Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 02-09-2166 is a 0.093 Series Housing with a finish thickness of 100. It features a crimp terminal type and chain contact design, suitable for male contacts in straight mounting style. Ideal for wire sizes ranging from 20 AWG to 14 AWG, made of phosphor bronze material with round pin-socket contact style.
Median Price
$0.066
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Newark
1+ parts
$0.128
100+ parts
$0.077
1k+ parts
10k+ parts
$0.060
Verical
-
$0.054
DigiKey
Chip1Stop
$0.053
Farnell
$0.071
Master Electronics
TTI Europe
$0.046
Mouser Electronics
$0.069
TTI
RS (Exports)
$0.079
$0.067
Vyrian
TestEquity
$0.050
Digiode
$0.059
IBS Electronics
$0.051
Corphita
$0.056
Perfect Parts
EMSNET (Excess)
Argo Parts USA
Aranea Global
Specifically designed for 0.093 series housing, ensuring compatibility and easy installation.
A durable finish thickness of 100 ensures long-lasting performance and resistance to wear and tear.
Crimp terminals provide a secure and reliable connection, reducing the risk of electrical failures.
Chain contact design provides a reliable and stable electrical connection, minimizing signal loss.
Supports a minimum wire size of 20 AWG, allowing for use with a wide range of wire gauges.
A maximum wire size of 14 AWG ensures compatibility with larger wire gauges, increasing versatility.
Male contacts are commonly used in electronics for a reliable and secure connection.
Straight mounting style provides a simple and easy installation process without the need for additional adjustments.
The round pin-socket contact style ensures a stable and secure connection, reducing the risk of signal interference.
Phosphor bronze material offers excellent conductivity and durability, ensuring long-term performance.
The 0.24 inch terminal length provides sufficient contact area for a reliable electrical connection.
Assembly Products 02-09-2166 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Vishay Intertechnology
Vishay Intertechnology's LL4148 diode features a max reverse recovery time of 0.004 us, forward voltage of 1 V, and output current of 0.15 A. Ideal for rectification applications in electronics due to its high efficiency and low power dissipation capabilities.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Continental Device India
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
Kec
Rfe International
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
AWM-12P
Amphenol
CONNECTOR ACCESSORY;
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
292
Keystone Electronics
776463-1
TE Connectivity
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Material: POLYBUTYLENE TEREPHTHALATE;
205089-1
TE Connectivity's 205089-1 CONTACT is a male signal round pin-socket designed for AMPLIMITE usage. It features a copper alloy construction, crimp terminal type, and can handle wire sizes from 24 to 20 AWG with a rated current of 7.5 A. Operating temperatures range from -55 to 125°C, making it suitable for various assembly applications.
T3930102001-000
CONNECTOR ACCESSORY; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 125 Cel; Design: POWER AND SIGNAL; Maximum Wire Size: 0 AWG;
CP-MSTB
Phoenix Contact
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: CODING ITEM; MIL Conformity: NO;
AW12S
AW12S by Amphenol is an assembly product designed for AT series connectors. It has a temperature range of -55°C to 125°C, with polyethylene material. Supports wire sizes from 20 AWG to 14 AWG, making it ideal for various industrial applications.
AWM-6P
281934-4
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
350537-6
TE Connectivity's 350537-6 CONTACT features crimp terminal type, 600V rated voltage, and 19A rated current. Ideal for UNIVERSAL MATE-N-LOK II applications with stranded construction and phosphor bronze material.
17790000021
Harting Electronics & Kg
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODING ITEM; Material: THERMOPLASTIC; IEC Conformity: NO; MIL Conformity: NO;
1-104480-7
TE Connectivity 1-104480-7 is a crimp terminal with 300V AC/DC rating, suitable for discrete wire applications. Featuring copper alloy construction, it has a contact resistance of 12 mΩ and can accommodate wire sizes from 26 to 22 AWG. With approvals from CSA and UL, this CONTACT is designed for power and signal connections in various assemblies.
39-00-0217
Molex
Molex 39-00-0217 is a crimp terminal with square pin-socket contact design. It is used in 5557, 30067, 43760, 44516, and 42474 series housings for female contacts. Made of phosphor bronze with a finish thickness of 100 units, it accommodates up to 16 AWG wire sizes in straight mounting style applications.
SZE-002T-P0.3
J S T Mfg
SZE-002T-P0.3 by J S T Mfg is a CRIMP terminal CONTACT for 28-24 AWG wires with 0.0299-0.0472 inch cable entry. It features FEMALE contact gender, STRAIGHT mounting style, and is made of COPPER ALLOY. Ideal for assembly products requiring precise wire connections in various applications.
3-640252-1
TE Connectivity 3-640252-1 is a signal contact with crimp terminal type, rated for 250V AC/DC and 6.5A current. It has a brass construction, CSA and UL approvals, suitable for SL-156 housing applications at temperatures ranging from -55 to 105°C.
5011933000
Molex 5011933000 is a crimp terminal contact designed for signal applications. It supports wire sizes from 32 AWG to 28 AWG and is made of phosphor bronze. Its female gender makes it suitable for various assembly products in the electronics industry.
1060-16-1222
TE Connectivity 1060-16-1222 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 12 AWG and rated current of 13 A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55°C to 125°C.
936054-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 120 Cel;
MINI-SSHL-002T-P0.2
MINI-SSHL-002T-P0.2 by J S T Mfg is a UL approved assembly product with crimp terminals, stamped contact design, and bellowed contact style. It is used in GH Series connectors for 30-26 AWG wires, rated at 1A and 50V DC/AC. Operating temperature ranges from -25 to 85°C making it ideal for various electrical applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
02-09-1104
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
02-09-1102
Molex 02-09-1102 (0.093 Series Housing) features crimp terminals, chain contact design, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 20 to 14 AWG. Suitable for straight mounting with round pin-socket contact style.
02-09-2101
Molex 02-09-2101 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG. Great for assembly products with a finish thickness of 50.
02-09-1117
Molex 02-09-1117 is a 0.093 Series Housing with CRIMP terminals for 22-18 AWG wires. Features FEMALE contact design, ROUND PIN-SOCKET style, made of BRASS. Ideal for straight mounting applications in assembly products.
02-09-2103
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: MALE; Finish Thickness: 50; Terminal Length: .253 inch; Assembly Item Name: CONTACT;
02-09-2118
Molex 02-09-2118 is a male contact with round pin-socket design, made of brass. It supports wire sizes from 22 AWG to 18 AWG and has a terminal length of 0.24 inch. Ideal for use in 0.093/(2.36) series housing assemblies requiring crimp terminals with straight mounting style.
02-09-5100
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Style: SQ PIN-SKT; DIN Conformity: NO; Assembly Item Name: CONTACT; Contact Gender: FEMALE;
02-09-5106
Molex 02-09-5106 is a female contact with brass material, suitable for 0.093/(2.36) series housing. Features crimp terminal type, round pin/socket contact style, and accepts wire sizes from 20 AWG to 14 AWG. Ideal for applications requiring a straight mounting style and a min cable entry of 1.65" up to max of 4.06".
02-09-1134
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Terminal Length: .53 inch; MIL Conformity: NO; Mounting Style: STRAIGHT; Finish Thickness: 100;
02-09-1205
The Molex 02-09-1205 is a 0.093 Series Housing contact with a finish thickness of 20. It features a CRIMP terminal type and CHAIN contact design, suitable for applications requiring FEMALE contacts with STRAIGHT mounting style. This assembly product supports wire sizes from 20 AWG to 14 AWG and is made of PHOSPHOR BRONZE material.
02-09-8103
CONNECTOR ACCESSORY; Minimum Wire Size: 22 AWG; Terminal Length: .24 inch; Maximum Wire Size: 18 AWG; Finish Thickness: 20; Terminal Type: CRIMP;
02-09-8109
CONNECTOR ACCESSORY; Material: BRASS; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; Terminal Type: CRIMP;
02-09-2611
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .28 inch;
02-09-1615
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; IEC Conformity: NO; Minimum Wire Size: 18 AWG;
02-09-8108
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 18 AWG; Material: BRASS; MIL Conformity: NO; Finish Thickness: 20;
02-09-2159
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; Maximum Wire Size: 18 AWG; Assembly Item Name: CONTACT; Terminal Type: CRIMP;
02-09-2136
CONNECTOR ACCESSORY; Contact Design: CHAIN; Minimum Wire Size: 24 AWG; Terminal Type: CRIMP; Maximum Wire Size: 22 AWG; IEC Conformity: NO;
02-09-2143
CONNECTOR ACCESSORY; MIL Conformity: NO; Terminal Type: CRIMP; DIN Conformity: NO; Contact Design: LOOSE; Contact Style: ROUND PIN-SOCKET;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved