Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Minimum Luminous Intensity: .045 cd;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Visible LEDs LTW-C190DS5-CS attributes and parameters. Explore more Visible LEDs devices from Diodes Incorporated
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Maximum Reverse Voltage:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
LTW-C190DS5-CS Optoelectronics trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.40.20.00
SB
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
2N2222A
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
Bytesonic Electronics
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Hitachi
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
American Power Devices
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
598-8610-307F
Dialight
Dialight's 598-8610-307F is a COMMON ANODE, TRIPLE COLOR LED with 0.02A max current. It features RED/GREEN/BLUE colors, WATER CLEAR lens, and 140° viewing angle. Ideal for surface mount applications requiring vibrant RGB illumination in a compact form factor.
HLMP-4000#002
Hewlett Packard
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 3; Nominal Luminous Intensity (mcd): 5/8; Lens Type: DIFFUSED; Terminal Pitch: 1.27 mm;
LGR971
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 26.05; Lens Type: COLORLESS DIFFUSED; Terminal Finish: TIN;
SML-LXR44SRC-TR
Lumex
SML-LXR44SRC-TR by Lumex is a 2.4mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring a clear lens SUPER RED light source, such as indicator lights in electronic devices due to its surface mounting feature and 90° viewing angle.
APT1608LZGCK
Kingbright Electronic
Kingbright Electronic's APT1608LZGCK is a 1.2mm SINGLE COLOR LED with peak wavelength of 515nm and 50.0mcd luminous intensity. Ideal for surface mount applications, it operates b/w -40 to 85°C, making it suitable for various visible LED lighting projects.
KPT-1608EC
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: WATER CLEAR; Size: 1.2 mm;
151051BS04000
Wuerth Elektronik & Kg
151051BS04000 by Wurth Elektronik is a 4.9mm SINGLE COLOR LED with 0.03A forward current and peak wavelength of 465nm. Ideal for applications requiring blue light emission, such as indicator lights in electronic devices due to its diffused lens type and radial mount feature.
L-937EGW
DUAL COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 20.0; Lens Type: DIFFUSED WHITE; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu);
3040
Wilbrecht Electronics
SINGLE COLOR LED;
SML-LX1610RGBW/A
The Lumex SML-LX1610RGBW/A is a COMMON ANODE, 3 ELEMENTS LED with 0.3A max current and 625/525/470nm peak wavelengths. Ideal for TRIPLE COLOR illumination in applications like signage, displays, and indicators. Features WATER CLEAR lens, 110° viewing angle, and SURFACE mounting.
5310F5
Industrial Devices
Visible LEDs; Lens Type: DIFFUSED; Color At Wavelength: Green; Height: 11 mm; Viewing Angle: 90 deg; Maximum Forward Current: .03 A;
LSGT676-P7Q7-1+N7P7-24-ZB
Osram Opto Semiconductors' LSGT676-P7Q7-1+N7P7-24-ZB is a dual color LED with separate configuration and 2.4mm size. It has a max forward current of 0.03A and peak wavelengths of 645nm (hyper bright super red) and 572nm (hyper bright green). This LED is suitable for surface mount applications requiring a viewing angle of 120°.
LTST-C170KGKT
Lite-on Technology
LTST-C170KGKT by Lite-on Technology is a 1.4mm GREEN LED with WATER CLEAR lens. It has a peak wavelength of 574nm, forward current of 0.03A, and luminous intensity of 35.0mcd. Ideal for surface mount applications in electronics due to its compact size and wide viewing angle of 130°.
VLMU3500-385-060
HSMF-C114
Agilent Technologies
TRIPLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 85.0/180.0/70.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
HLMP-1301-E0002
Broadcom
HLMP-1301-E0002 by Broadcom is a 3mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and nominal luminous intensity of 4.95mcd. Ideal for applications requiring high efficiency red light emission, such as indicator lights in electronic devices.
HLMP-1790-A00A1
Broadcom's HLMP-1790-A00A1 is a 3mm single color LED with peak wavelength of 565nm. With max forward current of 0.007A, it emits green light at 2.3mcd luminous intensity. Ideal for applications requiring a compact, low-power consumption light source.
HLMP-1700
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: CMOS COMPATIBLE; No. of Functions: 1; Configuration: SINGLE;
551-1307-004F
Dialight's 551-1307-004F is a 3mm single color LED array with 4 separate elements. It has a peak wavelength of 565nm, max forward current of 0.007A, and max forward voltage of 2.5V. Ideal for applications requiring green light emission in a radial mount configuration.
XHP70B-00-0000-0D0HP20E3
Wolfspeed
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
LTW-C191TLA
Visible LEDs;
LTW-C230DS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 315.0; Lens Type: YELLOW; Height: .82 mm;
LTW-C190DA5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: GREEN; Configuration: SINGLE;
LTW-C191DS5
LTW-C191DS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and luminous intensity of 125.5mcd. Ideal for applications requiring ultra bright white light, it operates b/w -30 to 85 °C with a forward current of 0.02A. This RECTANGULAR LED is designed for surface mount installation in various electronic devices.
LTW-C194TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Viewing Angle: 130 deg; Maximum Forward Current: .02 A;
LTW-C255DCKS-5A
DUAL COLOR LED;
LTW-C192TL2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 38.0; Viewing Angle: 130 deg; Size: 1.15 mm;
LTW-C230DS2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.5; Lens Type: YELLOW; Shape: RECTANGULAR;
LTW-C193TS5
LTW-C193TS5 by Lite-on Technology is a single color LED with a size of 1.15mm and max forward current of 0.02A. With a viewing angle of 130°, it is ideal for applications requiring ultra bright white light in compact spaces. Its surface mount feature and low operating temperature range make it suitable for various electronic devices.
LTW-C193SN5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 90.75; Lens Type: YELLOW; Height: .4 mm;
LTW-C193DS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Terminal Finish: TIN;
LTW-C191DS5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; Terminal Finish: PURE TIN; Packing Method: TR, 7 INCH;
LTW-C191DS5BINR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 146.0; Terminal Finish: PURE TIN; Maximum Operating Temperature: 85 Cel;
LTW-C193DM5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 118.0; Lens Type: YELLOW; Maximum Forward Voltage: 3.1 V;
LTW-C193SN2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 63.0; Lens Type: YELLOW; Additional Features: IC COMPATIBLE;
LTW-C191TL5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Terminal Pitch: 1.5 mm;
LTW-C190DS5-CS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Height: .8 mm;
LTW-C193DC5-PA2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 136.5; Lens Type: YELLOW; Terminal Pitch: 1.3 mm;
Diodes Incorporated
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved