Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 33482-2101 is a Combination Line Connector with dimensions of 1.718" x 0.875" x 2.144". It has 20 contacts, male gender, and blade pin-skt style for crimp termination. Ideal for cable mounting applications requiring a two-row loaded connector with glass-filled polyamide/syndiotactic polystyrene insulator material.
Median Price
$2.925
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Misumi USA
1+ parts
$1.920
100+ parts
1k+ parts
-
10k+ parts
Waytek Inc.
$2.427
$1.771
$1.599
Interstate Connecting
$2.741
$2.403
$2.170
Adafruit Industries
$2.754
Heilind Electronics
$2.755
$2.317
$2.179
Avnet
$2.831
$2.145
Chip1Stop
$3.880
$2.830
$2.200
$1.970
RS (Exports)
$4.430
Arrow
$4.864
$3.376
$2.782
Newark
$5.710
$4.320
$3.290
Element14
$5.840
$4.450
$3.760
TTI
$1.900
$1.760
NEP Electronics
DigiKey
$2.970
$2.760
$1.910
TTI Europe
$1.922
$1.728
Farnell
$3.130
$2.850
Master Electronics
$3.380
$2.530
$2.460
Powell Electronics
$2.880
$2.670
Verical
$4.312
$3.990
Distrelec
Digiode
$1.824
Nova Conductors
$2.720
TME
$3.100
$2.860
CustomConnectorKits
Greenchips
Vyrian
VNN
Q Components
Electro Sonic
$2.640
$1.820
IBS Electronics
$4.766
$3.567
$3.469
Cyclops Electronics Ltd
Andel Nordic
$1.346
$1.292
Semicontronic
$1.610
$1.570
$1.562
Corphita
Argo Parts USA
Netroflash
Advanced Electronics
Continental Prestige Electronics
$4.230
$2.230
Aztec Data Supply Inc.
$9.715
Perfect Parts
Infinite Electronics LLP (Excess)
GreenTree Electronics
Glotronic Ltd.
Robosynatics
$2.605
$2.552
Lucentia Tech
EMSNET (Excess)
Authorized Procurement Solutions
Resion (Excess)
Eastek
Assy Fe
The compact size of the body allows for easy installation and does not take up much space.
The slim width of the body enables flexibility in positioning and saves space in the overall design.
The deep body depth accommodates multiple rows of contacts, providing ample room for connection options.
The use of high-quality insulator materials ensures durability and reliable performance in various environmental conditions.
Having two loaded rows allows for increased connectivity options and versatility in configurations.
The option for an empty shell allows for customizable configurations, making it suitable for diverse applications.
With a high number of contacts, this connector can accommodate complex wiring setups and facilitate multiple connections.
The cable mounting type simplifies installation and provides a secure connection for reliable performance.
Crimp termination ensures a strong and stable connection between wires and contacts, reducing the risk of disconnection.
The male contact gender is common and compatible with various female connectors, offering versatility in connectivity.
The blade pin socket contact style provides a secure connection and ease of insertion and removal of contacts.
Combination Line Connectors 33482-2101 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Style:
Empty Shell:
Filter Feature:
Insulator Material:
Mixed Contacts:
Mounting Type:
No. of Rows Loaded:
Option:
Termination Type:
Total No. of Contacts:
33482-2101 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Assembly/Origin - Mult Devs Equipment Transfer 10/Oct/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Diodes Incorporated
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KYOCERA AVX
Unitrode
Leshan Radio
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
NXP Semiconductors
Siemens
12162193
Aptiv
Aptiv's 12162193 is a COMBINATION LINE CONNECTOR with Body Length of 0.629" and Body Depth of 1.067". Made of POLYBUTYLENE TEREPHTHALATE, it has 2 FEMALE contacts for CABLE mounting. Ideal for automotive applications requiring reliable electrical connections.
2103124-4
TE Connectivity
TE Connectivity's 2103124-4 is a Combination Line Connector with EMI shielding, male contact gender, and blade pin-skt contact style. It has a body length of 1.78", width of 1.59", and depth of 1.224". Ideal for commercial applications requiring a mains connector rating of 115/230VAC.
DF62W-9S-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
DT04-6P-L012
TE Connectivity's DT04-6P-L012 is a 3-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for applications requiring a polarized male connector with UL certification and panel mounting option.
AT04-3P-SR02BLK
Amphenol
The Amphenol AT04-3P-SR02BLK is a combination line connector with 3 contacts, rated for 13A signal current. It features a polyethylene insulator and operates in temperatures ranging from -55°C to 125°C. Ideal for cable mounting applications requiring male contact gender and crimp termination.
DT04-12PC-BE02
TE Connectivity's DT04-12PC-BE02 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a male contact gender and receptacle body style with strain relief option.
AT06-3S-SR02BLK
The Amphenol AT06-3S-SR02BLK is a combination line connector with 3 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. With a plug body style and round pin socket contact, it is ideal for cable mounting applications.
AT06-2S-RD01
The Amphenol AT06-2S-RD01 is a combination line connector with 2 contacts, rated at 13A. Featuring a POLYETHYLENE insulator, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, mating with AT06-2P-RD01 connectors for crimp termination in female plug configurations.
DT15-12PA-B028
TE Connectivity's DT15-12PA-B028 is a 2-row combination line connector with 250V rated voltage and 13A signal current. With a body length of 1.555" and width of 2.331", it operates b/w -55°C to 125°C, suitable for panel mounting applications requiring solder termination in male receptacle connectors.
DTM06-6S-E007
TE Connectivity's DTM06-6S-E007 is a 2-row, 6-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A signal current, it operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief option.
ATM06-3S
The Amphenol ATM06-3S is a combination line connector with 3 contacts, rated at 7.5A signal current. Featuring POLYETHYLENE insulator material, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this female plug connector has a body size of 0.642" x 0.638" x 1.087".
1-1703639-1
TE Connectivity 1-1703639-1 is a Combination Line Connector with dimensions 2.13"x1.012"x1.23". Rated for 60V, it has GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator and operates b/w -40°C to 140°C. Ideal for applications requiring a polarized, UL-rated connector with 12 contacts and 20A signal current capacity.
DT06-4S-E003
TE Connectivity's DT06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL certification.
DT06-3S-E008
TE Connectivity's DT06-3S-E008 is a 1.601" x 0.796" x 0.968" combination line connector with GLASS FILLED POLYAMIDE insulator for -55 to 125 °C operation at 250V. It features 3 contacts, UL94V-0 flammability rating, and supports up to 13A signal current. Ideal for cable mounting applications requiring crimp termination and polarization keying.
DTM06-2S-EE03
TE Connectivity's DTM06-2S-EE03 is a 1.47" x 0.569" x 0.508" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and -55 to 125°C. Featuring polarized housing, UL 94V-0 flammability code, and crimp termination, it's ideal for cable mounting applications requiring a 7.5A signal current.
AT04-3P-BM04
The Amphenol AT04-3P-BM04 is a combination line connector with 3 contacts, rated at 13A. It features a body size of 0.961" x 0.827" x 0.835", made of polyethylene for operating temperatures from -55°C to 125°C. Ideal for board mounting applications, it has male contact gender and solder termination.
54201412
Delphi Connection Systems
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mixed Contacts: NO; Body Width: .882 inch; Total No. of Contacts: 14;
DT04-12PA-BE03
TE Connectivity's DT04-12PA-BE03 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V, it has a max operating temp of 125°C and -55°C min. Ideal for applications requiring a polarized, crimped male connector with 12 contacts and UL94V-0 flammability rating.
HVSL800022A1H6
Amphenol's HVSL800022A1H6 is a 2.898" x 2.598" x 1.949" combination line connector with POLYETHYLENE insulator, rated for -40 to 125°C. Featuring UL94V-0 flammability code, it has 200A signal current capacity and is EN/UL compliant. Ideal for cable and panel mounting applications requiring reliable female receptacle connectors with screw termination.
AT06-6S-SR01BLK
Amphenol's AT06-6S-SR01BLK is a 2-row combination line connector with 6 contacts, rated for 13A signal current. Made of polyethylene, it operates b/w -55°C to 125°C. Ideal for cable mounting applications due to its compact body size of 1.028" x 0.815" x 1.724".
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33481-0601
Molex
Molex 33481-0601 is a Combination Line Connector with 6 contacts, rated at 22A. Featuring a mating contact pitch of 0.138", it has a body length of 1.159" and width of 0.674". Ideal for commercial applications, this connector operates b/w -40°C to 125°C, with a polarized housing and UL reference standard compliance.
33481-0301
Molex 33481-0301 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, this connector features polarized housing, UL reference standard compliance, and male gender with blade pin-skt contact style.
33481-0201
Molex 33481-0201 is a Combination Line Connector with 0.673" body width and 2.161" depth, made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE. It has 2 contacts, male BLADE PIN-SKT style, crimp termination, and cable mounting. Ideal for applications requiring reliable electrical connections in limited space environments.
33481-0401
Molex 33481-0401 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED NYLON Insulator, and -40 to 125 °C Operating Temperature. It has 4 contacts for 22A signal current, suitable for commercial applications in cable mounting setups.
33482-4001
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Mounting Type: CABLE; Total No. of Contacts: 8;
33482-8601
The Molex 33482-8601 is a combination line connector with dimensions of 1.439" x 0.875" x 2.144". It has an insulator made of glass-filled polyamide/syndiotactic polystyrene and features 12 contacts in a male blade pin-skt style. This connector is commonly used for cable mounting applications requiring crimp termination.
33482-3601
Combination Line Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
33482-4801
Molex 33482-4801 is a Combination Line Connector with dimensions of 0.887" L x 0.875" W x 2.144" D. It has 8 contacts, male gender, and blade pin-skt style. Used for cable mounting with crimp termination, ideal for applications requiring compact connectors.
33482-6201
Molex 33482-6201 is a Combination Line Connector with dimensions 1.163" x 0.875" x 2.144". It has 12 contacts, male gender, and blade pin-skt style. Ideal for cable mounting applications requiring crimp termination in industries like automotive and electronics.
33482-0601
Molex 33482-0601 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, it features polarized housing, male contact gender, and locking mounting option for secure cable connections at temperatures ranging from -40 to 125°C.
33482-1601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Contact Design: PREASSEM CONN;
33481-0202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body Width: .673 inch; Termination Type: CRIMP;
33482-3628
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Total No. of Contacts: 6; Body Width: .875 inch;
33482-4104
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Contact Style: BLADE PIN-SKT; Empty Shell: YES;
33482-6202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Mixed Contacts: NO; Body Depth: 2.144 inch;
33482-6261
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Total No. of Contacts: 12; Termination Type: CRIMP; Body Length: 1.163 inch;
33482-4802
Molex 33482-4802 is a Combination Line Connector with dimensions of 0.887" x 0.875" x 2.144". It has GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE insulator, 8 contacts, and male BLADE PIN-SKT style. Ideal for cable mounting applications requiring crimp termination in a two-row configuration.
33482-8726
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; Insulator Material: GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE; Total No. of Contacts: 12;
33482-3629
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; No. of Rows Loaded: 2; Body Depth: 2.144 inch; Mixed Contacts: NO;
33482-4853
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body Length: .887 inch; Body Width: .875 inch; Mating Contact Finish: NOT APPLICABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved