Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$0.032
Lifecycle Status
Suppliers In-Stock
16
In-Stock Inventory
1k+
Arrow
1+ parts
$0.046
100+ parts
$0.040
1k+ parts
$0.033
10k+ parts
$0.029
DigiKey
$0.100
$0.045
$0.038
$0.036
Interstate Connecting
-
$0.026
Newark
$0.042
Master Electronics
Verical
Mouser Electronics
$0.035
Powell Electronics
Chip1Stop
$0.051
Heilind Electronics
$0.028
Nova Conductors
Digiode
$0.089
IBS Electronics
TME
Vyrian
VNN
Argo Parts USA
Netroflash
$0.034
Continental Prestige Electronics
Corphita
$0.085
Perfect Parts
Assembly Products 1727184121 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microsemi
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Telefunken Microelectronics
Infineon Technologies
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
FDV303N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
DP83848IVVX/NOPB
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
Asi Semiconductor
1-66741-1
TE Connectivity
TE Connectivity 1-66741-1 is a CRIMP terminal for CPC/G and M SERIES connectors. With a wire gauge of 10 AWG, it supports up to 35A current rating. Made of copper alloy, it is designed for power applications with female contact gender in right angle mounting style.
M23053/16-004-0
Dunbar Products
ASSEMBLY ITEMS; MIL Conformity: NO; Assembly Item Name: TAPER SLEEVE; Construction: SINGLE WALL; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; DIN Conformity: NO;
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
1-1469492-8
TE Connectivity 1-1469492-8 is an Assembly Product with max operating temp of 105°C and min of -55°C. It features a max wire size of 0 AWG, rated current of 1A, and mounting style in right angle. Made from zinc alloy, it's ideal for guiding items in various applications.
SSH-003T-P0.2
J S T Mfg
J S T Mfg's SSH-003T-P0.2 is a CRIMP terminal CONTACT with PHOSPHOR BRONZE material. It supports 32-28 AWG wire sizes, 0.4-0.8 inch cable entry, and MALE gender for STRAIGHT mounting. Ideal for applications requiring precise wire connections in assembly products.
MHDTZK-9-K
Norcomp Interconnect Devices
MHDTZK-9-K by Norcomp is a BACKSHELL KIT with insulator material ABS and zinc alloy construction. It has UL approval, operating from -40°C to 120°C. Ideal for applications requiring secure mounting with 4-40 screws in assembly products.
1053001100
Molex
SHF-001T-0.8BS
SHF-001T-0.8BS by J S T Mfg is a CRIMP terminal for SM SERIES CONNECTOR with 3A rated current, 20 mohm contact resistance, and 0.047-0.071 inch cable entry. It operates b/w -25 to 85 °C and supports 250V AC/DC voltage. Ideal for female contacts in assembly products requiring a straight mounting style.
HDR-E26LPHP+
Honda Tsushin Kogyo
CONNECTOR ACCESSORY; Mounting Option-1: M2; MIL Conformity: NO; IEC Conformity: NO; Material: PBT RESIN; DIN Conformity: NO;
5023810000
Molex 5023810000 is a signal contact assembly product with compression-style male contact. It has a rated current of 1A and rated AC/DC voltage of 50V. Designed for use with CLIK-MATE housing, it supports wire sizes from 26-28 AWG and cable entries up to 0.8 inch.
50125-8000
The Molex 50125-8000 is a male contact assembly product with crimp terminal type. It is designed for use with the 51047 series housing, featuring a finish thickness of 35 and chain contact design. Ideal for wire sizes ranging from 28 to 26 AWG, it offers a straight mounting style and is made of phosphor bronze material.
9019200000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; Assembly Item Name: FERRULE; Maximum Wire Size: 12 AWG; IEC Conformity: NO; Approvals (V): CSA; UL; VDE; MIL Conformity: NO;
HBL60CM31
Hubbell
13711544
Aptiv
Aptiv 13711544 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.067-0.083 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
SSHL-003T-P0.2
SSHL-003T-P0.2 by J S T Mfg is a CRIMP terminal with POLYBUTYLENE TEREPHTHALATE insulator, suitable for wire and discrete cable types. It has a contact resistance of 40 mohm, rated current of 1 A, and operates b/w -25 to 85 °C. Ideal for signal applications requiring FEMALE contacts with SQUARE PIN-SOCKET design.
5-965906-1
TE Connectivity's 5-965906-1 is a CRIMP terminal with stamped contact design. It supports wire gauge 18 (AWG) and has a rated current of 7.5 A. Ideal for applications requiring a female contact gender, it operates b/w -40 to 120 °C temperature range.
AT60-202-16141-22
Amphenol
1906210000
TERMINAL BLOCK ACCESSORY;
12045773
Aptiv 12045773 CONTACT is a MALE CRIMP terminal with 0.067-0.109" cable entry. It has a STRAIGHT mounting style, 0.315" terminal length, and is made of NONFERROUS material. Ideal for assembly products requiring precise male contact connections.
50212-8100
Molex 50212-8100 CONTACT features max. operating temp. of 105°C, rated AC voltage of 125V, and min. wire size of 30 AWG. Ideal for applications requiring female contact gender, with rated current of 3A and material made from phosphor bronze.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1727040100
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel;
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
1727040093
CONNECTOR ACCESSORY; Assembly Item Name: SCREW ITEM; Usage: FCT D-SUB; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
172773-1
TE Connectivity's 172773-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 14 AWG and operates b/w -30°C to 105°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.082" to 0.133".
1727040102
Molex 1727040102 BACKSHELL for FCT D-SUB features 0.118-0.472" cable entry, ZINC ALLOY material, and 4-40 UNC screw mounting. Operates b/w -35 to 100°C, ideal for securing cables in electronic assemblies.
1727040150
Molex 1727040150 is a FCT series connector with a crimp terminal type. It has a max operating temperature of 155°C and a min operating temperature of -55°C. This power contact, made of copper alloy, is suitable for use in assemblies requiring a rated current of 10A and wire sizes ranging from 20 AWG to 16 AWG.
172748-1
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; DIN Conformity: NO;
1727040094
CONNECTOR ACCESSORY; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel; Maximum Cable Entry: .354 inch; Mounting Option-2: SCREW; Material: ZINC ALLOY;
1727040097
CONNECTOR ACCESSORY; Minimum Cable Entry: .118 inch; Assembly Item Name: BACKSHELL; Additional Features: SHIELDED; IEC Conformity: NO; Mounting Option-2: SCREW;
1727040099
1727040104
1727040155
1727654121
1727040159
1727090001
1727040109
1727092005
1727184111
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved