Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;
Median Price
$2.355
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Power & Signal
1+ parts
$0.172
100+ parts
-
1k+ parts
10k+ parts
Adafruit Industries
$4.538
$4.311
Arrow
Verical
Nova Conductors
$0.625
Bristol Electronics
$2.106
$1.306
$1.053
Vyrian
Rebound Electronics
Elcom Components
VNN
Semicontronic
$0.082
$0.080
Continental Prestige Electronics
$0.612
Argo Parts USA
$0.606
Modulus Dynamics
$0.694
$0.687
$0.666
Aztec Data Supply Inc.
$2.877
Advanced Electronics
Corohmni
$5.105
Perfect Parts
EMSNET (Excess)
Authorized Procurement Solutions
Robosynatics
$7.331
Lucentia Tech
Bastille Electronics
Resion (Excess)
Assembly Products 13697414 attributes and parameters. Explore more Assembly Products devices from Delphi Connection Systems
Additional Features:
Assembly Item Name:
Maximum Cable Entry:
Minimum Cable Entry:
Cable Types:
Connector Accessory Type:
Contact Gender:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Terminal Type:
13697414 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
BorgWarner Completed Acquisition of Delphi Technologies The combination of BorgWarner and Delphi Technologies is expected to strengthen BorgWarner’s electronics and power electronics products, capabilities and scale, creating a leader in electrified propulsion systems that BorgWarner believes is well-positioned to take advantage of future propulsion migration. About BorgWarner We design and manufacture the systems that define the way the world moves forward. With the world’s foremost technologists, engineers and OEMs, we’re accelerating the world’s transformation to eMobility.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
Shenzhen Socay Electronics
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL10B104KB8NNNC
Samsung Electro-mechanics
CL10B104KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has a negative tolerance of 10% and temperature coefficient of 15ppm/°C, suitable for surface mount applications in various electronic devices. With dimensions of 1.6mm x 0.8mm x 0.9mm, it operates b/w -55 to 125 °C providing stable performance in compact designs.
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
DP83848IVVX/NOPB
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
1-929939-1
TE Connectivity
CONNECTOR ACCESSORY; Manufacturer Series: 929939;
87421-0002
Molex
Molex 87421-0002 is a UL-approved CRIMP CONTACT for 26 AWG wire. FEMALE SQUARE PIN-SOCKET with 0.098" terminal length. Ideal for STRAIGHT mounting in Assembly Products.
W3P
W3P by TE Connectivity is an Assembly Product for DT SERIES. It features a Max Operating Temperature of 125°C and Min Operating Temperature of -55°C. With a Max Wire Size of 0 AWG, it is designed for POWER AND SIGNAL applications using POLYBUTYLENE TEREPHTHALATE material.
3341-1S
3m Electronic Products Division
The 3m Electronic Products Division's 3341-1S JACK SCREW is made of steel, with a straight mounting style and #4-40 screw option. It has a terminal length of 7.9 inches, ideal for assembly applications requiring secure fastening in electronic devices.
CC81L-2426-01-L
Samtec
CC81L-2426-01-L by Samtec is a female contact with crimp terminal type, suitable for ISD2 SERIES HOUSING. It features 10 finish thickness, accommodates wire sizes from 26 AWG to 24 AWG, and has a straight mounting style. Made of beryllium copper, it is ideal for various assembly applications.
33012-2001
The Molex 33012-2001 is a CRIMP terminal CONTACT for MX150 CONNECTOR, with operating temperatures from -40 to 105 °C. It supports wire sizes from 16 to 14 AWG, rated at 22A and 500V DC. The FEMALE contact has a resistance of 8 mohm, made of COPPER ALLOY for STRAIGHT mounting applications.
13663718
Delphi Connection Systems
CONNECTOR ACCESSORY;
RM16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Contact Style: ROUND PIN-SOCKET; Assembly Item Name: CONTACT; DIN Conformity: NO; Contact Gender: MALE;
4-745130-5
CONNECTOR ACCESSORY; Shielding: YES; Wire Gauge (AWG): 0; MIL Conformity: NO; DIN Conformity: NO; Maximum Wire Size: 0 AWG;
828920-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
3025163
Phoenix Contact
The Phoenix Contact 3025163 is a steel CLAMPING ITEM with EN and IEC approvals. It has a min cable entry of 0.118" and max cable entry of 0.315". Ideal for securing cables in industrial applications using M4 mounting option.
160404-2
TE Connectivity's 160404-2 is a MALE contact with STRANDED construction, suitable for DISCRETE WIRE cables. With POLYAMIDE insulator and material, it supports wire sizes from 12 to 10 AWG and operates up to 105°C. Ideal for applications requiring a 0.15-0.25 inch cable entry.
776364-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 125 Cel;
16-02-0086
194200002
Molex 194200002 is a female contact with crimp terminal type, suitable for 19418 series receptacle housing. It has a finish thickness of 75 units and supports wire sizes from 22 AWG to 18 AWG. The contact design is strip made of copper alloy material with a length of 0.295 inch, ideal for straight mounting applications.
3231
Heyco Products
CONNECTOR ACCESSORY; Material: NYLON66; Assembly Item Name: CORDGRIP; Maximum Cable Entry: .45 inch; Maximum Operating Temperature: 115 Cel; Minimum Cable Entry: .17 inch;
0-0880810-1
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; Usage: 282080 or 282104 HOUSING; Maximum Wire Size: 0 AWG; IEC Conformity: NO;
M85049/128-4
CONNECTOR ACCESSORY; Material: STEEL; Minimum Operating Temperature: -65 Cel; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 200 Cel; Wire Gauge (AWG): 0;
G125-0010005
Harwin Plc
G125-0010005 by Harwin PLC is a female contact with round pin-socket style, made of beryllium copper. It has a rated current of 2.8A and can handle up to 450V AC/DC voltage. With a terminal length of 0.079 inch, it is ideal for signal applications requiring crimp terminals in assemblies with 0.031 inch cable entry.
1053002100
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
13697414
Aptiv
Aptiv 13697414 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0551-0.0748 inch cable entry. Ideal for automotive wiring harness assemblies due to its precise crimping and compatibility with specified cable types.
13697415
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Contact Gender: FEMALE; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: GOLD; Maximum Cable Entry: .0945 inch;
Aptiv 13697415 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has FEMALE contact gender with 0.0748" to 0.0945" cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and compatibility with specified cable types.
13697409
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: CONTACT; Material: COPPER ALLOY; DIN Conformity: NO; Minimum Cable Entry: .075 inch;
Aptiv 13697409 CONTACT is a MALE CRIMP terminal for FLRY-B cables. Made of COPPER ALLOY, it has 0.075-0.094 inch cable entry. Ideal for automotive wiring harness assembly due to its precise crimping and durable material.
13697408
CONNECTOR ACCESSORY; Cable Types: FLRY-B; IEC Conformity: NO; Assembly Item Name: CONTACT; Maximum Cable Entry: .0748 inch; Minimum Cable Entry: .0551 inch;
Aptiv 13697408 CONTACT features CRIMP terminal type for FLRY-B cables. Made of COPPER ALLOY, it has 0.0551-0.0748 inch cable entry range. Ideal for applications requiring MALE contact gender in Assembly Products category.
13697410
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; Maximum Cable Entry: .118 inch; DIN Conformity: NO; Additional Features: CONTACT FINISH: NICKEL;
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; MIL Conformity: NO; Minimum Cable Entry: .106 inch; Maximum Cable Entry: .118 inch; DIN Conformity: NO;
13697411
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Minimum Cable Entry: .0551 inch; Cable Types: FLRY-B; Terminal Type: CRIMP; DIN Conformity: NO;
13697412
CONNECTOR ACCESSORY; Contact Gender: MALE; Assembly Item Name: CONTACT; Material: COPPER ALLOY; Minimum Cable Entry: .0748 inch; MIL Conformity: NO;
13697413
CONNECTOR ACCESSORY; Minimum Cable Entry: .106 inch; IEC Conformity: NO; Additional Features: CONTACT FINISH: GOLD; Maximum Cable Entry: .118 inch; Cable Types: FLRY-B;
13697416
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Cable Types: FLRY-B; Contact Gender: FEMALE; Minimum Cable Entry: .106 inch; Terminal Type: CRIMP;
13697418
CONNECTOR ACCESSORY; Material: COPPER ALLOY; DIN Conformity: NO; Additional Features: CONTACT FINISH: NICKEL; MIL Conformity: NO; IEC Conformity: NO;
13697419
CONNECTOR ACCESSORY; Minimum Cable Entry: .106 inch; Maximum Cable Entry: .118 inch; Terminal Type: CRIMP; Assembly Item Name: CONTACT; Cable Types: FLRY-B;
CONNECTOR ACCESSORY; Cable Types: FLRY-B; Terminal Type: CRIMP; IEC Conformity: NO; Minimum Cable Entry: .106 inch; Maximum Cable Entry: .118 inch;
13697417
CONNECTOR ACCESSORY; DIN Conformity: NO; Contact Gender: FEMALE; Terminal Type: CRIMP; MIL Conformity: NO; IEC Conformity: NO;
CONNECTOR ACCESSORY; Material: COPPER ALLOY; Additional Features: CONTACT FINISH: GOLD; IEC Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO;
CONNECTOR ACCESSORY; Terminal Type: CRIMP; IEC Conformity: NO; Maximum Cable Entry: .0748 inch; Material: COPPER ALLOY; MIL Conformity: NO;
CONNECTOR ACCESSORY; DIN Conformity: NO; Minimum Cable Entry: .0748 inch; MIL Conformity: NO; Contact Gender: FEMALE; IEC Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved