Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.462
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$0.428
100+ parts
$0.343
1k+ parts
$0.331
10k+ parts
$0.300
Compona
$0.560
$0.390
$0.280
$0.270
DigiKey
$0.660
$0.479
$0.407
$0.382
Mouser Electronics
$0.680
$0.528
$0.451
$0.360
RS (Exports)
$0.780
$0.520
$0.480
-
RS Americas
Element14
$0.818
$0.661
$0.587
$0.549
Verical
$0.344
$0.332
$0.301
Farnell
$0.408
$0.320
Distrelec
TTI Europe
$0.381
$0.322
Powell Electronics
$0.323
$0.261
Chip1Stop
TTI
$0.397
$0.363
NEP Electronics
Nova Conductors
$0.351
Digiode
$0.378
TME
$0.530
$0.421
$0.361
NAC Semi
$0.442
Vyrian
VNN
IBS Electronics
$0.398
Rutronik
Continental Prestige Electronics
Argo Parts USA
$0.341
Corphita
$0.358
Aztec Data Supply Inc.
$5.980
Abacus Technologies
Authorized Procurement Solutions
Perfect Parts
GreenTree Electronics
Eastek
Robosynatics
$2.701
$2.646
Assy Fe
Assembly Products 1727040158 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BSS138
Weitron Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Form: GULL WING; Terminal Position: DUAL;
2N2222A
Infineon Technologies
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Hitano Enterprise
Toshiba
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bytesonic Electronics
2N7002
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Crimson Semiconductor
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
W3S-P012
TE Connectivity's W3S-P012 is a POWER AND SIGNAL assembly item for DT SERIES. With a temp range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a WEDGE ITEM in various applications.
5600230448
Molex
Molex 5600230448 is a MINI50 unsealed single row receptacle with crimp terminal type. It has a rated current of 4A and rated DC voltage of 14V, suitable for power applications. Made of copper alloy, it features compression contact style and female contact gender, with cable entry ranging from 0.043" to 0.055".
50212-8000
The Molex 50212-8000 CONTACT is a female assembly product with rated AC/DC voltage of 125V, current of 3A, and contact resistance of 10mohm. It supports wire sizes from 30 to 24 AWG and operates in temperatures ranging from -40 to 105 °C. Ideal for applications requiring reliable electrical connections in various industries.
979-009-030R121
Norcomp Interconnect Devices
Norcomp's 979-009-030R121 backshell is a zinc alloy D-SUB connector accessory. It can operate in temperatures ranging from -45°C to 120°C, with a screw mounting option. Ideal for assembly products requiring durable and reliable interconnect solutions.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
DTP06-2S-C017
TE Connectivity's DTP06-2S-C017 is a FEMALE power and signal connector with 25A rated current, 200V DC voltage, and -55 to 125°C operating temperature range. Ideal for applications requiring high-power transmission in harsh environments.
593
Keystone Electronics
Keystone Electronics 593 CONTACT features FEMALE gender, RIGHT ANGLE mounting, and RND PIN-SKT style. Made of STEEL with 0.12" terminal length. Ideal for assembly products requiring SOLDER terminals in various applications.
DF22A-1416SCFA
Hirose Electric
48099-4000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 67910-0002;
5213
64325-1023
CONNECTOR ACCESSORY; Assembly Item Name: SEALING ITEM; Maximum Operating Temperature: 125 Cel; DIN Conformity: NO; IEC Conformity: NO; Usage: 64318, 64319, 64320, 64321;
SSH-003GA-P0.2
J S T Mfg
SSH-003GA-P0.2 by J S T Mfg is a CRIMP terminal with contact design of STRIP OR LOOSE, suitable for 28-32 AWG wires. It has a rated current of 1A and can handle temperatures from -25 to 85 °C. Ideal for applications requiring FEMALE contacts with bellowed contact style in assembly products.
33000-1004
M23053/5-103-9
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL;
8599-0720-900
43030-0007
Molex 43030-0007 CONTACT features CRIMP terminals for 24-20 AWG wires, rated at 8.5A current. Suitable for use with connectors like 43025/43645/44133, it has a 0.073" cable entry and is made of PHOSPHOR BRONZE material.
WP-4S
Amphenol
CONNECTOR ACCESSORY; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; DIN Conformity: NO; Usage: DTP SERIES;
12089040
Delphi Connection Systems
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Maximum Cable Entry: .075 inch;
5-66506-9
Tyco Electronics Amp
5-66506-9 by Tyco Electronics Amp is a CRIMP terminal with 0.05" min cable entry, suitable for 24-20 AWG wires. Its ROUND PIN-SOCKET contact design and MALE gender make it ideal for straight mounting applications in assembly products.
CC79L-2630-01-L
Samtec
Samtec CC79L-2630-01-L CONTACT features 10µ finish thickness, LOOSE design for 26-30 AWG wire. Made of PHOSPHOR BRONZE, ideal for Assembly Products applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1727040100
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel;
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
1727040093
CONNECTOR ACCESSORY; Assembly Item Name: SCREW ITEM; Usage: FCT D-SUB; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
172773-1
TE Connectivity's 172773-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 14 AWG and operates b/w -30°C to 105°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.082" to 0.133".
1727040102
Molex 1727040102 BACKSHELL for FCT D-SUB features 0.118-0.472" cable entry, ZINC ALLOY material, and 4-40 UNC screw mounting. Operates b/w -35 to 100°C, ideal for securing cables in electronic assemblies.
1727040150
Molex 1727040150 is a FCT series connector with a crimp terminal type. It has a max operating temperature of 155°C and a min operating temperature of -55°C. This power contact, made of copper alloy, is suitable for use in assemblies requiring a rated current of 10A and wire sizes ranging from 20 AWG to 16 AWG.
172748-1
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; DIN Conformity: NO;
1727040094
CONNECTOR ACCESSORY; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel; Maximum Cable Entry: .354 inch; Mounting Option-2: SCREW; Material: ZINC ALLOY;
1727040097
CONNECTOR ACCESSORY; Minimum Cable Entry: .118 inch; Assembly Item Name: BACKSHELL; Additional Features: SHIELDED; IEC Conformity: NO; Mounting Option-2: SCREW;
1727040099
1727184121
1727040104
1727040155
1727654121
1727040159
1727090001
1727040109
1727092005
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved