Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Dialight's 553-0212F is a dual color LED array with separate, 2-element configuration. It has peak wavelengths of 650nm for green and 563nm for red, ideal for status indicators in electronics. With a max forward current of 0.007A and operating temperatures from -55°C to 100°C, it offers reliable performance in various applications.
Median Price
$2.488
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$2.457
100+ parts
$1.292
1k+ parts
$1.009
10k+ parts
-
Chip1Stop
$2.518
$1.142
$0.987
Farnell
$2.764
$1.125
$1.063
Element14
$3.700
$2.070
$1.800
Sager
$1.210
$1.000
$0.941
Master Electronics
$2.260
$1.220
$1.100
TTI Europe
$1.005
$0.972
Verical
$3.412
$3.000
Nova Conductors
$1.048
Component Sense
IBS Electronics
$1.332
$1.262
VNN
Electro Sonic
$1.076
$0.920
$0.901
Vyrian
LIBRA Elektronik GmbH
Rapid Electronics
$1.694
Martec Srl
NAC Semi
$1.900
TME
$1.510
$1.360
Halfin
R&J Components
Semi Source
Prism Electronics
Aztec Data Supply Inc.
$0.273
Corohmni
$0.514
Semicontronic
$0.700
$0.682
$0.679
Argo Parts USA
$1.033
Netroflash
$1.027
Ampacity Inc.
$1.530
Continental Prestige Electronics
$3.490
$1.450
$1.170
Perfect Parts
Cyclops Electronics Ltd (Excess)
Having separate 2 elements allows for dual color functionality, providing versatility in lighting options.
Compact size makes it suitable for small electronic devices or applications where space is limited.
Low maximum forward current helps in energy efficiency and prevents overheating.
Dual peak wavelength allows for red and green color output, enhancing visual appeal.
Dual color LED array provides flexibility in lighting design and color options.
Minimum luminous intensity ensures adequate brightness for visibility in various lighting conditions.
Red and green color output allows for a wide range of lighting applications and color mixing possibilities.
Radial mounting feature makes installation and soldering easier in circuit board applications.
Low maximum forward voltage ensures compatibility with a variety of power sources and circuits.
Visible LEDs 553-0212F attributes and parameters. Explore more Visible LEDs devices from Dialight
Additional Features:
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of LEDs in Array:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
Sub-Category:
T-code:
Terminal Finish:
Terminal Pitch:
553-0212F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - 550/551/553 Assembly Trsf 27/Mar/2018
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
LL4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Fairchild Semiconductor
2N7002
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
LM358MX
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
Jinan Jingheng Electronics
Micro Commercial Components
HLMP4700
Cml Technologies & Kg
HLMP4700 by Cml Technologies & Kg is a 5mm SINGLE COLOR LED with peak wavelength of 635nm. It has max forward current of 0.0075A and viewing angle of 35°. Ideal for applications requiring red light emission, such as indicator lights in electronic devices.
SSL-LX2573GD
Lumex
SSL-LX2573GD by Lumex is a 5mm green LED with a peak wavelength of 565nm. It has a max forward current of 0.025A and operates b/w -40 to 85°C. Ideal for applications requiring a diffused light source, such as indicator lights in electronic devices.
LTST-C170TBKT
Lite-on Technology
LTST-C170TBKT by Lite-on Technology is a 1.4mm BLUE LED with WATER CLEAR lens, peak wavelength of 468nm, and max forward current of 0.02A. Ideal for surface mount applications in electronics due to its compact size, high luminous intensity of 130cd, and wide viewing angle of 130°.
HSMM-A100-S00J1
Broadcom
HSMM-A100-S00J1 by Broadcom is a 2.2mm SINGLE COLOR LED with peak wavelength of 523nm and max forward current of 0.03A. Ideal for applications requiring GREEN light emission, such as indicator lights in electronic devices due to its compact size and surface mounting feature.
KP-2012QBC-D
Kingbright
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 100.0; Lens Type: WATER CLEAR; Peak Wavelength (nm): 468;
555-2003F
Dialight
Dialight's 555-2003F is a 2mm single color LED with built-in resistor. It operates at -40 to 85°C, with peak wavelength of 650nm and forward current of 0.008A. Ideal for bulk applications requiring red light emission and radial mounting, offering a viewing angle of 90° and luminous intensity of 2.2mcd.
HSMY-C170
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.25; Lens Type: DIFFUSED; No. of Functions: 1;
OVLAW4CB7
Optek Technology
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 3500.0; Lens Type: WATER CLEAR; Packing Method: TR;
SSF-LXH100YD
The Lumex SSF-LXH100YD is a 5mm yellow LED with a peak wavelength of 585nm and a viewing angle of 60°. It has a built-in resistor, operates at temperatures from -40°C to 85°C, and has a luminous intensity of 30.0mcd. Ideal for applications requiring a reliable, bright yellow light source in various electronic devices.
HLMP1700
Aborn Electronics
Visible LEDs; Lens Type: DIFFUSED; Height: 4.3 mm; Peak Wavelength (nm): 635; Minimum Operating Temperature: -55 Cel; Maximum Forward Current: .007 A;
BR1111C-TR
Stanley Electric
Stanley Electric's BR1111C-TR is a 1.2mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.025A. Ideal for surface mount applications, it offers a viewing angle of 141° and nominal luminous intensity of 11.7mcd, making it suitable for various visible LED lighting projects.
HLMP-1719
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2.1; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LTST-S270KRKT
LTST-S270KRKT by Lite-on Technology is a 1.2mm WATER CLEAR LED with peak wavelength of 639nm and max forward current of 0.03A. Ideal for applications requiring a red light source, such as indicator lights in electronic devices due to its high luminous intensity of 130cd at 2.4V forward voltage.
LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B
Osram Opto Semiconductors
Osram Opto Semiconductors' LRTBGVTG-U5V5-1+A5B5-29+S9T9-49-20-R33-B is a 2.8mm TRIPLE COLOR LED with peak wavelengths of 632/523/465nm, diffused lens, and max forward current of 0.04A. Ideal for surface mount applications in electronics requiring red/true green/blue illumination with a viewing angle of 120° and luminous intensity up to 2200mcd.
HLMP-3507
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 5.2; Lens Type: TINTED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
CMD15-21VGC/TR8
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10.0; Lens Type: CLEAR; Maximum Forward Current: .025 A;
XHP70B-00-0000-0D0HP20E3
Cree Led
LED LAMP;
SSL-LX3059IGW-CA
SSL-LX3059IGW-CA by Lumex is a 3mm dual color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 635nm/565nm. Ideal for applications requiring diffused milky white light output, such as indicator lights in electronic devices.
KP-2012SGC
Kingbright Electronic
KP-2012SGC by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with a peak wavelength of 565nm and max forward current of 0.025A. Ideal for applications requiring SUPER BRIGHT GREEN illumination, such as indicator lights in electronic devices due to its WATER CLEAR lens and 120° viewing angle.
XHP35A-00-0000-0D0BD440E
Wolfspeed
Wolfspeed's XHP35A-00-0000-0D0BD440E is a 2.8mm high SINGLE COLOR LED with max forward current of 1.05A and min luminous intensity of 125cd. Ideal for applications requiring white light at a wavelength, with max forward voltage of 11.9V and reverse voltage of 5V.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
553-0133-200F
Dialight's 553-0133-200F is a 3mm LED array with separate, 2-element configuration. It has a peak wavelength of 585/565nm and max forward current of 0.02A. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
553-0111-200F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
553-0222-200F
Dialight's 553-0222-200F is a 3mm green LED array with separate, 2-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring low power consumption and high luminous intensity in a compact size.
553-0111F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .02 A;
553-0112-200F
Dialight's 553-0112-200F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelengths of 635nm (red) and 565nm (green), it has a size of 3mm and nominal luminous intensities of 10.0/12.6 mcd. Ideal for applications requiring radial mounting, this LED array is suitable for visual indication in various electronic devices.
553-0312F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Maximum Forward Current: .02 A;
553-0311F
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
553-0212-200F
Dialight's 553-0212-200F is a dual color LED array with separate, 2-element configuration. Featuring red/green colors and diffused lens type, it has peak wavelengths of 635nm/565nm. Ideal for applications requiring radial mount LEDs with nominal luminous intensity of 10.0/12.6 mcd at a viewing angle of 60°.
553-0322F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); T-code: T-1;
553-0221F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Size: 3 mm;
553-0222F
Dialight's 553-0222F is a 3mm green LED array with separate, 2-element configuration. It has a max forward current of 0.007A and peak wavelength of 563nm. Ideal for radial mounting, it operates b/w -55°C to 100°C and offers a viewing angle of 60°.
5530102004F
SINGLE COLOR LED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
5530102002F
553-0122-300F
Dialight's 553-0122-300F is a 3mm green LED array with separate, 2-element configuration. It has a peak wavelength of 563nm and max forward current of 0.01A. Ideal for applications requiring single color illumination in electronic devices.
553-0122-306F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 24; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Shape: ROUND;
553-0744F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 4.3/6.3; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
5530122303F
SINGLE COLOR LED ARRAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
553-0112F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Packing Method: BAG;
553-0210F
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); T-code: T-1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved