Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Dialight's 553-0744F is a 3mm dual-color LED array with diffused lens, featuring 2 elements and common bipolar terminal. With peak wavelengths of 585nm and 565nm, it has max forward current of 0.02A. Ideal for applications requiring yellow/green light output in bulk packaging, with radial mounting feature.
Median Price
$2.224
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.443
100+ parts
$1.358
1k+ parts
$1.344
10k+ parts
-
Arrow
$3.155
$1.780
$1.242
DigiKey
$3.220
$1.831
$1.530
$1.399
Future Electronics
$1.150
$1.120
Master Electronics
$1.890
$1.430
$1.340
Verical
$1.847
TTI
$1.360
$1.290
$1.220
Nova Conductors
$1.291
Bristol Electronics
$2.400
$1.488
IBS Electronics
$1.711
$1.683
Vyrian
NAC Semi
$2.360
$2.150
VNN
Connector Distribution Corp
Right Parts Inc.
Sensible Micro Corp
Electronics Depot
Electro Sonic
$1.900
$1.420
Semi Source
Prism Electronics
PC Components Company LLC
Rebound Electronics
EMSNET
Sea View Technologies
Corohmni
$0.398
Aztec Data Supply Inc.
$0.772
Semicontronic
$0.790
$0.770
$0.766
Ampacity Inc.
Argo Parts USA
Continental Prestige Electronics
$1.265
Authorized Procurement Solutions
Perfect Parts
Assy Fe
Netroflash
$1.227
$1.201
Resion (Excess)
This configuration allows for two different colors (green and yellow) in one LED array, providing versatility in color options for various applications.
Compact size makes it suitable for applications where space is limited, without compromising on functionality.
Low forward current consumption helps in reducing power usage and increasing energy efficiency.
The dual color LED array offers peak wavelengths in the green and yellow spectrum, ideal for creating colorful displays or indicators.
The diffused lens helps in dispersing light evenly, making it suitable for applications where uniform illumination is required.
With relatively high luminous intensity, this LED array ensures bright and visible lighting output.
Capable of operating at high temperatures, making it suitable for industrial or outdoor environments where heat can be a factor.
Radial mounting feature allows for easy installation and secure placement on PCBs or other surfaces.
Visible LEDs 553-0744F attributes and parameters. Explore more Visible LEDs devices from Dialight
Color:
Color At Wavelength:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Peak Wavelength (nm):
Shape:
Size:
T-code:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
553-0744F Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - Mult Series Assembly Trsf 27/Nov/2018
Dialight is the world leader in LED industrial lighting technology with millions of LED fixtures installed worldwide. Our story began in 1938 in Brooklyn, NY, where we produced instrument panel lights for aircraft. In 1971, just one year after the introduction of the LED, we launched our first LED product. Since then, we have revolutionized the use of LEDs and ONLY LEDs, to provide superior lighting for traffic control, indicators, structural towers and industrial work sites around the world. We see a world where heavy industry is transformed to be safer, more productive, and environmentally friendly through illumination. We enable industrial customers operating in demanding environments to reduce their energy costs, maintenance costs, and carbon footprint while maximizing the safety and productivity of their facilities. From our signature High Bay line to our versatile Linear fixtures, Dialight offers the largest selection of rugged, cutting edge products to suit virtually any industrial application. With over 50 years of industrial LED lighting experience and the largest installed base in the world, we are here to help you identify a lighting solution that meets your specific needs.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
SN6505BDBVR
Texas Instruments
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
SS14
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Bytesonic Electronics
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
PIC18F4550-I/P
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
LM317D2TG
LM317D2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max output voltage of 37V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
HSMS-C170
Agilent Technologies
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 10; Lens Type: DIFFUSED; Terminal Finish: Gold (Au);
CLVBA-FKA-CAEDH8BBB7A363
Wolfspeed
Wolfspeed's CLVBA-FKA-CAEDH8BBB7A363 is a COMMON ANODE TRIPLE COLOR LED with 0.025 A max forward current, 2.4 V max forward voltage, and 147.5/295.0/74.0 mcd nominal luminous intensity. Ideal for applications requiring RGB illumination in compact spaces with surface mounting feature.
HSMG-C120
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 15.0; Lens Type: UNTINTED NONDIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
LGR971
LGR971 by Infineon Technologies is a 1.3mm SINGLE COLOR LED with peak wavelength of 570nm, emitting GREEN light. It has a max forward current of 0.025A and operates b/w -30°C to 95°C. Ideal for applications requiring diffused green light with a wide viewing angle of 160°.
XHP35B-H0-0000-0D0UB440G
SINGLE COLOR LED;
HLMP-3301
Quality Technologies
SINGLE COLOR LED; Shape: ROUND; No. of Functions: 1; Size: 5 mm; Maximum Forward Current: .03 A; Color: HIGH EFFICIENCY RED;
APBA3010SURKCGKC-GX
Kingbright Electronic
APBA3010SURKCGKC-GX by Kingbright Electronic is a 2mm dual color LED with common anode configuration. It has a max forward current of 0.03A and peak wavelengths of 650nm/574nm, suitable for applications requiring hyper red/green illumination in compact spaces. With a viewing angle of 140° and water clear lens type, it is ideal for surface mount installations in various electronic devices.
1312
Wilbrecht Electronics
HSMH-C190
Hewlett Packard
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 11.65; Lens Type: DIFFUSED; Peak Wavelength (nm): 660;
MSL0104RGBU12Y
ROHM
ROHM's MSL0104RGBU12Y is a 5.4mm TRIPLE COLOR LED with separate configuration and built-in ZENER DIODE. It has max forward current of 0.04A, operates b/w -40 to 85°C, and offers red/green/blue colors. Ideal for surface mount applications requiring nominal luminous intensity of 700/1200/400 mcd.
HLMP4740
Morrihan International
Visible LEDs; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); Height: 8.8 mm; Viewing Angle: 50 deg; Maximum Forward Current: .007 A;
QTLP650C2TR
Everlight Electronics
The Everlight Electronics QTLP650C2TR is a 2mm single color LED with peak wavelength of 635nm. It has a max forward current of 0.03A and viewing angle of 140°, making it ideal for high efficiency red lighting applications in various industries. With water clear lens and surface mounting feature, this LED operates b/w -40°C to 85°C temperature range.
HLMP-4700
Qt Optoelectronics
SINGLE COLOR LED; Mounting Feature: RADIAL MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 2; Lens Type: RED DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
15335339AA350
Wuerth Elektronik & Kg
Wurth Elektronik's 15335339AA350 is a 2.6mm UV LED with 0.8A forward current and 395nm peak wavelength. Ideal for surface mount applications, it features built-in ESD protection and operates b/w -40°C to 85°C.
559-5101-007F
Dialight
Dialight's 559-5101-007F is a 5mm red LED with peak wavelength of 650nm. It has a max forward current of 0.02A and viewing angle of 50°. Ideal for panel mount applications, this single color LED operates b/w -55 to 100 °C, offering a luminous intensity of 34.0mcd.
L-7104EC
The Kingbright Electronic L-7104EC is a 3mm SINGLE COLOR LED with a peak wavelength of 627nm and max forward current of 0.03A. Ideal for applications requiring HIGH EFFICIENCY RED light emission, such as indicator lights in electronic devices. With WATER CLEAR lens type, it offers a viewing angle of 34° and nominal luminous intensity of 60.0mcd.
XHP35B-00-0000-0D0UB227G
HLMP-3507-D0001
Broadcom
HLMP-3507-D0001 by Broadcom is a 5mm single color LED with peak wavelength of 565nm. It has a max forward current of 0.03A and viewing angle of 60°. Ideal for applications requiring high performance green light emission in radial mounting configurations.
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
LGR971-LM
Osram Opto Semiconductors
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 19.6; Lens Type: COLORLESS DIFFUSED; Terminal Finish: Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
553-0133-200F
Dialight's 553-0133-200F is a 3mm LED array with separate, 2-element configuration. It has a peak wavelength of 585/565nm and max forward current of 0.02A. Ideal for applications requiring yellow light emission, such as indicator lights in electronic devices.
553-0111-200F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0; Lens Type: DIFFUSED; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag);
553-0222-200F
Dialight's 553-0222-200F is a 3mm green LED array with separate, 2-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring low power consumption and high luminous intensity in a compact size.
553-0111F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .02 A;
553-0112-200F
Dialight's 553-0112-200F is a dual color LED array with separate, 2-element configuration. Featuring peak wavelengths of 635nm (red) and 565nm (green), it has a size of 3mm and nominal luminous intensities of 10.0/12.6 mcd. Ideal for applications requiring radial mounting, this LED array is suitable for visual indication in various electronic devices.
553-0312F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Maximum Forward Current: .02 A;
553-0311F
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
553-0212-200F
Dialight's 553-0212-200F is a dual color LED array with separate, 2-element configuration. Featuring red/green colors and diffused lens type, it has peak wavelengths of 635nm/565nm. Ideal for applications requiring radial mount LEDs with nominal luminous intensity of 10.0/12.6 mcd at a viewing angle of 60°.
553-0322F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); T-code: T-1;
553-0221F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Copper/Nickel/Silver (Cu/Ni/Ag); Size: 3 mm;
553-0212F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Tin (Sn); Maximum Forward Current: .007 A;
553-0222F
Dialight's 553-0222F is a 3mm green LED array with separate, 2-element configuration. It has a max forward current of 0.007A and peak wavelength of 563nm. Ideal for radial mounting, it operates b/w -55°C to 100°C and offers a viewing angle of 60°.
5530102004F
SINGLE COLOR LED; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
5530102002F
553-0122-300F
Dialight's 553-0122-300F is a 3mm green LED array with separate, 2-element configuration. It has a peak wavelength of 563nm and max forward current of 0.01A. Ideal for applications requiring single color illumination in electronic devices.
553-0122-306F
SINGLE COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 24; Nominal Luminous Intensity (mcd): 16.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Shape: ROUND;
5530122303F
SINGLE COLOR LED ARRAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1;
553-0112F
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 10.0/16.0; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Packing Method: BAG;
553-0744-006
DUAL COLOR LED ARRAY; Mounting Feature: RADIAL MOUNT; No. of Terminals: 24; Nominal Luminous Intensity (mcd): 4.3/6.3; Terminal Finish: Tin/Lead (Sn/Pb); Terminal Pitch: 2.54 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved