Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTW-C192TL5 by Lite-on Technology is a single color LED with a size of 1.15 mm and a rectangular shape. It has a max forward current of 0.02 A and can operate at temperatures ranging from -20 to 80 °C. This LED is suitable for surface mount applications requiring a white light source with a viewing angle of 130° and a nominal luminous intensity of 70.0 mcd.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$10.927
Kepictronics
Bastille Electronics
This LED product has a single configuration which makes it easy to use and integrate into any electronic device or circuit.
With a compact size of 1.15 mm, this LED is suitable for applications where space is limited, allowing for more versatile designs.
This LED has a single function which simplifies its usage and ensures that it is straightforward to connect and operate.
With a maximum forward current of 0.02 A, this LED can handle significant power without overheating, ensuring reliable performance and longevity.
This LED is a single-color type, offering a consistent and uniform illumination, making it ideal for various lighting applications.
This LED has two terminals, which simplifies the wiring and connection process, contributing to a faster and more efficient setup.
With a high maximum operating temperature of 80 °C, this LED can withstand elevated temperatures, making it suitable for demanding environments.
The low height of 0.4 mm allows for a more streamlined design and easier integration into electronic devices or systems.
The rectangular shape of this LED provides a larger light-emitting area, resulting in improved brightness and coverage.
This LED has a minimum operating temperature of -20 °C, ensuring its functionality even in colder conditions.
With a white color emission, this LED can provide a clean, crisp light suitable for various applications, enhancing the visual aesthetics.
This LED is packed in TR, 7 INCH packaging, which offers convenient and secure transportation and storage.
The terminal pitch of 1.5 mm provides ample space for connections, allowing for easy soldering and integration into circuit boards.
With a wide viewing angle of 130°, this LED can emit light over a large area, ensuring excellent visibility from various angles.
The nominal luminous intensity of 70.0 mcd guarantees a bright and noticeable illumination, making it suitable for applications where high visibility is required.
The surface mounting feature enables effortless installation onto circuit boards, simplifying the manufacturing process and saving assembly time.
Visible LEDs LTW-C192TL5 attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
LTW-C192TL5 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM2931AZ-5.0RAG
Onsemi
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
First Components International
LAN8720AI-CP-TR
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
General Semiconductor
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
FDD5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
HLMP3301
Cml Technologies & Kg
HLMP3301 by Cml Technologies & Kg is a 5mm SINGLE COLOR LED with peak wavelength of 635nm. It has a max forward current of 0.03A and operates b/w -55 to 100°C. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
240-123
Sloanled
Visible LEDs;
OVS-0603
SPC TECHNOLOGY/ MULTICOMP
OVS-0603 LED by Spc Technology/Multicomp is a 1mm blue LED with max forward current of 0.03A and viewing angle of 130°. Ideal for surface mount applications, it operates b/w -30 to 85 °C, emitting a luminous intensity of 100.0 mcd.
HSMA-C190
Broadcom
HSMA-C190 by Broadcom is a 1mm single color LED with a peak wavelength of 595nm and a viewing angle of 170°. It is commonly used in surface mount applications for its amber color and max forward voltage of 2.4V.
LBQ39G-L2OO-35-1
Osram Opto Semiconductors
Osram Opto Semiconductors LBQ39G-L2OO-35-1 is a 1.1mm BLUE SINGLE COLOR LED with peak wavelength of 465nm and max forward current of 0.015A. Ideal for surface mount applications, it has a viewing angle of 170° and operates b/w -30 to 85 °C temperatures.
TLDR5400
Temic Semiconductors
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: TINTED DIFFUSED; Packing Method: TR;
KPT-1608SURCK
Kingbright Electronic
KPT-1608SURCK by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with HYPER RED color, peak wavelength of 650nm, and max forward current of 0.03A. Ideal for surface mount applications, it offers a viewing angle of 120° and nominal luminous intensity of 220.0mcd.
598-8081-107F
Dialight
Dialight's 598-8081-107F is a single color LED with water clear lens, emitting green light. It has a size of 1.1mm and max forward current of 0.02A. Ideal for surface mount applications, with viewing angle of 140° and luminous intensity of 340mcd.
597-3401-502F
Dialight's 597-3401-502F is a single color LED with peak wavelength of 585nm. It has a max forward current of 0.025A and forward voltage of 2.8V. Ideal for surface mount applications, it offers a viewing angle of 110° and luminous intensity of 6.3mcd in yellow light emission.
L-934GD-14V
L-934GD-14V by Kingbright Electronic is a 3mm green LED with a built-in resistor. It has a max forward current of 0.0135A and a peak wavelength of 565nm. This LED is commonly used in applications such as indicator lights and displays.
HLMP-1503
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.0; Lens Type: DIFFUSED; Terminal Finish: MATTE TIN;
564-0100-132F
Dialight's 564-0100-132F is a triple color LED array with separate, 3-element configuration and diffused lens. It has peak wavelengths of 635nm, 585nm, and 565nm, suitable for applications requiring red, yellow, and green colors. With a max forward current of 0.03A and viewing angle of 60°, it is ideal for bulk mounting in various optoelectronic projects.
KPT-1608EC
KPT-1608EC by Kingbright Electronic is a 1.2mm SINGLE COLOR LED with peak wavelength of 627nm and 15.0mcd luminous intensity. Ideal for high efficiency red lighting applications, it operates b/w -40 to 85°C temperatures and has a water clear lens for a viewing angle of 120°.
598-8050-107F
Dialight's 598-8050-107F is a single color LED with water clear lens, emitting yellow light. It has a forward voltage of 2.4V and max forward current of 0.025A, suitable for surface mount applications in various electronic devices. Operating temperature ranges from -40 to 100°C, making it ideal for industrial and automotive lighting solutions.
SML-D12U1WT86
ROHM
ROHM's SML-D12U1WT86 is a 1.2mm SINGLE COLOR LED with MILKY WHITE lens. It has a max forward current of 0.02A and nominal luminous intensity of 63.0mcd. Ideal for surface mount applications, operating b/w -40°C to 85°C, commonly used in visible LEDs for various electronic devices.
LTL4233
Taiwan Liton Electronic C
LTL4233 by Taiwan Liton Electronic C is a 5mm SINGLE COLOR LED with peak wavelength of 565nm. With max forward current of 0.03A, it emits green light at 8.7mcd luminous intensity. Ideal for applications requiring diffused lighting in electronic devices due to its radial mount feature and T-1 3/4 package design.
HLMP-1790
Fairchild Semiconductor's HLMP-1790 is a 3mm single color LED with peak wavelength of 585nm. It has a max forward current of 0.0075A and forward voltage of 2.2V, suitable for applications requiring diffused green light emission in a radial mount configuration.
LTST-C191TBKT
Lite-on Technology
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
HLMP-4000#002
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Pitch: 1.27 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
LTW-C191TLA
LTW-C230DS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 315.0; Lens Type: YELLOW; Height: .82 mm;
LTW-C191DS5
LTW-C191DS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and luminous intensity of 125.5mcd. Ideal for applications requiring ultra bright white light, it operates b/w -30 to 85 °C with a forward current of 0.02A. This RECTANGULAR LED is designed for surface mount installation in various electronic devices.
LTW-C190DA5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: GREEN; Configuration: SINGLE;
LTW-C194TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Viewing Angle: 130 deg; Maximum Forward Current: .02 A;
LTW-C193TS5
LTW-C193TS5 by Lite-on Technology is a single color LED with a size of 1.15mm and max forward current of 0.02A. With a viewing angle of 130°, it is ideal for applications requiring ultra bright white light in compact spaces. Its surface mount feature and low operating temperature range make it suitable for various electronic devices.
LTW-C255DCKS-5A
DUAL COLOR LED;
LTW-C192TL2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 38.0; Viewing Angle: 130 deg; Size: 1.15 mm;
LTW-C230DS2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.5; Lens Type: YELLOW; Shape: RECTANGULAR;
LTW-C190DS5-CS
Diodes Incorporated
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Minimum Luminous Intensity: .045 cd;
LTW-C192TB5BINN
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 36.5; Minimum Operating Temperature: -20 Cel; Maximum Forward Current: .02 A;
LTW-C192TB5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Packing Method: TR, 7 INCH; Size: 1.15 mm;
LTW-C192TB5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; No. of Functions: 1; Additional Features: IC COMPATIBLE, SUPPORTS INFRARED;
LTW-C192TL2BINE1
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 28.0; Minimum Operating Temperature: -20 Cel; Size: 1.15 mm;
LTW-C192TL5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Additional Features: IC COMPATIBLE, SUPPORTS INFRARED; Size: 1.15 mm;
LTW-C192TL5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; Viewing Angle: 130 deg; Minimum Operating Temperature: -20 Cel;
LTW-C192TS5BINN
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 36.5; Packing Method: TR, 7 INCH; Viewing Angle: 130 deg;
LTW-C192TS5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Color: WHITE; No. of Functions: 1;
LTW-C192TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Terminal Pitch: 1.5 mm; Maximum Operating Temperature: 80 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved