Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-09-5100 is a CRIMP FEMALE CONTACT with STRAIGHT MOUNTING STYLE and SQ PIN-SKT design made of BRASS. Ideal for assembly products requiring secure electrical connections in various applications.
Median Price
$0.549
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Argo Parts USA
$0.850
Netroflash
$0.833
Perfect Parts
Corphita
Crimped terminals provide a secure connection and better conductivity, ensuring reliable performance of the assembly product.
Being specifically designed as a contact component, this product is optimized for facilitating electrical connections in assemblies.
Female contacts are often more durable and can withstand higher mating cycles, making this product suitable for long-term use.
The straight mounting style simplifies the installation process and ensures a neat and organized assembly layout.
The square pin socket contact style offers a high contact density and reliable connection, making it ideal for applications requiring precision and efficiency.
Brass is known for its excellent electrical conductivity and corrosion resistance, enhancing the overall quality and longevity of the product.
Assembly Products 02-09-5100 attributes and parameters. Explore more Assembly Products devices from Molex
Assembly Item Name:
Connector Accessory Type:
Contact Gender:
Contact Style:
DIN Conformity:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Type:
02-09-5100 Connector Accessories trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Lite-on Semiconductor
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
Digitron Semiconductors
Meritek Electronics
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Onsemi
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
RC0805FR-0710RL
Yageo
Yageo's RC0805FR-0710RL is a 10 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. With a temperature range of -55 to 155 °C, it suits applications requiring precise resistance values in compact surface mount designs.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
2414-002-1886
CONNECTOR ACCESSORY; Contact Gender: FEMALE; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Material: STEEL;
213823-2
TE Connectivity 213823-2 is a RECEPTACLE with Shell Size of 14. It has Max Operating Temp of 105°C and Min Operating Temp of -55°C. Made of ZINC ALLOY, it supports wire size up to 0 AWG, ideal for assembly applications.
2CTC-R
Adam Tech
The Adam Tech 2CTC-R is a CRIMP terminal with a rated current of 2A and contact resistance of 20 mohm. It supports wire sizes from 28 to 22 AWG, ideal for applications requiring FEMALE contacts in straight mounting style with SQ PIN-SKT design. Operating temperatures range from -25°C to 85°C.
0460-215-16141
TE Connectivity's 0460-215-16141 is a male power contact with crimp terminal type, suitable for 14 AWG wire. It has a rated current of 13A and operates b/w -55°C to 125°C. Ideal for applications requiring straight mounting, such as power assemblies.
HDC34-24
CONNECTOR ACCESSORY; Maximum Operating Temperature: 125 Cel; Contact Gender: MALE; Minimum Operating Temperature: -55 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG;
929939-3
TE Connectivity 929939-3 is a CRIMP terminal with stamped contact design. It operates b/w -40 to 130°C, suitable for wire sizes ranging from 20 to 17 AWG. With a rated current of 30A, it's commonly used in assembly products for female contacts.
1SNK900001R0000
Abb
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO; Maximum Operating Temperature: 110 Cel; Assembly Item Name: END STOP;
5013340000
Molex
Molex 5013340000 CONTACT for 501330, 104050 with CRIMP terminal type. Signal design made of PHOSPHOR BRONZE, FEMALE contact gender. Supports wire sizes from 32 AWG to 28 AWG, rated for 1A current with 0.0315" cable entry.
F22891-000
CONNECTOR ACCESSORY;
281934-2
TE Connectivity 281934-2 is a SEALING ITEM with Silicone material. It has a max operating temp of 130°C and min of -40°C. Supports up to 0 AWG wire size and 2.4" cable entry, ideal for various assembly applications.
16-02-0097
16-02-0087
1SNK900618R0000
TERMINAL BLOCK ACCESSORY; Wire Gauge (AWG): 0; Insulator Material: POLYCARBONATE; Maximum Operating Temperature: 110 Cel; Minimum Operating Temperature: -55 Cel; Maximum Wire Size: 0 AWG;
AWM-4P
Amphenol
12066614
Delphi Connection Systems
CONNECTOR ACCESSORY; Contact Gender: FEMALE; DIN Conformity: NO; Maximum Cable Entry: .079 inch; Assembly Item Name: CONTACT; Minimum Cable Entry: .039 inch;
163557-2
The TE Connectivity 163557-2 is a MATE-N-LOK HOUSING with CRIMP terminals. It supports wire sizes from 22 AWG to 18 AWG and rated for 15A current at 250V AC. Ideal for power applications, it features FEMALE contacts with ROUND PIN-SOCKET design and BRASS material construction.
43031-0001
Molex 43031-0001 CONTACT features CHAIN design, PHOSPHOR BRONZE material, and 0.073" cable entry. Ideal for 24-20 AWG wires in assemblies like 43020, 43640, and 44300.
963530-1
CONNECTOR ACCESSORY; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 130 Cel; Wire Gauge (AWG): 0; Minimum Operating Temperature: -40 Cel;
3030213
Phoenix Contact
TERMINAL BLOCK ACCESSORY; Assembly Item Name: JUMPER; Material: COPPER; Approvals (V): UL; MIL Conformity: NO; IEC Conformity: NO;
1534807-1
TE Connectivity's 1534807-1 BACKSHELL features 2 shell sizes, shielding, and 0.189" min cable entry. Ideal for applications requiring steel material, it supports up to 0 AWG wire size with 0.433" max cable entry. Mounting options include SCREW and 14702 for versatile assembly needs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
02-09-1104
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
02-09-1102
Molex 02-09-1102 (0.093 Series Housing) features crimp terminals, chain contact design, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 20 to 14 AWG. Suitable for straight mounting with round pin-socket contact style.
02-09-2101
Molex 02-09-2101 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG. Great for assembly products with a finish thickness of 50.
02-09-1117
Molex 02-09-1117 is a 0.093 Series Housing with CRIMP terminals for 22-18 AWG wires. Features FEMALE contact design, ROUND PIN-SOCKET style, made of BRASS. Ideal for straight mounting applications in assembly products.
02-09-2103
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: MALE; Finish Thickness: 50; Terminal Length: .253 inch; Assembly Item Name: CONTACT;
02-09-2118
Molex 02-09-2118 is a male contact with round pin-socket design, made of brass. It supports wire sizes from 22 AWG to 18 AWG and has a terminal length of 0.24 inch. Ideal for use in 0.093/(2.36) series housing assemblies requiring crimp terminals with straight mounting style.
02-09-5106
Molex 02-09-5106 is a female contact with brass material, suitable for 0.093/(2.36) series housing. Features crimp terminal type, round pin/socket contact style, and accepts wire sizes from 20 AWG to 14 AWG. Ideal for applications requiring a straight mounting style and a min cable entry of 1.65" up to max of 4.06".
02-09-1134
CONNECTOR ACCESSORY; Additional Features: CONTACT FINISH: TIN; Terminal Length: .53 inch; MIL Conformity: NO; Mounting Style: STRAIGHT; Finish Thickness: 100;
02-09-1205
The Molex 02-09-1205 is a 0.093 Series Housing contact with a finish thickness of 20. It features a CRIMP terminal type and CHAIN contact design, suitable for applications requiring FEMALE contacts with STRAIGHT mounting style. This assembly product supports wire sizes from 20 AWG to 14 AWG and is made of PHOSPHOR BRONZE material.
02-09-8103
CONNECTOR ACCESSORY; Minimum Wire Size: 22 AWG; Terminal Length: .24 inch; Maximum Wire Size: 18 AWG; Finish Thickness: 20; Terminal Type: CRIMP;
02-09-8109
CONNECTOR ACCESSORY; Material: BRASS; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; Terminal Type: CRIMP;
02-09-2611
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .28 inch;
02-09-1615
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; IEC Conformity: NO; Minimum Wire Size: 18 AWG;
02-09-8108
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 18 AWG; Material: BRASS; MIL Conformity: NO; Finish Thickness: 20;
02-09-2166
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Terminal Length: .24 inch;
02-09-5133
CONNECTOR ACCESSORY; MIL Conformity: NO; Assembly Item Name: CONTACT; DIN Conformity: NO; Material: BRASS; Contact Style: SQ PIN-SKT;
02-09-5143
CONNECTOR ACCESSORY; Contact Style: SQ PIN-SKT; Material: BRASS; Terminal Type: CRIMP; Contact Gender: FEMALE; Mounting Style: STRAIGHT;
02-09-5102
CONNECTOR ACCESSORY; Contact Style: SQ PIN-SKT; Terminal Type: CRIMP; DIN Conformity: NO; Mounting Style: STRAIGHT; Contact Gender: FEMALE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved