Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; Assembly Item Name: SCREW ITEM; Usage: FCT D-SUB; DIN Conformity: NO; IEC Conformity: NO; MIL Conformity: NO;
Median Price
$0.661
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Newark
1+ parts
$0.068
100+ parts
1k+ parts
10k+ parts
-
Bürklin Elektronik
$0.520
$0.330
Arrow
$0.769
$0.587
$0.538
$0.537
Element14
$1.430
$1.240
$1.160
Distrelec
$2.526
$2.385
$1.398
Verical
$0.589
$0.540
$0.539
TTI Europe
$0.824
Chip1Stop
TTI
$0.733
$0.569
Farnell
$0.502
Compona
Powell Electronics
$0.470
$0.430
Digiode
$0.494
Nova Conductors
$0.597
VNN
Rutronik
$0.406
Vyrian
IBS Electronics
$0.475
$0.438
NAC Semi
$0.780
$0.720
TME
$0.696
$0.609
Greenchips
Semicontronic
$0.442
$0.431
$0.429
Corphita
$0.468
Continental Prestige Electronics
$0.585
Argo Parts USA
$0.579
Andel Nordic
$3.434
$3.296
Aztec Data Supply Inc.
$6.940
Eastek
$0.460
Assy Fe
Abacus Technologies
Authorized Procurement Solutions
Netroflash
$0.568
$0.556
Infinite Electronics LLP (Excess)
Robosynatics
GreenTree Electronics
Assembly Products 1727040093 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-1:
Mounting Option-2:
Usage:
PCN Packaging - Mult Devs Quantity 07/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Daco Semiconductor
Siemens
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Rochester Electronics
1N4148WSF-7
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
1554216004
Molex
WIRE AND CABLE;
08-50-0108
Molex 08-50-0108 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 26-22 AWG wire sizes with 0.065" cable entry. Suitable for straight mounting in assembly products.
13663723
Aptiv
CONNECTOR ACCESSORY;
WM-12S
TE Connectivity
TE Connectivity's WM-12S, part of Assembly Products, is designed for DTM SERIES applications. With a temperature range of -55 to 125 °C, it accommodates wires up to 0 AWG. Made of POLYBUTYLENE TEREPHTHALATE, it serves as a POWER AND SIGNAL WEDGE ITEM.
4-745287-7
TE Connectivity 4-745287-7 CONTACT features SOLDER terminals, BRASS material, and SIGNAL design. With a max wire size of 0 AWG and rated current of 3.1 A, it is ideal for MALE connectors in applications requiring a temp range from -55 to 105 °C.
M23053/5-111-9
3m Electronic Products Division
ASSEMBLY ITEMS; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO; MIL Conformity: NO; Construction: SINGLE WALL; IEC Conformity: NO;
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
SPAL-001T-P0.5
J S T Mfg
SPAL-001T-P0.5 by J S T Mfg is a UL approved PAL connector with crimp terminal type, suitable for 26-22 AWG wires. It has a rated current of 3A and contact resistance of 25 mohm. Ideal for applications requiring male contact gender in straight mounting style at temperatures ranging from -25 to 85 °C.
WP-2P
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
AWP-4S
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: WEDGE LOCK; Usage: ATP06; DIN Conformity: NO; Material: POLYETHYLENE;
1727040100
Molex 1727040100 BACKSHELL for FCT D-SUB features 0.118" to 0.335" cable entry, ZINC ALLOY material, and -35°C to 100°C operating temp. Mounting options include SCREW or 4-40 UNC. Ideal for securing cables in electronic assemblies.
5-66506-3
TE Connectivity 5-66506-3 is a male signal contact with brass material. It has a finish thickness of 30, supports wire gauge up to 20 AWG, and operates b/w -55°C to 105°C. Ideal for applications requiring crimp terminals with 0.05" to 0.06" cable entry.
AW3P
5205817-1
TE Connectivity 5205817-1 is a hardware female screwlock for metal shell or all plastic connectors. It supports max wire size of 0 AWG, made of steel, and mounts with #4-40 UNC screws. Ideal for secure assembly in various applications.
AWP-4P
CONNECTOR ACCESSORY; DIN Conformity: NO; Usage: ATP06; MIL Conformity: NO; Material: POLYETHYLENE; IEC Conformity: NO;
216-201
Wago
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; DIN Conformity: NO; IEC Conformity: NO; Maximum Wire Size: 22 AWG; Assembly Item Name: FERRULE;
SPH-002T-P0.5L
SPH-002T-P0.5L by J S T Mfg is a PAD SERIES CONNECTOR with CRIMP terminals, rated for 3A at 250V AC/DC. It has a contact resistance of 20 mohm and operates b/w -25°C to 85°C. Ideal for applications requiring FEMALE contacts with wire sizes ranging from 28 AWG to 24 AWG.
08-56-0110
Molex 08-56-0110 CONTACT features CRIMP terminals for 30-22 AWG wires. Made of BRASS, it has a 0.186" length and 0.062" cable entry. Ideal for STRAIGHT mounting in Assembly Products applications.
793-5503
TERMINAL BLOCK ACCESSORY;
202K132-25/86-0
TE Connectivity's 202K132-25/86-0, an Assembly Product, features a min cable entry of 5.9" and max operating temperature of 150°C. With a max wire size of 0 AWG, it is ideal for applications requiring a durable ELASTOMER material with a wide cable entry range up to 15".
02-06-1103
Molex 02-06-1103 contact features brass material, crimp terminal type, and round pin-socket design. Suitable for applications requiring female contact gender with wire sizes ranging from 24 AWG to 18 AWG. Ideal for assembly products with a min cable entry of 0.06" and max of 1.52".
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1727040096
Molex 1727040096 BACKSHELL is an Assembly Product for FCT D-SUB usage. Features include Zinc Alloy material, 0.118" to 0.374" cable entry, -35°C to 100°C operating temperature range. Mounting options: 4-40 UNC screw.
1727040098
Molex 1727040098 BACKSHELL is a zinc alloy assembly product for FCT D-SUB usage. It supports cable entry from 0.118" to 0.335", with operating temperatures ranging from -35°C to 100°C. Mounting options include 4-40 UNC screws, making it versatile for various applications.
CONNECTOR ACCESSORY; DIN Conformity: NO; MIL Conformity: NO; IEC Conformity: NO; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel;
1727040095
Molex 1727040095 BACKSHELL is an Assembly Product for FCT D-SUB usage. Made of ZINC ALLOY, it has a min cable entry of 0.118" and max temp of 100°C. Mounting options include SCREW (4-40 UNC).
172773-1
TE Connectivity's 172773-1 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 14 AWG and operates b/w -30°C to 105°C. Ideal for applications requiring female contact gender, with cable entry ranging from 0.082" to 0.133".
1727040102
Molex 1727040102 BACKSHELL for FCT D-SUB features 0.118-0.472" cable entry, ZINC ALLOY material, and 4-40 UNC screw mounting. Operates b/w -35 to 100°C, ideal for securing cables in electronic assemblies.
1727040150
Molex 1727040150 is a FCT series connector with a crimp terminal type. It has a max operating temperature of 155°C and a min operating temperature of -55°C. This power contact, made of copper alloy, is suitable for use in assemblies requiring a rated current of 10A and wire sizes ranging from 20 AWG to 16 AWG.
172748-1
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: SEALING ITEM; MIL Conformity: NO; DIN Conformity: NO;
1727040094
CONNECTOR ACCESSORY; Usage: FCT D-SUB; Minimum Operating Temperature: -35 Cel; Maximum Cable Entry: .354 inch; Mounting Option-2: SCREW; Material: ZINC ALLOY;
1727040097
CONNECTOR ACCESSORY; Minimum Cable Entry: .118 inch; Assembly Item Name: BACKSHELL; Additional Features: SHIELDED; IEC Conformity: NO; Mounting Option-2: SCREW;
1727040099
1727184121
1727040104
1727040155
1727654121
1727040159
1727090001
1727040109
1727092005
1727040103
CONNECTOR ACCESSORY; Mounting Option-1: 4-40 UNC; DIN Conformity: NO; Usage: D-SUB CONNECTOR; Material: ZINC ALLOY; Assembly Item Name: BACKSHELL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved