Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 02-09-1134 is a female contact with round pin-socket style, made of brass. It has a terminal length of 0.53" and finish thickness of 100. Used in 0.093/(2.36) series housing for solder terminals, providing reliable straight mounting assembly solutions.
Median Price
$0.071
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
100+ parts
-
1k+ parts
10k+ parts
$0.060
Interstate Connecting
Digiode
$0.067
Nova Conductors
$0.100
Vyrian
VNN
R&J Components
Resion
Bristol Electronics
Semicontronic
$0.058
Corphita
$0.064
Argo Parts USA
$0.097
Continental Prestige Electronics
$0.098
Aztec Data Supply Inc.
$4.473
Perfect Parts
The 0.093/(2.36) series housing provides a secure fit for the components.
With a finish thickness of 100, this product offers durability and protection.
The solder terminal type ensures a reliable electrical connection.
The loose contact design allows for easy insertion and removal of components.
The assembly item name 'CONTACT' signifies the importance of electrical connections in this product.
The female contact gender is compatible with male connectors, providing a secure connection.
The straight mounting style simplifies installation and ensures a neat appearance.
The round pin-socket contact style offers a reliable and secure connection.
Brass material provides durability, conductivity, and corrosion resistance.
The 0.53 inch terminal length allows for easy connection and compatibility with various components.
Assembly Products 02-09-1134 attributes and parameters. Explore more Assembly Products devices from Molex
Additional Features:
Assembly Item Name:
Connector Accessory Type:
Contact Design:
Contact Gender:
Contact Style:
DIN Conformity:
Finish Thickness:
IEC Conformity:
MIL Conformity:
Material:
Mounting Style:
Terminal Length:
Terminal Type:
Usage:
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
Good-ark Electronics
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
Surge Components
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Hy Electronic
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
9019190000
Weidmueller & Kg
TERMINAL BLOCK ACCESSORY; MIL Conformity: NO; Minimum Wire Size: 12 AWG; Assembly Item Name: FERRULE; DIN Conformity: NO; Approvals (V): CSA; GOST; UL; VDE;
42815-0144
Molex
Molex 42815-0144 is a female contact for Mini Fit connectors. Made of copper alloy, it supports wire sizes from 16 to 14 AWG. With a bellowed type design and straight mounting style, it is ideal for power applications with a finish thickness of 10.
100132-1
CONNECTOR ACCESSORY; Wire Gauge (AWG): 0; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG;
08-55-0124
Molex 08-55-0124 CONTACT features CRIMP terminal type for 22-30 AWG wire sizes. Designed for SIGNAL applications, it has FEMALE contact gender with COMPRESSION style in BRASS material. Ideal for 0.062" cable entry, with a finish thickness of 15, this assembly product is perfect for various electronic connections.
50147-8100
The Molex 50147-8100 is a crimp terminal contact designed for the 52266 series connector. It features a min wire size of 22 AWG and max wire size of 20 AWG, with a contact gender of male. This assembly item has a mounting style of straight and contact design as blade pin-skt, made from phosphor bronze material.
1-967067-1
CONNECTOR ACCESSORY; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Maximum Wire Size: 0 AWG; Wire Gauge (AWG): 0;
685030101
CONNECTOR ACCESSORY;
16-02-0109
16-02-0107
1051430
Phoenix Contact
TERMINAL BLOCK ACCESSORY;
13697414
Delphi Connection Systems
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; MIL Conformity: NO; DIN Conformity: NO; Material: COPPER ALLOY;
1060-16-1222
TE Connectivity 1060-16-1222 is a CRIMP terminal with stamped contact design. It supports wire gauge up to 12 AWG and rated current of 13 A. Ideal for applications requiring male contact gender, with operating temperatures ranging from -55°C to 125°C.
5748676-3
TE Connectivity 5748676-3 is a backshell assembly product with 3 shell sizes, shielding, and zinc alloy material. It supports plug/receptacle usage with min cable entry of 0.255" and max operating temperature of 105°C. Ideal for applications requiring secure mounting using #4-40 screws and accommodating up to 0 AWG wire size.
R85049/85-08W02
CONNECTOR ACCESSORY; Material: ALUMINUM ALLOY; Maximum Wire Size: 0 AWG; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Operating Temperature: 175 Cel;
1534805-1
TE Connectivity's 1534805-1 BACKSHELL features steel material with shielding, 0.189" min cable entry, and 0.354" max cable entry. Ideal for applications requiring secure mounting with screws and accommodating up to 0 AWG wire sizes.
MTCB1X-105-XXX
TE Connectivity's MTCB1X-105-XXX is an Assembly Product with a max operating temperature of 125°C and min of -65°C. It supports up to 0 AWG wire size, rated for 1.5A current, and features male contact gender. Ideal for applications involving round wire due to its Polyarylene/Polyethylene material composition.
1SNK900001R0000
Abb
TERMINAL BLOCK ACCESSORY; IEC Conformity: NO; Approvals (V): UL; MIL Conformity: NO; Maximum Operating Temperature: 110 Cel; Assembly Item Name: END STOP;
W8P
The TE Connectivity W8P is a wedge item designed for power and signal assemblies in the DT Series. It supports wire sizes up to 0 AWG, with a temperature range from -55°C to 125°C. Made of polybutylene terephthalate, it's ideal for applications requiring high-performance connectivity.
1SNK150051R0000
TERMINAL BLOCK ACCESSORY; Minimum Operating Temperature: -55 Cel; Insulator Material: POLYAMIDE; Maximum Operating Temperature: 110 Cel; Maximum Wire Size: 0 AWG; Mounting Style: RIGHT ANGLE;
DZ5CE003L6
Schneider Electric Sa
Schneider Electric Sa's DZ5CE003L6 ferrule has NFC approval, operates b/w -20°C to 105°C, and supports up to 24 AWG wire. Ideal for electrical assemblies requiring copper material with precise wire termination in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02-09-2116
Molex 02-09-2116 is a male contact with round pin-socket design, made of brass material. It has a terminal length of 0.24 inch and supports wire sizes from 22 AWG to 18 AWG. Ideal for applications requiring a straight mounting style and crimp terminal type.
02-09-1119
Molex 02-09-1119 CONTACT features CRIMP terminals for 22-18 AWG wires. FEMALE gender, BRASS material, and ROUND PIN-SOCKET design make it ideal for STRAIGHT mounting in Assembly Products. With a 0.24" terminal length and 20 finish thickness, it ensures secure connections in various applications.
02-09-1104
Molex 02-09-1104 CONTACT features CRIMP terminal type, BRASS material, and FEMALE contact gender. Ideal for applications requiring 20-14 AWG wire sizes with ROUND PIN-SOCKET style. Suitable for straight mounting in assembly products with a finish thickness of 20.
02-09-1102
Molex 02-09-1102 (0.093 Series Housing) features crimp terminals, chain contact design, and brass material. Ideal for applications requiring female contacts with wire sizes ranging from 20 to 14 AWG. Suitable for straight mounting with round pin-socket contact style.
02-09-2101
Molex 02-09-2101 CONTACT features CRIMP terminal type, BRASS material, and ROUND PIN-SOCKET contact style. Ideal for applications requiring MALE contact gender, STRAIGHT mounting style, and wire sizes ranging from 20 AWG to 14 AWG. Great for assembly products with a finish thickness of 50.
02-09-1117
Molex 02-09-1117 is a 0.093 Series Housing with CRIMP terminals for 22-18 AWG wires. Features FEMALE contact design, ROUND PIN-SOCKET style, made of BRASS. Ideal for straight mounting applications in assembly products.
02-09-2103
CONNECTOR ACCESSORY; MIL Conformity: NO; Contact Gender: MALE; Finish Thickness: 50; Terminal Length: .253 inch; Assembly Item Name: CONTACT;
02-09-2118
Molex 02-09-2118 is a male contact with round pin-socket design, made of brass. It supports wire sizes from 22 AWG to 18 AWG and has a terminal length of 0.24 inch. Ideal for use in 0.093/(2.36) series housing assemblies requiring crimp terminals with straight mounting style.
02-09-5100
CONNECTOR ACCESSORY; Mounting Style: STRAIGHT; Contact Style: SQ PIN-SKT; DIN Conformity: NO; Assembly Item Name: CONTACT; Contact Gender: FEMALE;
02-09-5106
Molex 02-09-5106 is a female contact with brass material, suitable for 0.093/(2.36) series housing. Features crimp terminal type, round pin/socket contact style, and accepts wire sizes from 20 AWG to 14 AWG. Ideal for applications requiring a straight mounting style and a min cable entry of 1.65" up to max of 4.06".
02-09-1205
The Molex 02-09-1205 is a 0.093 Series Housing contact with a finish thickness of 20. It features a CRIMP terminal type and CHAIN contact design, suitable for applications requiring FEMALE contacts with STRAIGHT mounting style. This assembly product supports wire sizes from 20 AWG to 14 AWG and is made of PHOSPHOR BRONZE material.
02-09-8103
CONNECTOR ACCESSORY; Minimum Wire Size: 22 AWG; Terminal Length: .24 inch; Maximum Wire Size: 18 AWG; Finish Thickness: 20; Terminal Type: CRIMP;
02-09-8109
CONNECTOR ACCESSORY; Material: BRASS; Contact Gender: MALE; Contact Style: RND PIN-SKT; IEC Conformity: NO; Terminal Type: CRIMP;
02-09-2611
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Additional Features: CONTACT FINISH: TIN; MIL Conformity: NO; Mounting Style: STRAIGHT; Terminal Length: .28 inch;
02-09-1615
CONNECTOR ACCESSORY; Material: BRASS; Assembly Item Name: CONTACT; Maximum Wire Size: 14 AWG; IEC Conformity: NO; Minimum Wire Size: 18 AWG;
02-09-8108
CONNECTOR ACCESSORY; IEC Conformity: NO; Minimum Wire Size: 18 AWG; Material: BRASS; MIL Conformity: NO; Finish Thickness: 20;
02-09-2166
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Style: ROUND PIN-SOCKET; Mounting Style: STRAIGHT; Maximum Wire Size: 14 AWG; Terminal Length: .24 inch;
02-09-1106
CONNECTOR ACCESSORY; Assembly Item Name: CONTACT; Contact Design: LOOSE; Terminal Length: .24 inch; MIL Conformity: NO; Usage: 0.093/(2.36) SERIES HOUSING;
02-09-1153
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Design: CHAIN; Terminal Type: CRIMP; DIN Conformity: NO; Contact Style: ROUND PIN-SOCKET;
02-09-1154
CONNECTOR ACCESSORY; Contact Style: ROUND PIN-SOCKET; Finish Thickness: 20; Minimum Cable Entry: .11 inch; Assembly Item Name: CONTACT; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved