Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 02-09-1205 is a 0.093 Series Housing contact with a finish thickness of 20. It features a CRIMP terminal type and CHAIN contact design, suitable for applications requiring FEMALE contacts with STRAIGHT mounting style. This assembly product supports wire sizes from 20 AWG to 14 AWG and is made of PHOSPHOR BRONZE material.
Median Price
$0.066
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.071
100+ parts
-
1k+ parts
$0.065
10k+ parts
$0.061
Element14
$0.141
$0.074
$0.062
Chip1Stop
$0.067
DigiKey
Master Electronics
$0.070
Verical
Powell Electronics
TTI
$0.049
Newark
$0.075
Mouser Electronics
$0.083
Interstate Connecting
$0.052
Farnell
RS (Exports)
$0.108
Heilind Electronics
$0.053
Digiode
Nova Conductors
$0.099
Rapid Electronics
$406.751
IBS Electronics
$0.072
Vyrian
Mil-Aero Solutions, Inc.
VNN
Corphita
$0.064
Argo Parts USA
$0.096
Assy Fe
GreenTree Electronics
$0.057
Continental Prestige Electronics
$0.039
Authorized Procurement Solutions
Glotronic Ltd.
Perfect Parts
Designed for use with 0.093 series housing, ensuring compatibility and proper fitment.
With a finish thickness of 20, this product offers durability and longevity, making it suitable for long-term use.
The crimp terminal type allows for a secure connection, reducing the risk of accidental disconnection during use.
The chain contact design provides a reliable and stable connection, ensuring consistent performance.
Being specifically designed as a contact component, this product is crucial for establishing electrical connections within the assembly.
Supports a minimum wire size of 20 AWG, allowing for compatibility with a wide range of wire gauges.
Capable of accommodating a maximum wire size of 14 AWG, providing flexibility in wire selection for the assembly.
The female contact gender is a common industry standard, allowing for easy mating with male connectors.
The straight mounting style simplifies installation and integration into the assembly, ensuring a straightforward setup process.
The round pin-socket contact style offers a reliable and secure connection, reducing the risk of signal loss or interference.
Constructed from phosphor bronze, this product provides excellent conductivity and durability, making it ideal for electrical applications.
With a terminal length of 0.24 inch, this product offers a secure and stable connection point for the wire, ensuring proper contact and conductivity.
Assembly Products 02-09-1205 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Maximum Wire Size:
Minimum Wire Size:
PCN Assembly/Origin - Multiple Devices Additional Tooling 27/Mar/2020
PCN Other - Multiple Devices Shipping Location 20/Mar/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Micro Commercial Components
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Crystalonics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
Fairchild Semiconductor
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Microchip Technology
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
282465-1
TE Connectivity
TE Connectivity's 282465-1 cap housing features crimp terminal type, stamped contact design, and brass material. With a rated current of 14A and max operating temperature of 125°C, it is ideal for discrete wire cable types in applications requiring male contact gender and straight mounting style.
WP-4P
WP-4P by TE Connectivity is an Assembly Product designed for DTP SERIES applications. It features a temperature range of -55 to 125°C, supports wire sizes up to 0 AWG, and is made of Polybutylene Terephthalate. Ideal for power and signal connections in various industries.
DE-24657
Cinch Connectivity Solutions
CONNECTOR ACCESSORY; Material: METAL; MIL Conformity: NO; DIN Conformity: NO; Assembly Item Name: JUNCTION SHELL; IEC Conformity: NO;
87116-2
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0; MIL Conformity: NO; Material: NYLON66; Assembly Item Name: KEYING ITEM;
AT62-14-0122
Amphenol
CONNECTOR ACCESSORY;
770520-3
TE Connectivity's 770520-3 contact features crimp terminal type, stamped contact design, and copper alloy material. With a wire gauge of 16 AWG and rated current of 17A, it is ideal for applications requiring a female round pin-socket contact style. The contact can withstand temperatures from -40 to 125°C, making it suitable for various assembly products.
1-2308340-5
TE Connectivity 1-2308340-5 is an Assembly Product with shielding, operating from -40 to 90°C. Made of ZINC ALLOY, it supports wire sizes up to 0 AWG. Mounting options include SCREW and #4-40 UNC, ideal for various industrial applications.
SEH-001T-P0.6L
J S T Mfg
SEH-001T-P0.6L by J S T Mfg is a CRIMP terminal with 3A rated current, 20 mohm contact resistance, and 85°C max operating temp. Ideal for applications requiring FEMALE contacts in assemblies with wire sizes ranging from 26 to 22 AWG.
W12P
The TE Connectivity W12P is a UL-approved assembly product with operating temperatures ranging from -55°C to 125°C. It features a max wire size of 0 AWG and is designed for power and signal applications using polybutylene terephthalate material. Ideal for various industrial and commercial electrical connections.
AW8S
17790000021
Harting Electronics & Kg
CONNECTOR ACCESSORY; DIN Conformity: NO; Assembly Item Name: CODING ITEM; Material: THERMOPLASTIC; IEC Conformity: NO; MIL Conformity: NO;
1060-16-0622
TE Connectivity 1060-16-0622 is a CRIMP terminal with stamped contact design. It supports wire gauge from 20 AWG to 16 AWG, rated for 13A current. Ideal for applications requiring male gendered contacts and straight mounting style.
0462-201-20141
TE Connectivity's 0462-201-20141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for 20 AWG wires at 7.5 A current. Ideal for POWER applications requiring FEMALE ROUND PIN-SOCKET contacts.
WP-4S
CONNECTOR ACCESSORY; Material: POLYETHYLENE; Minimum Operating Temperature: -55 Cel; IEC Conformity: NO; DIN Conformity: NO; Usage: DTP SERIES;
1SNK708911R0000
TERMINAL BLOCK ACCESSORY; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
2-2154857-1
TE Connectivity's 2-2154857-1 is a POWER assembly product with a rated voltage of 250V and max operating temperature of 105°C. It can handle wire sizes up to 0 AWG and has a rated current of 4A. This versatile copper alloy component is commonly used in applications requiring high power transmission.
WM-6S
TE Connectivity's WM-6S is a power and signal assembly item designed for DTM SERIES. With a temp range of -55 to 125°C, it accommodates wires up to 0 AWG using polybutylene terephthalate material. Ideal for various applications requiring robust wire connections.
50147-8100
Molex
The Molex 50147-8100 is a crimp terminal contact designed for the 52266 series connector. It features a min wire size of 22 AWG and max wire size of 20 AWG, with a contact gender of male. This assembly item has a mounting style of straight and contact design as blade pin-skt, made from phosphor bronze material.
796075-1
CONNECTOR ACCESSORY; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 105 Cel; Contact Gender: MALE; Maximum Wire Size: 0 AWG;
5398
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
02-09-1104
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
02-09-1102
Molex 02-09-1102 (0.093 Series Housing) features crimp terminals, chain contact design, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 20 to 14 AWG. Suitable for straight mounting with round pin-socket contact style.
02-09-2101
Molex 02-09-2101 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG. Great for assembly products with a finish thickness of 50.
02-09-1117
Molex 02-09-1117 is a 0.093 Series Housing with CRIMP terminals for 22-18 AWG wires. Features FEMALE contact design, ROUND PIN-SOCKET style, made of BRASS. Ideal for straight mounting applications in assembly products.
02-09-2103
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: MALE; Finish Thickness: 50; Terminal Length: .253 inch; Assembly Item Name: CONTACT;
02-09-2118
Molex 02-09-2118 is a male contact with round pin-socket design, made of brass. It supports wire sizes from 22 AWG to 18 AWG and has a terminal length of 0.24 inch. Ideal for use in 0.093/(2.36) series housing assemblies requiring crimp terminals with straight mounting style.
02-09-5100
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Style: SQ PIN-SKT; DIN Conformity: NO; Assembly Item Name: CONTACT; Contact Gender: FEMALE;
02-09-5106
Molex 02-09-5106 is a female contact with brass material, suitable for 0.093/(2.36) series housing. Features crimp terminal type, round pin/socket contact style, and accepts wire sizes from 20 AWG to 14 AWG. Ideal for applications requiring a straight mounting style and a min cable entry of 1.65" up to max of 4.06".
02-09-1134
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Terminal Length: .53 inch; MIL Conformity: NO; Mounting Style: STRAIGHT; Finish Thickness: 100;
02-09-8103
CONNECTOR ACCESSORY; Minimum Wire Size: 22 AWG; Terminal Length: .24 inch; Maximum Wire Size: 18 AWG; Finish Thickness: 20; Terminal Type: CRIMP;
02-09-8109
CONNECTOR ACCESSORY; Material: BRASS; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; Terminal Type: CRIMP;
02-09-2611
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .28 inch;
02-09-1615
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; IEC Conformity: NO; Minimum Wire Size: 18 AWG;
02-09-8108
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 18 AWG; Material: BRASS; MIL Conformity: NO; Finish Thickness: 20;
02-09-2166
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Terminal Length: .24 inch;
02-09-1204
CONNECTOR ACCESSORY; Maximum Wire Size: 18 AWG; Contact Gender: FEMALE; Terminal Length: .24 inch; IEC Conformity: NO; DIN Conformity: NO;
02-09-1208
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Maximum Wire Size: 18 AWG; Minimum Wire Size: 22 AWG; Finish Thickness: 20; Terminal Length: .24 inch;
02-09-1212
CONNECTOR ACCESSORY; Finish Thickness: 20; Maximum Wire Size: 18 AWG; Assembly Item Name: CONTACT; Terminal Length: .24 inch; DIN Conformity: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved