Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTW-C193TS5 by Lite-on Technology is a single color LED with a size of 1.15mm and max forward current of 0.02A. With a viewing angle of 130°, it is ideal for applications requiring ultra bright white light in compact spaces. Its surface mount feature and low operating temperature range make it suitable for various electronic devices.
Median Price
$0.234
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.310
100+ parts
$0.154
1k+ parts
-
10k+ parts
DigiKey
$0.570
$0.281
$0.216
$0.202
Chip1Stop
$1.330
Future Electronics
$0.138
Verical
$0.055
RS (Exports)
$0.201
$0.133
Arrow
$0.193
$0.171
TME
$0.049
$0.045
Nova Conductors
$0.174
IBS Electronics
$0.194
Prism Electronics
A2Z Electronics, Inc.
Vyrian
Chip Stock
NAC Semi
$0.276
Schukat
$0.082
$0.056
$0.048
Cyclops Electronics Ltd
Component Sense
ACDS - Activité Composants Distribution Service
Speed Components Ltd
SPM Sales
J2 Sourcing AB
ComSIT Distribution GmbH
Bristol Electronics
Atlantic Semiconductor
Sea View Technologies
Semi Source
Aztec Data Supply Inc.
$0.070
Netroflash
$0.165
$0.162
Corohmni
$0.243
Kepictronics
Cyclops Electronics Ltd (Excess)
Assy Fe
Continental Prestige Electronics
Argo Parts USA
GreenTree Electronics
The single configuration allows for easy integration into various electronic devices.
Compact size makes it suitable for applications where space is limited.
Can handle high forward currents without overheating, ensuring reliable performance.
The yellow lens provides a unique visual appeal to the LED.
Offers a single color output for specific lighting requirements.
Simplifies the connection process, making it user-friendly.
Can operate efficiently in high-temperature environments.
Low profile design makes it suitable for thin electronic devices.
Rectangular shape allows for easy placement on circuit boards.
Can function in cold conditions without any issues.
Tin terminal finish provides corrosion resistance and enhances conductivity.
Provides a minimum brightness level for visibility in low-light conditions.
The ultra-bright white color offers high visibility and brightness.
Convenient packing method for easy handling and storage.
Withstands reverse voltages up to 5V for added protection.
Standard terminal pitch for compatibility with various circuit designs.
Wide viewing angle ensures good visibility from different perspectives.
Provides a high luminous intensity output for bright lighting applications.
Surface mount design allows for easy installation on PCBs.
Operates efficiently at a maximum forward voltage, conserving energy.
Visible LEDs LTW-C193TS5 attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTW-C193TS5 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - C190/C191/C193 01/Jun/2017
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
BSS138
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
Renesas Electronics
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semitronics
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
Sensitron Semiconductor
LST676-P2S1-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LST676-P2S1-1-Z is a 2.4mm single color LED with peak wavelength of 645nm and max forward current of 0.03A. Ideal for applications requiring super red light emission, such as indicator lights in automotive or electronic devices.
QTLP650C7TR
Everlight Electronics
Visible LEDs; Lens Type: WATER CLEAR; Peak Wavelength (nm): 660; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Maximum Forward Current: 40 A;
HLMP-4740
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.3; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-6300-F0011
Broadcom
HLMP-6300-F0011 by Broadcom is a single color LED with a peak wavelength of 635nm and a max forward current of 0.03A. It is commonly used in applications such as indicator lights, displays, and signage due to its high efficiency red color and axial mount configuration.
HLMP-1719
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Configuration: SINGLE; JESD-609 Code: e0; T-code: T-1;
TLHB4400
Vishay Telefunken
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: TINTED DIFFUSED; Maximum Forward Current: .02 A;
ASMB-MTB0-0A3A2
ASMB-MTB0-0A3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring red/green/blue colors and diffused lens. With peak wavelengths of 634/522/465nm, it has a viewing angle of 115° and nominal luminous intensity of 540.0/1600.0/350.0 mcd. Ideal for surface mount applications, it operates b/w -40 to 100 °C, with max forward current at 0.025 A and voltage at 2.6 V.
QS121XXR24
Apem Components
Visible LEDs;
HSMF-C165
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/15.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
150080BS75000
Wuerth Elektronik & Kg
150080BS75000 by Wurth Elektronik is a WATER CLEAR BLUE LED with a peak wavelength of 465nm and viewing angle of 140°. It has a size of 1.4mm, operates at temperatures from -40 to 85 °C, and has a max forward current of 0.03A. Ideal for surface mount applications requiring single color illumination.
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
4501-2-2-001
Wilbrecht Electronics
SINGLE COLOR LED;
155124BS73200
155124BS73200 LED by Wurth Elektronik is a 2mm blue single-color LED with a peak wavelength of 468nm. It has a max forward current of 0.025A and a viewing angle of 120°, making it ideal for surface mount applications in various electronic devices. With water-clear lens type and nominal luminous intensity of 150.0mcd, this LED operates b/w -40°C to 85°C temperatures efficiently.
LTL-4231NLC
Lite-on Technology
LTL-4231NLC by Lite-on Technology is a 3mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.007A and operates b/w -55 to 100°C. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
597-2723-607F
Dialight
Dialight's 597-2723-607F is a COMMON ANODE LED with 0.03A current, emitting YELLOW light at 591nm. Ideal for SURFACE MOUNT applications, it offers a viewing angle of 130° and luminous intensity of 30.0mcd. Operating b/w -55°C to 85°C, it suits various lighting needs.
HLMP-3507-D0002
HLMP-3507-D0002 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
598-8040-107F
The Dialight 598-8040-107F is a single color LED with a size of 1.1 mm and a max forward current of 0.025 A. It is commonly used in surface mount applications for its water clear lens and yellow color.
LGR971-KN-1
Osram Opto Semiconductors' LGR971-KN-1 is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm, emitting GREEN light. With max forward current of 0.025A and viewing angle of 160°, it's ideal for surface mount applications requiring green-yellow illumination at temperatures ranging from -30 to 85°C.
XHP50B-00-0000-0D0UH20E3
Cree Led
598-8020-107F
Dialight's 598-8020-107F is a single color LED with a max forward current of 0.025 A and a viewing angle of 140°. It is commonly used in surface mount applications for its red-orange color and water clear lens type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
LTW-C191TLA
LTW-C230DS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 315.0; Lens Type: YELLOW; Height: .82 mm;
LTW-C190DA5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: GREEN; Configuration: SINGLE;
LTW-C191DS5
LTW-C191DS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and luminous intensity of 125.5mcd. Ideal for applications requiring ultra bright white light, it operates b/w -30 to 85 °C with a forward current of 0.02A. This RECTANGULAR LED is designed for surface mount installation in various electronic devices.
LTW-C194TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Viewing Angle: 130 deg; Maximum Forward Current: .02 A;
LTW-C255DCKS-5A
DUAL COLOR LED;
LTW-C192TL2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 38.0; Viewing Angle: 130 deg; Size: 1.15 mm;
LTW-C230DS2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.5; Lens Type: YELLOW; Shape: RECTANGULAR;
LTW-C190DS5-CS
Diodes Incorporated
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Minimum Luminous Intensity: .045 cd;
LTW-C193SN5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.75; Lens Type: YELLOW; Height: .4 mm;
LTW-C193US2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Terminal Finish: Pure Tin (Sn); Configuration: SINGLE;
LTW-C193US5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 49.5; Terminal Finish: TIN; No. of Functions: 1;
LTW-C193DS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Terminal Finish: TIN;
LTW-C193US2BINL
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 14.6; Terminal Finish: Pure Tin (Sn); Color: WHITE;
LTW-C193US5BINN
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 36.5; Terminal Finish: Pure Tin (Sn); Additional Features: IC COMPATIBLE;
LTW-C193US5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Terminal Finish: Pure Tin (Sn); Shape: RECTANGULAR;
LTW-C193DM5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 118.0; Lens Type: YELLOW; Maximum Forward Voltage: 3.1 V;
LTW-C193SN2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: YELLOW; Additional Features: IC COMPATIBLE;
LTW-C193DC5-PA2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 136.5; Lens Type: YELLOW; Terminal Pitch: 1.3 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved