Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Mounting Option-2: SCREW; Material: METAL;
Median Price
$6.802
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$4.046
100+ parts
-
1k+ parts
10k+ parts
TTI
Mouser Electronics
$9.630
$7.670
$6.390
Newark
$10.660
$8.860
$8.300
Farnell
$10.970
$7.400
$7.070
Element14
$18.590
$13.100
$11.240
Verical
Chip1Stop
$6.570
$5.170
Master Electronics
$5.600
$4.770
$4.540
Powell Electronics
$5.390
$4.610
Nova Conductors
$7.095
Digiode
$8.434
Vyrian
IBS Electronics
$6.003
$5.147
TME
$6.144
$4.878
$6.040
$5.140
VNN
Aztec Data Supply Inc.
$2.049
Semicontronic
$5.580
$5.440
$5.413
Continental Prestige Electronics
$6.953
Corphita
$7.990
Andel Nordic
$8.230
$7.901
Argo Parts USA
Robosynatics
$4.781
Assembly Products 1731110081 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Option-2:
Usage:
PCN Packaging - Mult Devs Packaging 27/Aug/2021 Mult Devs Packaging Retraction 09/Feb/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931Z-5.0RPG
Onsemi
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
Philips Components
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
Panjit International
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Fagor Electronica S Coop
N3505-2B
3m Electronic Products Division
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -55 Cel; Approvals (V): UL; IEC Conformity: NO;
39-00-0040
Molex
Molex 39-00-0040 CONTACT features CRIMP terminals for 24-18 AWG wires, 0.051-0.122 inch cable entry, and BRASS material. Ideal for 5559, 30068, 42475 SERIES HOUSING applications with SQUARE PIN-SOCKET contact design.
350689-1
Tyco Electronics Amp
CONNECTOR ACCESSORY; Rated Voltage: 600 V; Rated Current: 19 A; Maximum Cable Entry: .1 inch; Design: POWER; Minimum Cable Entry: .04 inch;
281934-4
TE Connectivity
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; IEC Conformity: NO; MIL Conformity: NO; Material: LSR; Maximum Operating Temperature: 130 Cel;
AT13-204-2005-SR
Amphenol
CONNECTOR ACCESSORY;
1SNK900103R0000
Abb
TERMINAL BLOCK ACCESSORY; Insulator Material: POLYAMIDE; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
1SNK900001R0000
TE Connectivity's 1SNK900001R0000 is a UL-approved terminal block with insulator material POLYAMIDE. It has a wide operating temperature range (-55 to 110 °C) and supports wire sizes up to 0 AWG. Ideal for various assembly applications requiring secure wire connections.
61030012010010
Harting Electronics & Kg
Assembly Items;
M23053/5-108-0
Alpha Wire
ASSEMBLY ITEMS; MIL Conformity: NO; IEC Conformity: NO; Assembly Item Name: TAPER SLEEVE; DIN Conformity: NO;
87421-0002
Molex 87421-0002 is a UL-approved CRIMP CONTACT for 26 AWG wire. FEMALE SQUARE PIN-SOCKET with 0.098" terminal length. Ideal for STRAIGHT mounting in Assembly Products.
ZX360-B-10S-UNIT(30)
Hirose Electric
AWM-4S
1534805-1
TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.
42815-0012
Molex 42815-0012 CONTACT features CRIMP terminal for 12-10 AWG wires. Made of COPPER ALLOY, it has 0.209" cable entry and suits FEMALE connectors in STRAIGHT mount. Ideal for applications requiring durable bellowed-type contacts with 30 finish thickness.
962835-3
TE Connectivity's 962835-3 is a FEMALE contact assembly product with 0.094" min cable entry and 2.62 mm² cross section area for 17-13 AWG wires. Ideal for DISCRETE WIRE applications, it features STRAIGHT mounting style and PHOSPHOR BRONZE material with 0.146" max cable entry.
39-00-0218
The Molex 39-00-0218 CONTACT is a FEMALE CRIMP terminal with SQUARE PIN-SOCKET style, ideal for 16 AWG wires. Made of PHOSPHOR BRONZE, it has a 0.217" length and STRAIGHT mounting style. Perfect for various Assembly Products applications.
33012-2003
Molex 33012-2003 is a crimp terminal for MX150 connectors with max temp of 105°C and min temp of -40°C. It supports 22 AWG wire, rated at 10A current, and has female contact gender. The copper alloy material ensures low contact resistance of 8 mΩ, suitable for applications requiring straight mounting style and up to 500V DC voltage.
DF3-2428SC
DF3-2428SC by Hirose Electric features crimp terminal type, 28-24 AWG wire size compatibility, and 3A rated current. Ideal for discrete wire cable types in applications requiring female contact gender and straight mounting style.
1-104480-3
TE Connectivity 1-104480-3 is a crimp terminal with a rated voltage of 300V and a max operating temperature of 105°C. It is commonly used in power and signal applications, with approvals from CSA and UL.
0460-204-0490
TE Connectivity's 0460-204-0490 contact features crimp terminal type, machined contact design, and can handle wire gauge up to 6 AWG. With a rated current of 100A, it is ideal for applications requiring male gender contacts in straight mounting style with round pin/socket contact design.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
1731110062
CONNECTOR ACCESSORY; Usage: FCT D-SUB, SIZE 3; Mounting Option-1: #4-40; Assembly Item Name: BACKSHELL; DIN Conformity: NO; Mounting Option-2: SCREW;
1731110065
CONNECTOR ACCESSORY; Maximum Cable Entry: .591 inch; Minimum Operating Temperature: -35 Cel; Material: ZINC ALLOY; Mounting Option-1: 4-40 UNC; DIN Conformity: NO;
1731110086
Molex 1731110086 backshell for FCT D-SUB, SIZE 1 with 0.197" min and 0.315" max cable entry. Made of ZINC ALLOY, it can withstand -35 to 100°C. Mounting option includes SCREW for secure installation in various applications.
1731120208
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Wire Size: 22 AWG; Finish Thickness: 51.18; Contact Gender: MALE; Terminal Type: CRIMP;
1731120300
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Mounting Option-2: SCREW; Mounting Option-1: 4-40 UNC;
1731120209
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: COPPER ALLOY; Terminal Type: CRIMP; Minimum Wire Size: 24 AWG; Maximum Wire Size: 20 AWG;
1731120214
The Molex 1731120214 contact features a finish thickness of 7.87, crimp terminal type, and machined contact design. Ideal for applications requiring female contacts with straight mounting style and copper alloy material. Supports wire sizes from 24 AWG to 20 AWG in various assembly products.
1731110059
1731120380
CONNECTOR ACCESSORY; Mounting Option-2: SCREW; Mounting Option-1: #4-40 UNC; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Usage: FCT D-SUB;
1731120200
1731120215
CONNECTOR ACCESSORY; Rated Current: 7.5 A; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH - GOLD OVER NICKEL; Mounting Style: STRAIGHT; Usage: FCT D-SUB;
1731120342
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Material: STEEL; Mounting Option-2: SCREW;
1731120062
1731120175
1731110061
CONNECTOR ACCESSORY; Minimum Operating Temperature: -35 Cel; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Mounting Option-2: SCREW;
1731110063
CONNECTOR ACCESSORY; Assembly Item Name: BACKSHELL; Mounting Option-2: SCREW; MIL Conformity: NO; Mounting Option-1: 4-40 UNC; Maximum Operating Temperature: 100 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved