Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 1731120209 CONTACT features machined CRIMP terminals with copper alloy material. Suitable for Assembly Products, it has a finish thickness of 7.87mm and accommodates wire sizes from 24 AWG to 20 AWG. Ideal for applications requiring female contact gender and straight mounting style with round pin-socket design.
Median Price
$2.480
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.788
1k+ parts
$1.519
10k+ parts
$1.424
Nova Conductors
$1.022
-
Digiode
$1.900
VNN
Vyrian
Aranea Global
$1.002
$0.961
Continental Prestige Electronics
Argo Parts USA
Andel Nordic
$1.318
$1.265
Semicontronic
$1.510
$1.472
$1.465
Corphita
$1.800
Aztec Data Supply Inc.
$7.382
Thicker finish provides durability and sturdy construction, ensuring the product will last long and withstand wear and tear.
Crimp terminals provide a strong and reliable connection, reducing the risk of loose connections or failures.
Machined contact design ensures precise and consistent performance, resulting in reliable and stable connections.
Support for smaller wire sizes allows for flexibility in connecting various types of wires in different applications.
Capability to accommodate larger wire sizes ensures compatibility with a wide range of wire gauges, enhancing versatility.
Female contacts are commonly used for their secure mating with male connectors, providing a reliable connection.
Straight mounting style offers a simple and straightforward installation process, making it easy to integrate into different systems.
Round pin socket contact style provides a stable and secure connection, minimizing the risk of signal loss or interference.
Copper alloy material offers excellent conductivity and corrosion resistance, ensuring efficient signal transmission and long-term durability.
Assembly Products 1731120209 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
PCN Packaging - Mult Devs Quantity 07/Jun/2021
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
SMBJ18CA
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Sangdest Microelectronics (Nanjing)
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
Synsemi
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
LM358N
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1010-009-0206
TE Connectivity
CONNECTOR ACCESSORY;
1-206062-4
TE Connectivity's 1-206062-4 CLAMP KIT features Shell Size 11, accommodates up to 0 AWG wire size, and has a max cable entry of 0.329". Ideal for straight mounting with polyethylene material, it uses a 5/8-24 UNEF-2B screw for installation in various assembly products.
776463-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel; Maximum Wire Size: 0 AWG; Material: POLYBUTYLENE TEREPHTHALATE;
SDN-21T-P1.5
SDN-21T-P1.5 by J S T Mfg is a CRIMP terminal connector with approvals from CSA, TUV, and UL. It is designed for power and signal applications with a rated current of 7A, suitable for wire sizes ranging from 22 AWG to 18 AWG. This connector has a max operating temperature of 85°C and can handle up to 250V AC/DC.
02-09-2116
Molex
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
50058-8000
The Molex 50058-8000 is a female crimp contact with bellowed design, made of phosphor bronze. It has a finish thickness of 35 and supports wire sizes from 32 to 28 AWG. Ideal for use in applications requiring the 51021 housing with a min cable entry of 0.02 inch and max cable entry of 0.039 inch.
0462-203-08141
TE Connectivity's 0462-203-08141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire sizes ranging from 10 to 8 AWG. With a rated current of 60 A, it is ideal for high-power applications requiring reliable FEMALE contacts.
8655MH1501BLF
AMPHENOL ICC
Amphenol Icc's 8655MH1501BLF is a UL-approved HOOD with zinc alloy material. It has a min cable entry of 0.157" and max operating temperature of 120°C. Ideal for applications requiring UNC 4.40 mounting option and jack screw assembly in temperatures ranging from -40°C to 120°C.
0460-202-16141
TE Connectivity's 0460-202-16141 contact features a crimp terminal type, machined contact design, and rated AC voltage of 1500V. With a wire gauge range of 20-16 AWG, it is ideal for applications requiring a male round pin-socket contact style in assembly products.
0460-204-12141
TE Connectivity's 0460-204-12141 contact features crimp terminal type, machined contact design, and can handle wire gauge from 14 to 12 AWG. With a rated current of 25A, it is ideal for male contacts in straight mounting applications with temperatures ranging from -55 to 125°C.
FMK1G
FMK1G by Molex is an assembly product with UL approval. It features a max operating temperature of 100°C and a min operating temperature of -35°C. The hood, made of zinc, can be mounted using screws or #4-40 hardware. Ideal for various applications requiring durable and reliable assembly solutions.
M23053/16-004-0
3m Electronic Products Division
ASSEMBLY ITEMS; Jacket Material: CROSSLINKED ELASTOMERIC POLYOLEFIN; Construction: SINGLE WALL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE;
A3B-2630SCC
Hirose Electric
A3B-2630SCC by Hirose Electric is a CRIMP terminal CONTACT with FEMALE gender, suitable for STRAIGHT mounting. Made of PHOSPHOR BRONZE, it features BELLOWED contact style and 0.09" terminal length. Ideal for various assembly applications requiring reliable electrical connections.
33012-3003
Molex 33012-3003 is a female contact for MX150 connector with crimp terminal type. It has a rated current of 10A, contact resistance of 8mohm, and can handle wire sizes up to 22 AWG. Ideal for applications requiring straight mounting style and operating temperatures ranging from -40°C to 105°C.
87421-0000
Molex 87421-0000 CONTACT features CRIMP terminal type, FEMALE gender, and 0.098" terminal length. Ideal for 26 AWG wire in assembly product applications like 87439 with STRAIGHT mounting style.
0462-201-1631
TE Connectivity's 0462-201-1631 contact features a CRIMP terminal type, MACHINED contact design, and can handle temperatures from -55 to 150 °C. Ideal for applications requiring a FEMALE ROUND PIN-SOCKET contact style with wire sizes ranging from 20 to 16 AWG and rated current of 13 A.
206966-7
TE Connectivity's 206966-7 cable clamp has UL approval, shell size of 13, and accommodates up to 0 AWG wire. Made of polyethylene, it mounts straight with a 0.453" cable entry. Ideal for securing cables in various applications.
1658670-1
TE Connectivity's 1658670-1, a male signal contact assembly product for AMPLIMITE, features crimp terminals suitable for wire gauges from 28 to 22 AWG. With a finish thickness of 30 and operating temperatures ranging from -55°C to 105°C, it can handle currents up to 1.9A efficiently.
16-02-0087
HKP-F413
Honda Tsushin Kogyo
HKP-F413 by Honda Tsushin Kogyo is a female contact assembly product with a finish thickness of 4. It features crimp terminals, loose contact design, and square pin-socket style. Ideal for applications requiring straight mounting, it accommodates wire sizes from 28 AWG to 24 AWG using phosphor bronze material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
1731110058
The Molex 1731110058 is a BACKSHELL assembly product designed for FCT D-SUB usage. It has a min cable entry of 0.315" and a max cable entry of 0.492". Made of zinc alloy, it can withstand temperatures ranging from -35°C to 100°C.
1731110060
Molex 1731110060 BACKSHELL is ideal for FCT D-SUB applications. Features include 0.315" min and 0.492" max cable entry, ZINC ALLOY material, -35 to 100°C operating temp range, and SCREW mounting options (4-40 UNC).
1731110081
CONNECTOR ACCESSORY; IEC Conformity: NO; Assembly Item Name: BACKSHELL; MIL Conformity: NO; Mounting Option-2: SCREW; Material: METAL;
1731120248
CONNECTOR ACCESSORY; Usage: FCT D-SUB; DIN Conformity: NO; Mounting Option-2: SCREW; Assembly Item Name: SCREW LOCK; MIL Conformity: NO;
1731110082
Molex 1731110082 is a zinc alloy BACKSHELL for D-SUB CONNECTOR with 0.118" to 0.335" cable entry. It can operate b/w -35°C to 100°C, mounted using 4-40 UNC screws. Ideal for applications requiring secure cable connections in various environments.
1731110062
CONNECTOR ACCESSORY; Usage: FCT D-SUB, SIZE 3; Mounting Option-1: #4-40; Assembly Item Name: BACKSHELL; DIN Conformity: NO; Mounting Option-2: SCREW;
1731110065
CONNECTOR ACCESSORY; Maximum Cable Entry: .591 inch; Minimum Operating Temperature: -35 Cel; Material: ZINC ALLOY; Mounting Option-1: 4-40 UNC; DIN Conformity: NO;
1731110086
Molex 1731110086 backshell for FCT D-SUB, SIZE 1 with 0.197" min and 0.315" max cable entry. Made of ZINC ALLOY, it can withstand -35 to 100°C. Mounting option includes SCREW for secure installation in various applications.
1731120208
CONNECTOR ACCESSORY; DIN Conformity: NO; Maximum Wire Size: 22 AWG; Finish Thickness: 51.18; Contact Gender: MALE; Terminal Type: CRIMP;
1731120300
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Mounting Option-2: SCREW; Mounting Option-1: 4-40 UNC;
1731120214
The Molex 1731120214 contact features a finish thickness of 7.87, crimp terminal type, and machined contact design. Ideal for applications requiring female contacts with straight mounting style and copper alloy material. Supports wire sizes from 24 AWG to 20 AWG in various assembly products.
1731110059
1731120380
CONNECTOR ACCESSORY; Mounting Option-2: SCREW; Mounting Option-1: #4-40 UNC; Assembly Item Name: SCREW LOCK; MIL Conformity: NO; Usage: FCT D-SUB;
1731120200
1731120215
CONNECTOR ACCESSORY; Rated Current: 7.5 A; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH - GOLD OVER NICKEL; Mounting Style: STRAIGHT; Usage: FCT D-SUB;
1731120342
CONNECTOR ACCESSORY; IEC Conformity: NO; MIL Conformity: NO; DIN Conformity: NO; Material: STEEL; Mounting Option-2: SCREW;
1731120062
1731120175
1731110061
CONNECTOR ACCESSORY; Minimum Operating Temperature: -35 Cel; IEC Conformity: NO; Material: ZINC ALLOY; MIL Conformity: NO; Mounting Option-2: SCREW;
1731120743
CONNECTOR ACCESSORY; DIN Conformity: NO; Finish Thickness: 7.87; MIL Conformity: NO; Assembly Item Name: CONTACT; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved