.340
-
$1.100
Farnell
$1.430
$1.040
$0.808
$0.792
RS (Exports)
$1.803
$1.333
Mouser Electronics
$1.910
$1.370
$1.070
$0.995
DigiKey
$1.376
$1.188
$1.077
Element14
$2.360
$1.940
$1.810
$1.500
Powell Electronics
$3.744
$2.620
Boersig
Master Electronics
$1.323
$1.005
$0.944
TTI Europe
$0.965
$0.857
$0.770
PEI Genesis
Chip1Stop
$1.060
$0.984
TE Connectivity
$1.870
$0.750
TTI
$1.080
$1.030
$0.970
Distrelec
Greenchips
$0.755
$0.721
$0.668
Digiode
$0.864
Nova Conductors
$1.064
TME
$1.440
$1.170
$0.960
Maritex
$2.101
$1.322
$1.057
Rapid Electronics
IBS Electronics
$1.129
$1.346
$1.311
NAC Semi
$1.360
$1.260
Bristol Electronics
Vyrian
VNN
Q Components
Pegasus Components GmbH
SIE Connect GmbH - GreenChips
Electro Sonic
$1.520
$1.140
ACDS - Activité Composants Distribution Service
LIBRA Elektronik GmbH
Famous Connections Ltd
ABC Electronics Ltd.
Cyclops Electronics Ltd
Semicontronic
$0.731
$0.728
Ampacity Inc.
Corphita
$0.819
Continental Prestige Electronics
$1.043
Argo Parts USA
Modulus Dynamics
$3.202
Aztec Data Supply Inc.
$7.390
Perfect Parts
Assy Fe
Glotronic Ltd.
GreenTree Electronics
Kepictronics
ErreBi Group
Robosynatics
$9.942
$9.739
Lucentia Tech
Authorized Procurement Solutions
EMSNET (Excess)
Eastek
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
$1.736
Combination Line Connectors 929505-2 attributes and parameters. Explore more Combination Line Connectors devices from Tyco Electronics Amp
Additional Features:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
MIL Conformity:
Manufacturer Series:
Mating Info.:
Mixed Contacts:
Mounting Type:
Option:
Total No. of Contacts:
929505-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
MBR0520LT1
Motorola
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LM78L05ACMX/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Cheng-yi Electronic
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
CDSOT23-SM712
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
32006-TP2
Eaton Corporation
The Eaton Corporation 32006-TP2 is a Combination Line Connector with dimensions of 1.571" x 1.035" x 1.213". It features 8 contacts in a male gender configuration, suitable for cable mounting applications with two loaded rows. Ideal for compact electronic devices requiring reliable connectivity.
967631-1
TE Connectivity's 967631-1 is a Combination Line Connector with dimensions of 0.885" x 1.082" x 1.318". It features 9 contacts, operates b/w -40°C to 140°C, and supports mains connector rating of 115/230VAC. Ideal for board mounting applications requiring male contact gender in a three-row configuration.
184042-1
TE Connectivity's 184042-1 is a Combination Line Connector with dimensions of 0.68" x 0.947" x 1.09". Rated for 125V, it uses GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator material. Ideal for applications requiring a polarized male plug with cable mounting and operating temperatures from -40 to 125°C.
DT04-6P-EP14
TE Connectivity's DT04-6P-EP14 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring male contact gender and receptacle body style with strain relief option.
DTM06-4S-E007
TE Connectivity's DTM06-4S-E007 is a 1.57" x 0.694" x 0.685" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring 4 contacts, UL certification, and a 7.5A signal current rating, it is ideal for cable mounting applications requiring polarized female connectors with strain relief.
12052848
Aptiv
Aptiv's 12052848 is a Combination Line Connector with POLYAMIDE6 insulator. It has 6 contacts, female gender, and crimp termination. Used for cable mounting applications, mating info is 12124107 with an empty shell design.
AT06-4S-MM01
Amphenol
The Amphenol AT06-4S-MM01 is a combination line connector with 4 contacts, rated for 13A signal current. It features a polyethylene insulator and operates b/w -55°C to 125°C. With a compact body size of 0.902" x 0.815" x 1.05", it is ideal for cable mounting applications requiring female contact gender and round socket style connections.
929504-4
TE Connectivity's 929504-4 is a Combination Line Connector with dimensions of 1.31"x0.629"x1.16". It has 10 contacts, rated at 20A for signal current, and operates b/w -40°C to 130°C. Ideal for cable mounting applications requiring polarized female connectors with POLYBUTYLENE TEREPHTHALATE insulator material.
12065287
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE; Mixed Contacts: NO; DIN Conformance: NO;
B02B-JWPF-SK-R(LF)(SN)
J S T Mfg
B02B-JWPF-SK-R(LF)(SN) by J S T Mfg is a Combination Line Connector with TIN contact finish and POLYBUTYLENE TEREPHTHALATE insulator. Featuring COPPER ALLOY contacts, it has 2 male contacts, UL 94V-0 flammability rating, and waterproof option. Ideal for board mounting with press fit termination, suitable for various applications requiring reliable connections.
643424-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Termination Contact Finish: TIN; Total No. of Contacts: 6;
DT06-12SA-B016
TE Connectivity's DT06-12SA-B016 is a 2-row combination line connector with 12 contacts, rated for 250V and 13A. With GLASS FILLED POLYAMIDE insulator material, it operates b/w -55 to 125 °C, making it ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
DTP06-2S-CE09
TE Connectivity's DTP06-2S-CE09 is a combination line connector with dimensions of 1.867" x 0.883" x 0.711". It has a rated voltage of 200V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is suitable for applications requiring a 25A signal current and features a polarized housing with one port.
34691-0200
Molex
COMBINATION LINE CONNECTOR; Reliability: COMMERCIAL; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3; Contact Material: COPPER ALLOY;
DTM04-6P-E005
TE Connectivity's DTM04-6P-E005 is a 1.77"x.756"x.937" combination line connector with GLASS FILLED POLYAMIDE insulator, UL 94V-0 flammability rating, and 250V voltage. It has 6 contacts, rated at 7.5A for signal current, operating from -55 to 125°C. Ideal for cable mounting applications requiring a polarized male connector with strain relief option.
30700-1120
The Molex 30700-1120 Combination Line Connector features a body size of 0.808" x 0.928" x 1.243", with SYNDIOTACTIC POLYSTYRENE insulator material. It has 12 contacts, rated for 7A signal current, suitable for board mounting applications. Operating temperature range is -40 to 100°C, with solder termination and male SQ PIN-SKT contact style.
1-776267-1
TE Connectivity's 1-776267-1 is a Combination Line Connector with 3 rows, 14 contacts, and UL94V-0 flammability rating. Featuring a mating contact pitch of 0.157", it is ideal for board mounting applications with a temperature range of -40 to 125°C. The connector has a polarization key, solder termination, and rated current of 17A for reliable commercial use.
DTP06-2S
TE Connectivity's DTP06-2S is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and -55 to 125°C. It features UL 94V-0 flammability code, polarized key, and supports up to 25A signal current. Ideal for cable mounting applications requiring a crimp termination with strain relief.
1-480273-0
TE Connectivity's 1-480273-0 is a combination line connector with polyamide insulator material. It has two loaded rows and can operate in temperatures ranging from -55 to 105°C. This plug-style connector is commonly used in panels for crimp termination applications.
AT06-12SC-SRGN
The Amphenol AT06-12SC-SRGN is a Combination Line Connector with 12 contacts, rated at 13A signal current. Its compact body measures 1.772" x 0.827" x 1.713", made of POLYETHYLENE for durability. Ideal for applications requiring reliable cable mounting in temperatures ranging from -55°C to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
929504-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Additional Features: COMPATIBLE CONTACTS: 927778-1; 927778-3; 927775-1; 926755-1; 926756-1; Filter Feature: NO;
TE Connectivity's 929504-1 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 4 contacts, rated at 29A for signal current, and operates b/w -40 to 130°C. Ideal for cable mounting applications requiring a polarized female connector with 2 loaded rows.
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mixed Contacts: NO;
929505-7
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: 929504-7; Filter Feature: NO; Total No. of Contacts: 22;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Rated Current - Signal: 29 A; Insulator Material: POLYBUTYLENE TEREPHTHALATE; Minimum Operating Temperature: -40 Cel;
929505-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Mixed Contacts: NO; Contact Material: NOT SPECIFIED;
929504-2
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Mixed Contacts: NO; Empty Shell: YES;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Minimum Operating Temperature: -40 Cel; Contact Material: NOT SPECIFIED; Rated Current - Signal: 29 A;
929504-7
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; IEC Conformity: NO; MIL Conformity: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Width: .629 inch; Body Depth: 1.16 inch; Body Length: 2.5 inch;
929504-5
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Total No. of Contacts: 14; Mounting Type: CABLE;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: NOT SPECIFIED; Mounting Type: CABLE; Mixed Contacts: NO;
929505-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Terminal Pitch (mm): 5; IEC Conformity: NO; No. of Rows Loaded: 2;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Info.: 929504-3; Empty Shell: YES; Mating Contact Finish: NOT SPECIFIED;
929504-3
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Mating Contact Finish: NOT SPECIFIED; Filter Feature: NO;
TE Connectivity's 929504-3 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It features 8 contacts, rated at 29A signal current, and operates b/w -40 to 130°C. Ideal for cable mounting applications requiring a polarized female connector with 2 rows of contacts.
929505-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 4; Manufacturer Series: 929505; IEC Conformity: NO;
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Row Spacing (inch): 0.22; DIN Conformance: NO; IEC Conformity: NO;
929504-6
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Additional Features: COMPATIBLE CONTACTS: 927778-1; 927778-3; 927775-1; 926755-1; 926756-1; Total No. of Contacts: 18;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved