Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-09-2103 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG.
Median Price
$0.082
Lifecycle Status
Suppliers In-Stock
48
In-Stock Inventory
1k+
Electroshield
1+ parts
$0.040
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.072
$0.060
Heilind Electronics
$0.073
Sager
$0.074
Verical
$0.080
$0.077
Distrelec
$0.152
$0.109
$0.087
RS Americas
$0.170
$0.129
$0.104
Mouser Electronics
$0.180
$0.115
$0.092
$0.083
Arrow
$0.185
$0.081
DigiKey
$0.200
$0.090
Farnell
$0.232
$0.122
$0.088
Master Electronics
$0.075
Chip1Stop
NEP Electronics
TTI
$0.076
$0.068
$0.062
Avnet
$0.078
Newark
$0.114
RS (Exports)
$0.183
$0.137
$0.111
Beyond Components
PSC Electronics
Freelance Electronics
$0.034
Digiode
$0.038
Vyrian
TestEquity
Carlton-Bates
$0.100
Hutch & Son
$0.140
Component Electronics Inc.
$0.150
$0.120
TME
$0.113
$0.093
IBS Electronics
$0.117
$0.106
Diverse Electronics
SPM Sales
Bisco
$0.275
$0.067
Beltway Electronics Company
R&J Components
Standard Data Resources
Bristol Electronics
Inventory MP
Cyclops Electronics Ltd
Ashlea Components Ltd
Classic Components Corporation
M&R Communications
Semi Source
MISTER SPROCKETS
Resion
QIE Inc.
EPE Components Inc.
Sunrise Surplus Inc.
NAC Semi
Corphita
$0.036
Eastek
$0.063
Argo Parts USA
$0.079
Netroflash
Continental Prestige Electronics
$0.187
$0.099
Benley Electronics
$1.750
Assy Fe
GreenTree Electronics
$0.096
Perfect Parts
Robosynatics
$1.000
$0.926
RTC Component Inc.
EMSNET (Excess)
The thick finish provides durability and protection, ensuring the longevity of the product.
Crimp terminals allow for a secure and reliable connection, reducing the risk of connectivity issues.
The use of contacts ensures efficient and effective electrical connections within the assembly product.
Support for 20 AWG wire ensures compatibility with a wide range of wire sizes, increasing flexibility in usage.
The ability to accommodate up to 14 AWG wire allows for use with heavier gauge wires, making it versatile.
Male contacts are commonly used for connecting to female receptacles, providing a standard and widely accepted connection interface.
Straight mounting style simplifies installation and ensures a neat and organized appearance of the assembly.
The round pin-socket contact style offers a secure and reliable connection, ideal for applications requiring stable electrical contact.
Brass material offers excellent conductivity and corrosion resistance, ensuring reliable performance over time.
The specified terminal length provides ample surface area for making strong connections, promoting stability and conductivity.
Assembly Products 02-09-2103 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Maximum Wire Size:
Minimum Wire Size:
02-09-2103 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Philips Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM7805CT
Texas Instruments
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LIS3DHTR
STMicroelectronics
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
B340A-13-F
Diodes Incorporated
B340A-13-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 3A max output current, and 0.5V max forward voltage. It is used for efficiency applications in electronics due to its small outline package and high operating temperature range of -55°C to 150°C.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
Rfe International
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Boca Semiconductor
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
International Devices
08-50-0032
Molex
Molex 08-50-0032 contact features crimp terminal type, compression contact style, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 30 AWG to 22 AWG. Suitable for straight mounting in assembly products with a finish thickness of 120 and 0.062 inch max cable entry.
1053002300
Molex 1053002300 is a NANO-FITTM receptacle housing with 30 finish thickness. It features CRIMP terminal type, rated for 300V AC voltage and 6.5A current. Ideal for power applications, it accommodates wire sizes from 20-22 AWG with 0.06" cable entry.
M80-0110005
Harwin Plc
The Harwin PLC M80-0110005 is a CRIMP terminal with max temp of 125°C and min temp of -55°C. It has a rated current of 3A, suitable for 22 AWG wire size. This FEMALE contact with ROUND PIN-SOCKET design is ideal for SIGNAL applications with 0.043" cable entry.
1062-16-0644
TE Connectivity
TE Connectivity's 1062-16-0644 is a CRIMP terminal with stamped contact design. It supports wire gauge 16 (1 mm²) to 20 AWG, rated for 13A current. Ideal for applications requiring female contact gender and cable entry from 0.055" to 0.1", operating b/w -55°C to 150°C.
SSF-21T-P1.4
J S T Mfg
SSF-21T-P1.4 by J S T Mfg is a CSA and UL approved CRIMP terminal connector with 2.1" min cable entry, -40 to 105°C temp range, ideal for 22-18 AWG wires in power applications. Featuring a FEMALE contact gender, PHOSPHOR BRONZE material, and 7A rated current capacity for reliable connections.
204370-2
TE Connectivity's 204370-2 is a CRIMP terminal CONTACT for 2221860 SERIES CONNECTOR with finish thickness of 50, suitable for wire sizes ranging from 28 AWG to 22 AWG. It has a rated current of 5 A and operates b/w -55 °C to 125 °C, making it ideal for SIGNAL applications requiring male contact gender.
50125-8000
The Molex 50125-8000 is a male contact assembly product with crimp terminal type. It is designed for use with the 51047 series housing, featuring a finish thickness of 35 and chain contact design. Ideal for wire sizes ranging from 28 to 26 AWG, it offers a straight mounting style and is made of phosphor bronze material.
D38999/33Z19R
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Material: METAL; Maximum Operating Temperature: 175 Cel; Minimum Operating Temperature: -65 Cel; Shell Sizes: 19;
AWM-6S
Amphenol
CONNECTOR ACCESSORY;
08-70-0069
Molex 08-70-0069 CONTACT features CRIMP terminal type, BRASS material, and 0.186" terminal length. Ideal for applications requiring FEMALE contact gender, STRAIGHT mounting style, and COMPRESSION contact design in assemblies with wire sizes ranging from 28 AWG to 22 AWG.
WP-2P
CONNECTOR ACCESSORY; MIL Conformity: NO; Maximum Operating Temperature: 125 Cel; IEC Conformity: NO; Material: POLYETHYLENE; DIN Conformity: NO;
131250-006
CONNECTOR ACCESSORY; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -75 Cel; Maximum Wire Size: 0 AWG; Material: ELASTOMER;
0-0205090-1
TE Connectivity's 0-0205090-1 is a CRIMP terminal with COPPER ALLOY material. It supports wire sizes from 24 AWG to 20 AWG, rated for 7.5A current. Ideal for AMPLIMITE applications due to its SIGNAL design and operating temperatures ranging from -55°C to 125°C.
0-0828922-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel;
1-66103-4
TE Connectivity 1-66103-4 is a male contact for CPC/G and M series connectors. It has a crimp terminal type, suitable for 20-24 AWG wires with 0.6 mm2 cross-section area. With a rated current of 13A, it operates b/w -55 to 150°C, making it ideal for power and signal applications.
ZE05-2022SCF
Hirose Electric
08-50-0113
Molex 08-50-0113 CONTACT is a CRIMP terminal with BRASS material. It supports wire sizes from 30 AWG to 22 AWG, ideal for applications requiring POWER contact design. With a finish thickness of 100, it suits usage in 2695 AND 5051 assemblies with FEMALE contact gender.
M80-0130005
The Harwin PLC M80-0130005 is a CRIMP terminal with operating temperatures ranging from -55°C to 125°C. It features a rated current of 3A, suitable for wire sizes b/w 28-24 AWG. This FEMALE contact with ROUND PIN-SOCKET design in BRASS material is ideal for SIGNAL applications requiring a STRAIGHT mounting style and 0.043" cable entry.
5398
M23053/5-106-9
3m Electronic Products Division
ASSEMBLY ITEMS; DIN Conformity: NO; Assembly Item Name: TAPER SLEEVE; IEC Conformity: NO; Jacket Material: CROSSLINKED POLYOLEFIN; MIL Conformity: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
02-09-1104
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
02-09-1102
Molex 02-09-1102 (0.093 Series Housing) features crimp terminals, chain contact design, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 20 to 14 AWG. Suitable for straight mounting with round pin-socket contact style.
02-09-2101
Molex 02-09-2101 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG. Great for assembly products with a finish thickness of 50.
02-09-1117
Molex 02-09-1117 is a 0.093 Series Housing with CRIMP terminals for 22-18 AWG wires. Features FEMALE contact design, ROUND PIN-SOCKET style, made of BRASS. Ideal for straight mounting applications in assembly products.
02-09-2118
Molex 02-09-2118 is a male contact with round pin-socket design, made of brass. It supports wire sizes from 22 AWG to 18 AWG and has a terminal length of 0.24 inch. Ideal for use in 0.093/(2.36) series housing assemblies requiring crimp terminals with straight mounting style.
02-09-5100
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Style: SQ PIN-SKT; DIN Conformity: NO; Assembly Item Name: CONTACT; Contact Gender: FEMALE;
02-09-5106
Molex 02-09-5106 is a female contact with brass material, suitable for 0.093/(2.36) series housing. Features crimp terminal type, round pin/socket contact style, and accepts wire sizes from 20 AWG to 14 AWG. Ideal for applications requiring a straight mounting style and a min cable entry of 1.65" up to max of 4.06".
02-09-1134
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Terminal Length: .53 inch; MIL Conformity: NO; Mounting Style: STRAIGHT; Finish Thickness: 100;
02-09-1205
The Molex 02-09-1205 is a 0.093 Series Housing contact with a finish thickness of 20. It features a CRIMP terminal type and CHAIN contact design, suitable for applications requiring FEMALE contacts with STRAIGHT mounting style. This assembly product supports wire sizes from 20 AWG to 14 AWG and is made of PHOSPHOR BRONZE material.
02-09-8103
CONNECTOR ACCESSORY; Minimum Wire Size: 22 AWG; Terminal Length: .24 inch; Maximum Wire Size: 18 AWG; Finish Thickness: 20; Terminal Type: CRIMP;
02-09-8109
CONNECTOR ACCESSORY; Material: BRASS; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; Terminal Type: CRIMP;
02-09-2611
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .28 inch;
02-09-1615
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; IEC Conformity: NO; Minimum Wire Size: 18 AWG;
02-09-8108
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 18 AWG; Material: BRASS; MIL Conformity: NO; Finish Thickness: 20;
02-09-2166
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Terminal Length: .24 inch;
02-09-2157
CONNECTOR ACCESSORY; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO; Minimum Wire Size: 22 AWG; Assembly Item Name: CONTACT;
02-09-2173
CONNECTOR ACCESSORY; Terminal Length: .27 inch; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; Usage: .093 SERIES HOUSING; Contact Style: ROUND PIN-SOCKET;
02-09-2127
CONNECTOR ACCESSORY; Contact Gender: MALE; MIL Conformity: NO; IEC Conformity: NO; Mounting Style: STRAIGHT; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved