Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1731120215 CONTACT features CRIMP terminal type, BRASS material, and MACHINED contact design. Ideal for FCT D-SUB applications with wire sizes ranging from 24 to 20 AWG. Operating temperature range from -55°C to 130°C makes it suitable for various industrial environments.
Median Price
$0.836
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Arrow
1+ parts
$0.625
100+ parts
$0.566
1k+ parts
$0.521
10k+ parts
-
Mouser Electronics
$1.410
$1.020
$0.800
$0.720
DigiKey
$1.021
$0.868
$0.814
Element14
$2.260
$1.240
$1.130
$0.971
TTI
$0.699
$0.665
Farnell
$0.911
$0.641
Powell Electronics
$0.760
$0.530
$0.520
Verical
$0.638
Digiode
$0.594
Nova Conductors
$0.655
VNN
IBS Electronics
$0.757
$0.631
$0.575
TME
$0.980
$0.770
Vyrian
Corphita
$0.562
Argo Parts USA
$0.635
Continental Prestige Electronics
$0.642
Andel Nordic
$8.572
$8.229
Netroflash
$0.622
$0.609
This product is specifically designed for use in FCT D-SUB applications, ensuring compatibility and optimal performance.
The finish thickness of 31 ensures durability and longevity, making this product a reliable choice for long-term use.
The crimp terminal type allows for secure and reliable connections, reducing the risk of disconnections or faulty wiring.
With a maximum operating temperature of 130°C, this product can withstand high temperatures, making it suitable for a wide range of applications.
The low minimum operating temperature of -55°C ensures that this product can perform reliably even in cold environments.
Constructed from brass, this product offers excellent conductivity and durability, ensuring optimal performance and longevity.
Assembly Products 1731120215 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Maximum Operating Temperature:
Minimum Operating Temperature:
Rated Current:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
PCN Packaging - Mult Devs Quantity 07/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS360T3G
Onsemi
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
EU2B-YS303C
Idec
ROTARY SWITCH;
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
Surge Components
M24308/2-1F
Itt Cannon
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Filter Feature: NO;
LM555CMX
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
50058-8000
Molex
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
2858496
Phoenix Contact
CONNECTOR ACCESSORY;
1SNK708911R0000
TE Connectivity
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
0462-201-1631
TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.
770854-3
TE Connectivity's 770854-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17 A, it is ideal for applications requiring female gender contacts with round pin-socket style in straight mounting.
3-1447221-4
TE Connectivity 3-1447221-4 is a female crimp contact with stamped design for power applications. It supports wire gauge up to 20 AWG, rated at 6A current. Operating temperature ranges from -30°C to 130°C, suitable for assemblies requiring 0.063"-0.075" cable entry.
FMK1G
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
590
Keystone Electronics
Keystone Electronics 590 is a male contact with compression style, made of steel. It features right angle mounting and solder terminal type, with a length of 0.12". Ideal for assembly products requiring durable connections in tight spaces.
WM-3S
The TE Connectivity WM-3S is an assembly product designed for DTM SERIES applications. It features a temperature range of -55 to 125°C, suitable for power and signal designs. With a max wire size of 0 AWG and made from polybutylene terephthalate, it is ideal for various electrical connections.
RC16M23K
Esterline Technologies
CONNECTOR ACCESSORY; Rated Current: 13 A; Rated AC Voltage: 220 V; Assembly Item Name: CONTACT; Contact Resistance: 2.5 mohm; Contact Gender: FEMALE;
WM-2PA
CONNECTOR ACCESSORY; Material: POLYBUTYLENE TEREPHTHALATE; Design: POWER AND SIGNAL; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel;
08-70-1030
Molex 08-70-1030 CONTACT features CRIMP terminal type, suitable for 24-18 AWG wires. With 0.051-0.126 inch cable entry, it's ideal for FEMALE connectors in STRAIGHT mounting style. Made of BRASS with SQUARE PIN-SOCKET contact style, it has a 0.197 inch terminal length for secure connections.
39-00-0380
Assembly Items;
770854-1
TE Connectivity's 770854-1 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 8A current. Ideal for applications requiring female contact gender and straight mounting style with round pin-socket contact design.
1375819-1
TE Connectivity's 1375819-1 CONTACT features CRIMP terminal type, rated voltage of 250V, and wire gauge of 22 AWG. Ideal for SIGNAL design applications with a max operating temperature of 105°C and rated current of 4A.
1313600000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY;
M24308/26-2F
CONNECTOR ACCESSORY; DIN Conformity: NO; IEC Conformity: NO; Assembly Item Name: SCREWLOCK; Material: STEEL; MIL Conformity: YES;
248-501
Wago
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: MARKING ITEM;
09330006102
Harting Electronics & Kg
09330006102 by Harting Electronics & Kg is a HAN E CONNECTOR with CRIMP terminals for 14 AWG wire. It has approvals for IEC 60664-1 and IEC 61984, rated at 16 A current with male contact gender. The CONTACT features copper alloy material, 1 mohm resistance, RND PIN-SKT style, and STRAIGHT mounting suitable for various assembly applications.
13711546
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; DIN Conformity: NO; Terminal Type: CRIMP; MIL Conformity: NO; Maximum Cable Entry: .063 inch;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
1731110081
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Mounting Option-2: SCREW; Material: METAL;
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
1731110062
CONNECTOR ACCESSORY; Usage: FCT D-SUB, SIZE 3; Mounting Option-1: #4-40; Assembly Item Name: BACKSHELL; DIN Conformity: NO; Mounting Option-2: SCREW;
1731110065
CONNECTOR ACCESSORY; Maximum Cable Entry: .591 inch; Minimum Operating Temperature: -35 Cel; Material: ZINC ALLOY; Mounting Option-1: 4-40 UNC; DIN Conformity: NO;
1731110086
Molex 1731110086 backshell for FCT D-SUB, SIZE 1 with 0.197" min and 0.315" max cable entry. Made of ZINC ALLOY, it can withstand -35 to 100°C. Mounting option includes SCREW for secure installation in various applications.
1731120208
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Wire Size: 22 AWG; Finish Thickness: 51.18; Contact Gender: MALE; Terminal Type: CRIMP;
1731120300
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Mounting Option-2: SCREW; Mounting Option-1: 4-40 UNC;
1731120209
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Material: COPPER ALLOY; Terminal Type: CRIMP; Minimum Wire Size: 24 AWG; Maximum Wire Size: 20 AWG;
1731120214
The Molex 1731120214 contact features a finish thickness of 7.87, crimp terminal type, and machined contact design. Ideal for applications requiring female contacts with straight mounting style and copper alloy material. Supports wire sizes from 24 AWG to 20 AWG in various assembly products.
1731110059
1731120380
CONNECTOR ACCESSORY; Mounting Option-2: SCREW; Mounting Option-1: #4-40 UNC; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Usage: FCT D-SUB;
1731120200
1731120342
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Material: STEEL; Mounting Option-2: SCREW;
1731120062
1731120175
1731110061
CONNECTOR ACCESSORY; Minimum Operating Temperature: -35 Cel; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Mounting Option-2: SCREW;
1731120717
CONNECTOR ACCESSORY; Contact Gender: MALE; Maximum Wire Size: 20 AWG; Material: BRASS; Contact Style: RND PIN-SKT; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved