Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1727040150 is a FCT series connector with a crimp terminal type. It has a max operating temperature of 155°C and a min operating temperature of -55°C. This power contact, made of copper alloy, is suitable for use in assemblies requiring a rated current of 10A and wire sizes ranging from 20 AWG to 16 AWG.
Median Price
$2.640
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.589
100+ parts
$2.178
1k+ parts
$2.048
10k+ parts
-
Interstate Connecting
Farnell
$2.650
$1.710
$1.660
Arrow
$3.045
$2.024
Newark
$4.350
$3.340
$2.860
Element14
$4.920
$3.850
$3.190
$2.900
Distrelec
Verical
$2.779
$2.362
$2.215
Compona
TTI
$2.630
$2.180
$2.150
TTI Europe
$2.179
$2.017
Chip1Stop
$2.320
Digiode
$2.460
Nova Conductors
$2.490
Vyrian
VNN
NAC Semi
$1.970
$1.820
Kallista Electronics Ltd
Corphita
$2.330
Continental Prestige Electronics
$2.440
Argo Parts USA
Aztec Data Supply Inc.
$7.693
Eastek
$1.530
Glotronic Ltd.
Lucentia Tech
$10.500
Netroflash
$2.366
$2.316
Robosynatics
A high-quality connector designed for assembly products, ensuring reliable performance and compatibility.
The connector's durable finish thickness enhances its longevity, making it resistant to wear and tear.
The crimp terminal design enables easy and secure wire connections, eliminating the need for additional tools.
Able to function flawlessly in extreme temperature conditions, from -55°C to 155°C, providing flexibility for various applications.
The use of copper alloy material ensures excellent electrical conductivity, minimizing signal loss and maximizing performance.
The connector features a female contact gender, providing compatibility with a wide range of male connectors.
Specifically designed for power applications, the connector can handle high-current requirements up to 10 A.
The straight mounting style simplifies installation and offers a compact and efficient connection solution.
The rounded pin socket contact style ensures a secure and stable connection, preventing accidental disconnection.
Compatible with a wide range of wire sizes, from 20 AWG to 16 AWG, allowing for versatile usage in different projects.
Assembly Products 1727040150 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Design:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LL4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SS495A-SP
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
PIC18F4550-I/PT
Microchip Technology
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
Sinyork
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Operating Temperature: 85 Cel; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE;
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
0413-204-2005
TE Connectivity
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Design: POWER AND SIGNAL; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; MIL Conformity: NO;
929939-3
TE Connectivity 929939-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 130°C, suitable for wire sizes ranging from 20 to 17 AWG. With a rated current of 30A, it's commonly used in assembly products for female contacts.
61030012010
Harting Electronics & Kg
The Harting Electronics & Kg 61030012010 is a metal HOOD for D-SUB CONNECTOR. It has a max operating temp of 90°C and min of -20°C. Mounting options include SCREW (#4-40).
5205817-1
TE Connectivity 5205817-1 is a hardware female screwlock for metal shell or all plastic connectors. It supports max wire size of 0 AWG, made of steel, and mounts with #4-40 UNC screws. Ideal for secure assembly in various applications.
282110-1
TE Connectivity's 282110-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 15 AWG, rated for 14A current, and operates b/w -40 to 125 °C. Ideal for applications requiring female blade pin-skt contacts in assembly products.
M23053/16-004-0
TE Connectivity's M23053/16-004-0 is a SINGLE WALL TAPER SLEEVE with CROSSLINKED ELASTOMERIC POLYOLEFIN jacket. It supports wire up to 0 AWG, operating from -75°C to 150°C. Ideal for electrical insulation in various applications.
50394-8051
Molex
50394-8051 by Molex features crimp terminal type, bellowed contact design, and phosphor bronze material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 24 AWG. Suitable for straight mounting with a max cable entry of 0.055 inch.
77138-001LF
Amphenol Communications Solutions
Amphenol's 77138-001LF CONTACT features CRIMP terminals for 30-26 AWG wires. With a PHOSPHOR BRONZE build, it offers FEMALE gender and BELLOWED style for STRAIGHT mounting. Ideal for Assembly Products, this contact has an 8 finish thickness.
M23053/5-106-9
Brady
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED POLYOLEFIN; Construction: SINGLE WALL; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; IEC Conformity: NO;
W3S
W3S by TE Connectivity is an Assembly Product designed for DT SERIES applications. With a temperature range of -55 to 125°C, it supports up to 0 AWG wire size. Made of PBT material, it is ideal for power and signal assemblies requiring high durability.
7-1452665-1
TE Connectivity's 7-1452665-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 23 to 22 AWG and rated current of 10A. Ideal for applications requiring female contact gender, with operating temperatures ranging from -40°C to 130°C.
SVH-41T-P1.1
J S T Mfg
SVH-41T-P1.1 by J S T Mfg is a CRIMP terminal with approvals from CSA, TUV, and UL. It supports wire sizes from 20 AWG to 16 AWG, rated for 10 A current at 250 V AC/DC. Ideal for applications requiring FEMALE contacts with SQUARE PIN-SOCKET style in straight mounting configuration.
14
TERMINAL BLOCK ACCESSORY; Usage: 100 SERIES TERMINAL BLOCK, MINIATURE & SINGLE TIER; Assembly Item Name: GANGING ROD;
39-00-0048
Molex 39-00-0048 is a male contact assembly item with square pin-socket contact design. It supports wire sizes from 28 AWG to 22 AWG and has a finish thickness of 35. Ideal for use with 5559, 30068, and 42475 series housing applications.
1123721-1
TE Connectivity's 1123721-1 plug housing has a finish thickness of 55.11, rated voltage of 250V, and terminal type as crimp. Ideal for discrete wire applications, it features a max operating temperature of 105°C and is designed for power use with female contact gender.
39-00-0213
Molex 39-00-0213 is a crimp contact with square pin-socket design. It supports wire sizes from 24 AWG to 18 AWG and has a finish thickness of 100. Ideal for use in various housing series like 5557, 30067, and more.
FMK2G-K201
Fct Electronic
CONNECTOR ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; Maximum Operating Temperature: 100 Cel; Assembly Item Name: HOOD; Material: ZINC;
1053251002
CONNECTOR ACCESSORY;
3505-28B
3m Electronic Products Division
CONNECTOR ACCESSORY; Manufacturer Series: 3505;
1534805-1
TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1727040100
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel;
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
1727040093
CONNECTOR ACCESSORY; Assembly Item Name: SCREW ITEM; Usage: FCT D-SUB; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
172773-1
TE Connectivity's 172773-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 14 AWG and operates b/w -30°C to 105°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.082" to 0.133".
1727040102
Molex 1727040102 BACKSHELL for FCT D-SUB features 0.118-0.472" cable entry, ZINC ALLOY material, and 4-40 UNC screw mounting. Operates b/w -35 to 100°C, ideal for securing cables in electronic assemblies.
172748-1
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; DIN Conformity: NO;
1727040094
CONNECTOR ACCESSORY; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel; Maximum Cable Entry: .354 inch; Mounting Option-2: SCREW; Material: ZINC ALLOY;
1727040097
CONNECTOR ACCESSORY; Minimum Cable Entry: .118 inch; Assembly Item Name: BACKSHELL; Additional Features: SHIELDED; IEC Conformity: NO; Mounting Option-2: SCREW;
1727040099
1727184121
1727040104
1727040155
1727654121
1727040159
1727090001
1727040109
1727092005
1727040145
CONNECTOR ACCESSORY; Rated Current: 40 A; Maximum Wire Size: 8 AWG; Material: COPPER ALLOY; MIL Conformity: NO; Minimum Wire Size: 10 AWG;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved