Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY;
Median Price
$7.776
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$4.327
100+ parts
-
1k+ parts
10k+ parts
RS (Exports)
$4.970
RS Americas
$5.040
Heilind Electronics
$6.341
$6.152
Interstate Connecting
Newark
$9.410
$7.860
$7.410
Element14
$9.536
$7.408
$6.782
Farnell
$9.999
$7.117
$6.624
DigiKey
$10.060
$7.264
$6.175
Distrelec
$11.079
$9.801
TTI Europe
$5.765
$5.486
Compona
Verical
TTI
$4.760
$4.670
Chip1Stop
$6.290
$5.400
Digiode
$4.788
Nova Conductors
$6.969
Rapid Electronics
$9.783
Rutronik
$4.390
$4.150
VNN
Vyrian
NAC Semi
$7.480
$6.900
IBS Electronics
$7.500
$5.975
Semicontronic
$4.280
$4.173
$4.152
Corphita
$4.536
Andel Nordic
$6.071
$5.828
Aztec Data Supply Inc.
$6.500
Continental Prestige Electronics
$6.830
Netroflash
$6.621
$6.482
Allen Electronics Distributors
$9.920
Authorized Procurement Solutions
Argo Parts USA
Glotronic Ltd.
Abacus Technologies
Assembly Products 1727040099 attributes and parameters. Explore more Assembly Products devices from Molex
Connector Accessory Type:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Itt Semiconductor
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Texas Instruments
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SN65HVD234DR
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
ST3485EBDR
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
08-70-1039
Molex
The Molex 08-70-1039 is a crimp terminal contact with chain design, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a min cable entry of 0.0452" and max cable entry of 0.0748", ideal for applications requiring female contacts in straight mounting style.
963530-1
TE Connectivity
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
1924463-3
TE Connectivity's 1924463-3 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 to 18 AWG, rated for 13A current. Ideal for power applications with operating temperatures ranging from -40 to 120°C.
0462-005-20141
TE Connectivity's 0462-005-20141 is a CRIMP terminal with MACHINED contact design. It supports wire gauge up to 16 AWG, rated for 7.5A current. Ideal for applications requiring FEMALE contact gender and ROUND PIN-SOCKET style in straight mounting setup.
3030213
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; Material: COPPER; Approvals (V): UL; MIL Conformity: NO; IEC Conformity: NO;
3030514
TERMINAL BLOCK ACCESSORY; Mounting Style: STRAIGHT; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: END COVER; DIN Conformity: NO;
43031-0003
Molex 43031-0003 CONTACT features CHAIN design, PHOSPHOR BRONZE material. Supports wire sizes 24-20 AWG with 0.073" cable entry. Ideal for 43020, 43640, and 44300 applications requiring male contacts in straight mounting style.
1731110062
Molex 1731110062 is a zinc alloy backshell for FCT D-SUB size 3 connectors. It can operate in temperatures ranging from -35°C to 100°C. Mounting options include #4-40 screws, making it ideal for industrial applications.
209-120
Wago
TERMINAL BLOCK ACCESSORY; Assembly Item Name: MOUNTING ITEM; IEC Conformity: NO; DIN Conformity: NO; MIL Conformity: NO;
16-02-0069
1300580035
CONNECTOR ACCESSORY; MIL Conformity: NO; Material: POLYAMIDE; Assembly Item Name: CAP ITEM; Mounting Option-1: LOCKING; Additional Features: IP67;
3-1447221-3
TE Connectivity 3-1447221-3 is a FEMALE CONTACT with CRIMP terminal type for 16-18 AWG wires. It has a rated current of 15A and operates b/w -30 to 130 °C. Ideal for POWER applications, it features STAMPED contact design and straight mounting style.
9028240000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Approvals (V): CSA; GOST; Assembly Item Name: FERRULE-STEPPED; DIN Conformity: NO; IEC Conformity: NO;
SZE-002T-P0.3
J S T Mfg
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
M85049/128-4
CONNECTOR ACCESSORY; Material: STEEL; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
249-116
TERMINAL BLOCK ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Assembly Item Name: END PLATE; IEC Conformity: NO; Usage: TERMINAL BLOCK;
936054-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 120 Cel;
1607376
1SNK900103R0000
Abb
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
AT06-6S-CAP
Amphenol
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
1727040100
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel;
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
1727040093
CONNECTOR ACCESSORY; Assembly Item Name: SCREW ITEM; Usage: FCT D-SUB; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
172773-1
TE Connectivity's 172773-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 14 AWG and operates b/w -30°C to 105°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.082" to 0.133".
1727040102
Molex 1727040102 BACKSHELL for FCT D-SUB features 0.118-0.472" cable entry, ZINC ALLOY material, and 4-40 UNC screw mounting. Operates b/w -35 to 100°C, ideal for securing cables in electronic assemblies.
1727040150
Molex 1727040150 is a FCT series connector with a crimp terminal type. It has a max operating temperature of 155°C and a min operating temperature of -55°C. This power contact, made of copper alloy, is suitable for use in assemblies requiring a rated current of 10A and wire sizes ranging from 20 AWG to 16 AWG.
172748-1
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; DIN Conformity: NO;
1727040094
CONNECTOR ACCESSORY; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel; Maximum Cable Entry: .354 inch; Mounting Option-2: SCREW; Material: ZINC ALLOY;
1727040097
CONNECTOR ACCESSORY; Minimum Cable Entry: .118 inch; Assembly Item Name: BACKSHELL; Additional Features: SHIELDED; IEC Conformity: NO; Mounting Option-2: SCREW;
1727184121
1727040104
1727040155
1727654121
1727040159
1727090001
1727040109
1727092005
1727040132
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved