Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 33481-0301 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, this connector features polarized housing, UL reference standard compliance, and male gender with blade pin-skt contact style.
Median Price
$1.286
Lifecycle Status
Suppliers In-Stock
38
In-Stock Inventory
1k+
Waytek Inc.
1+ parts
$0.914
100+ parts
$0.744
1k+ parts
$0.694
10k+ parts
-
Interstate Connecting
$1.039
$0.846
$0.823
Heilind Electronics
$1.117
$0.897
$0.884
Adafruit Industries
$1.138
$1.081
Element14
$1.231
$1.164
$1.001
Arrow
$1.542
$1.331
$1.185
Misumi USA
$1.950
RS Americas
$2.010
$1.590
$1.410
Mouser Electronics
$2.140
$1.670
$1.210
$1.080
RS (Exports)
$2.180
Newark
$2.390
$1.910
$1.440
Farnell
$2.480
$1.710
$1.220
DigiKey
$2.640
$1.855
$1.464
Distrelec
$2.698
Verical
$0.951
NEP Electronics
$1.237
PEI Genesis
TTI
$0.670
$0.640
Power & Signal
Master Electronics
$1.680
$1.300
$1.070
Powell Electronics
$1.170
$1.050
TTI Europe
$0.721
$0.666
Chip1Stop
$1.270
Digiode
$0.766
Maritex
$0.998
$0.620
$0.548
Nova Conductors
$1.380
TestEquity
TME
$1.620
$1.160
Vyrian
IBS Electronics
$1.304
$1.024
NAC Semi
$1.250
$1.150
VNN
Sensible Micro Corp
$0.483
$0.449
Q Components
Chip Stock
EMSNET
Bristol Electronics
Flex Direct, LLC
Semicontronic
$0.570
$0.556
$0.553
Corphita
$0.725
Modulus Dynamics
$1.105
Advanced Electronics
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.570
$1.110
$1.040
Allen Electronics Distributors
$2.610
$1.930
Andel Nordic
$5.042
$4.840
Aztec Data Supply Inc.
$10.615
RC Electronics
$1.420
$1.340
$1.310
Authorized Procurement Solutions
EMSNET (Excess)
Kepictronics
Resion (Excess)
GreenTree Electronics
Glotronic Ltd.
Abacus Technologies
The tight mating contact pitch of 0.138 inch allows for efficient and secure connections between components, ensuring reliable signal transmission.
The compact body length of 0.746 inch saves space and makes the connector suitable for applications where size is a constraint.
The use of glass filled nylon as the insulator material provides excellent durability and resistance to heat, making the connector suitable for demanding environments.
With a high maximum operating temperature of 125°C, this connector can withstand elevated temperatures without compromising performance.
The connector has 3 contacts, allowing for multiple connections in a single unit, making it versatile and suitable for various applications.
The blade pin-skt contact style ensures secure and stable connections, reducing the risk of signal loss or interference.
Combination Line Connectors 33481-0301 attributes and parameters. Explore more Combination Line Connectors devices from Molex
Additional Features:
Body Width:
Body Length:
Body or Shell Style:
Connector Type:
Contact Design:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Empty Shell:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Type:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Material:
Sub-Category:
Total No. of Contacts:
33481-0301 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - Mult Devs Design 11/Aug/2023
PCN Assembly/Origin - Mult Devs Supplier Change 19/Apr/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BAV99
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
Electronic Devices
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
General Diode
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
1N4148WS
Promax-johnton
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
DT06-4S-E003
TE Connectivity
TE Connectivity's DT06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring polarized design and UL certification.
776164-4
TE Connectivity's 776164-4 is a Combination Line Connector with dimensions of 2.496" x 1.323" x 1.362". It features GLASS FILLED POLYBUTYLENE TEREPHTHALATE insulator, UL Flammability Code 94V-0, and rated current of 17A. Ideal for applications requiring a polarized connector with 35 contacts and operating temperatures from -40°C to 125°C.
DT06-6S-E003
TE Connectivity's DT06-6S-E003 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, featuring a polarized design and UL flammability rating of 94V-0.
350836-1
Tyco Electronics Amp
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Total No. of Contacts: 12; Empty Shell: NO; UL Flammability Code: 94V-0;
DTM06-3S-E004
TE Connectivity's DTM06-3S-E004 is a 3-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 7.5A, it operates b/w -55 to 125 °C, suitable for cable mounting applications requiring UL-certified connectors with polarized housing and crimp termination.
DT06-12SD-CE06
TE Connectivity's DT06-12SD-CE06 is a 2-row, 12-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring a polarized, UL-certified connector with strain relief.
106462-1
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Empty Shell: YES; DIN Conformance: NO; Total No. of Contacts: 2;
DTP06-4S-E003
TE Connectivity's DTP06-4S-E003 is a 4-contact combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 200V and 25A, it operates b/w -55 to 125 °C, ideal for cable mounting applications requiring UL standards compliance.
DT04-08PA-E008
TE Connectivity's DT04-08PA-E008 is a 2-row combination line connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications requiring a polarized male receptacle with strain relief.
DF62W-9S-2.2C
Hirose Electric
COMBINATION LINE CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
DTP06-2S-C015
TE Connectivity's DTP06-2S-C015 is a 1.364" x 0.732" x 0.711" combination line connector with GLASS FILLED POLYAMIDE insulator, rated for 200V and 25A. It features polarized housing, UL flammability code 94V-0, and operates b/w -55°C to 125°C. Ideal for cable mounting applications requiring a female plug with round pin sockets and strain relief option.
12033871
Aptiv
COMBINATION LINE CONNECTOR;
934453102
TE Connectivity 934453102 is a Combination Line Connector with 2 loaded rows. It operates b/w -55°C to 125°C, suitable for 115/230VAC mains connectors. Featuring a polarized design, it has a terminal pitch of 4.5mm and plug body style, ideal for cable mounting applications.
12015798
Aptiv's 12015798 is a Combination Line Connector with POLYAMIDE6 insulator. It has 4 contacts, female gender, and crimp termination. Used for cable mounting applications with mating info 12015024.
12015782
AT06-12SA-SR2GY
Amphenol
The Amphenol AT06-12SA-SR2GY is a 12-contact combination line connector with POLYETHYLENE insulator. It has a rated signal current of 13A, operating from -55°C to 125°C. Ideal for cable mounting applications requiring female contacts and SQ PIN-SKT style connectors.
7282-1081-40
Yazaki
Yazaki's 7282-1081-40 is a Combination Line Connector with POLYBUTYLENE TEREPHTHALATE insulator. It has 8 contacts, male gender, and mates with 7283-1081-40. Designed for cable mounting, it is ideal for automotive wiring applications.
929505-2
TE Connectivity's 929505-2 is a Combination Line Connector with dimensions of 0.937" x 0.881" x 1.02". It has 6 contacts, rated at 29A for signal current, and operates b/w -40°C to 130°C. Ideal for applications requiring a polarized male connector with panel mounting and POLYBUTYLENE TEREPHTHALATE insulator material.
DT15-6P-G003
TE Connectivity's DT15-6P-G003 is a combination line connector with dimensions of 1.555" x 1.685" x 1.195". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This male connector with 6 contacts is commonly used for panel mounting applications requiring a max current of 13A.
DT04-12PB-P030
TE Connectivity's DT04-12PB-P030 is a combination line connector with dimensions of 2.043" x 1.597" x 0.876". It has a rated voltage of 250V and can operate in temperatures ranging from -55°C to 125°C. This connector, made of glass-filled polyamide, is commonly used for cable mounting applications requiring a polarized, crimped male contact with strain relief.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
33481-0601
Molex
Molex 33481-0601 is a Combination Line Connector with 6 contacts, rated at 22A. Featuring a mating contact pitch of 0.138", it has a body length of 1.159" and width of 0.674". Ideal for commercial applications, this connector operates b/w -40°C to 125°C, with a polarized housing and UL reference standard compliance.
33481-0201
Molex 33481-0201 is a Combination Line Connector with 0.673" body width and 2.161" depth, made of GLASS FILLED POLYAMIDE/SYNDIOTACTIC POLYSTYRENE. It has 2 contacts, male BLADE PIN-SKT style, crimp termination, and cable mounting. Ideal for applications requiring reliable electrical connections in limited space environments.
33481-0401
Molex 33481-0401 is a Combination Line Connector with 0.138" Mating Contact Pitch, GLASS FILLED NYLON Insulator, and -40 to 125 °C Operating Temperature. It has 4 contacts for 22A signal current, suitable for commercial applications in cable mounting setups.
33482-4001
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Empty Shell: YES; Mounting Type: CABLE; Total No. of Contacts: 8;
33482-8601
The Molex 33482-8601 is a combination line connector with dimensions of 1.439" x 0.875" x 2.144". It has an insulator made of glass-filled polyamide/syndiotactic polystyrene and features 12 contacts in a male blade pin-skt style. This connector is commonly used for cable mounting applications requiring crimp termination.
33482-3601
Combination Line Connectors; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
33482-4801
Molex 33482-4801 is a Combination Line Connector with dimensions of 0.887" L x 0.875" W x 2.144" D. It has 8 contacts, male gender, and blade pin-skt style. Used for cable mounting with crimp termination, ideal for applications requiring compact connectors.
33482-6201
Molex 33482-6201 is a Combination Line Connector with dimensions 1.163" x 0.875" x 2.144". It has 12 contacts, male gender, and blade pin-skt style. Ideal for cable mounting applications requiring crimp termination in industries like automotive and electronics.
33482-2101
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Style: BLADE PIN-SKT; Contact Material: NOT APPLICABLE; Body Length: 1.718 inch;
33482-0601
Molex 33482-0601 is a Combination Line Connector with 0.138" pitch, GLASS FILLED NYLON insulator, and 22A signal current rating. Ideal for commercial applications, it features polarized housing, male contact gender, and locking mounting option for secure cable connections at temperatures ranging from -40 to 125°C.
33482-1601
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mounting Option-1: LOCKING; Contact Design: PREASSEM CONN;
33481-0202
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body Width: .673 inch; Termination Type: CRIMP;
33481-0302
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: NO; Reference Standard: UL;
33481-0303
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Empty Shell: NO; Contact Pattern: RECTANGULAR;
33481-0307
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Maximum Operating Temperature (Cel): 125; IEC Conformity: NO;
33481-0309
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Minimum Operating Temperature: -40 Cel; Rated Current - Signal: 22 A;
33481-0313
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
33481-0314
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; IEC Conformity: NO; DIN Conformance: NO;
33481-0318
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Manufacturer Series: 33481; Rated Current - Signal: 22 A;
33481-0319
COMBINATION LINE CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Mixed Contacts: NO; Mounting Type: CABLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved