Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
Median Price
$0.122
Lifecycle Status
Suppliers In-Stock
28
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.500
100+ parts
$0.248
1k+ parts
$0.177
10k+ parts
$0.150
DigiKey
-
$0.155
Future Electronics
Arrow
Avnet
$0.039
Chip1Stop
$0.042
RS (Exports)
$0.291
$0.195
Verical
$0.075
$0.052
Nova Conductors
$0.202
TME
$0.206
$0.076
$0.054
Bristol Electronics
$0.263
$0.131
$0.033
Voyager Components
$0.548
Chip Stock
IBS Electronics
$0.171
Schukat
$0.070
$0.044
$0.036
ComSIT Distribution GmbH
Vyrian
Ack Elektronik San.Tic.Ltd.Sti
Classic Components Corporation
SPM Sales
NAC Semi
$0.222
Rutronik
$0.061
Semtec, LLC
J2 Sourcing AB
Sea View Technologies
Sensible Micro Corp
Elcom Components
Prism Electronics
Semicontronic
$0.035
Advanced Electronics
$0.193
$0.166
Continental Prestige Electronics
$0.198
Argo Parts USA
$0.196
Aztec Data Supply Inc.
$0.350
Corohmni
$0.682
Kepictronics
Authorized Procurement Solutions
RC Electronics
FE SAS
Glotronic Ltd.
GreenTree Electronics
Assy Fe
Single configuration allows for easy integration into various electronic circuits and designs.
Compact size enables this LED to be used in small electronic devices and tight spaces.
Low forward current consumption helps in energy efficiency and longer battery life.
Single color LED provides consistent and uniform light output for specific applications.
Having only 2 terminals simplifies the connection process and reduces complexity.
High maximum operating temperature ensures reliability and stability in various environments.
Low height makes it suitable for slim and compact electronic designs.
Rectangular shape offers versatility in placement and mounting options.
Wide range of operating temperatures allows for use in both hot and cold conditions.
Tin terminal finish provides good conductivity and solderability for easy assembly.
White color LED is versatile and can be used in a wide range of lighting applications.
Tray packing method with 7-inch size makes handling and storage convenient.
Standard terminal pitch allows for compatibility with various circuit board layouts.
Wide viewing angle ensures good visibility and coverage of light output.
High luminous intensity provides bright and noticeable illumination for the application.
Surface mount feature simplifies the installation process and ensures secure attachment.
Visible LEDs LTW-C191TS5 attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Configuration:
Maximum Forward Current:
JESD-609 Code:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
Terminal Finish:
Terminal Pitch:
Viewing Angle:
LTW-C191TS5 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
PCN Assembly/Origin - C190/C191/C193 01/Jun/2017
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
Zowie Technology
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
CMD15-21UGC/TR8
Chicago Miniature Lighting
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 12.0; Lens Type: CLEAR; Height: 1.1 mm;
553-0311F
Dialight
Dialight's 553-0311F is a 3mm red LED array with 2 separate elements, each with built-in resistor. It has a peak wavelength of 650nm and max forward current of 0.02A. Ideal for applications requiring low luminous intensity and a viewing angle of 60°, such as indicator lights in electronic devices.
553-0133F
Dialight's 553-0133F is a 3mm yellow LED array with 2 separate elements. It has a peak wavelength of 585nm, forward current of 0.02A, and luminous intensity of 6.3mcd. Ideal for applications requiring a single color light source with radial mounting in electronics or signaling devices.
598-8110-107F
Dialight's 598-8110-107F is a single color LED with water clear lens, 1.2mm size, and red color. It has a max forward current of 0.025A and viewing angle of 140°. Ideal for surface mount applications requiring a compact rectangular shape and nominal luminous intensity of 40mcd at an operating temperature range from -30°C to 85°C.
HLMP-1301-G0000
Broadcom
Broadcom's HLMP-1301-G0000 is a 3mm single color LED with peak wavelength of 635nm. With max forward current of 0.03A, it offers high efficiency red light for various applications like indicators and displays. Operating b/w -55°C to 100°C, this LED has a viewing angle of 60° and nominal luminous intensity of 12.6mcd.
1.90.690.269/0000
Rafi & Kg
1.90.690.269/0000 by Rafi & Kg is a 3mm red LED with max current of 0.05A, T-1 code, and radial mount feature. Ideal for indicator lights in electronics due to its single color configuration and round shape.
HSMG-C120
HSMG-C120 by Broadcom is a 1.2mm single color LED with peak wavelength of 570nm, ideal for applications requiring green light emission. With a max forward current of 0.02A and viewing angle of 155°, it's suitable for surface mount configurations in various electronic devices. Operating b/w -40°C to 85°C, this LED offers clear untinted nondiffused lighting with a nominal luminous intensity of 15.0mcd.
569-0107-777F
Dialight's 569-0107-777F is a 3mm orange LED array with 4 separate elements. It has a peak wavelength of 600nm, forward current of 0.025A, and luminous intensity of 7.0mcd. Ideal for applications requiring radial mounting and a viewing angle of 60° in bulk packaging.
LTST-C191KRKT
Lite-on Technology
LTST-C191KRKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 639nm, emitting RED light at 54.0mcd luminous intensity. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55 to 85°C, making it suitable for various electronic devices.
HLMP-1790
Hewlett Packard
SINGLE COLOR LED; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb); T-code: T-1; Maximum Forward Voltage: 2.2 V; Viewing Angle: 50 deg;
UHD1110-FKA-CL1A13R3Q1BBQFMF3
Wolfspeed
UHD1110-FKA-CL1A13R3Q1BBQFMF3 by Wolfspeed is a COMMON ANODE TRIPLE COLOR LED with 4 terminals. It has a Max Forward Current of 0.01 A and Max Operating Temperature of 85°C. Ideal for applications requiring RGB color output in compact spaces.
LGL29K-F2J1-24
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-F2J1-24 is a 1.3mm single color LED with peak wavelength of 572nm and max forward current of 0.02A. Ideal for applications requiring green light, it has a viewing angle of 160° and nominal luminous intensity of 3.5mcd, suitable for surface mount installations in various electronic devices.
XHP70B-00-0000-0D0HP250G
Cree Led
LED LAMP;
XHP35B-00-0000-0D0BD40E7
SINGLE COLOR LED;
APT2012SRCPRV
Kingbright Electronic
APT2012SRCPRV by Kingbright Electronic is a 1.3mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER BRIGHT RED illumination, such as indicator lights in electronic devices due to its water clear lens and surface mounting feature.
CMD15-21VGD/TR8
Cml Technologies & Kg
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 6.5; Lens Type: DIFFUSED; Height: 1.1 mm;
APHBM2012SURKCGKC
Kingbright
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 200.0/50.0; Lens Type: WATER CLEAR; Height: .45 mm;
XHP35B-00-0000-0D0HC430E
ASMB-MTB1-0B3A2
ASMB-MTB1-0B3A2 by Broadcom is a 2.4mm TRIPLE COLOR LED with COMMON ANODE, featuring peak wavelengths of 634/522/465nm and diffused lens. With max forward current of 0.025A, it offers red/green/blue colors and surface mounting for applications requiring high luminous intensity up to 2675mcd at a viewing angle of 115°.
597-7721-507F
Dialight's 597-7721-507F is a dual-color LED with peak wavelengths of 585/570nm. It has separate, 2-element configuration and water-clear lens. Ideal for surface mount applications, it offers max forward current of 0.025A and viewing angle of 100°.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTW-C191TLA
Visible LEDs;
LTW-C230DS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 315.0; Lens Type: YELLOW; Height: .82 mm;
LTW-C190DA5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: GREEN; Configuration: SINGLE;
LTW-C191DS5
LTW-C191DS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and luminous intensity of 125.5mcd. Ideal for applications requiring ultra bright white light, it operates b/w -30 to 85 °C with a forward current of 0.02A. This RECTANGULAR LED is designed for surface mount installation in various electronic devices.
LTW-C194TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Viewing Angle: 130 deg; Maximum Forward Current: .02 A;
LTW-C255DCKS-5A
DUAL COLOR LED;
LTW-C192TL2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 38.0; Viewing Angle: 130 deg; Size: 1.15 mm;
LTW-C230DS2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.5; Lens Type: YELLOW; Shape: RECTANGULAR;
LTW-C193TS5
LTW-C193TS5 by Lite-on Technology is a single color LED with a size of 1.15mm and max forward current of 0.02A. With a viewing angle of 130°, it is ideal for applications requiring ultra bright white light in compact spaces. Its surface mount feature and low operating temperature range make it suitable for various electronic devices.
LTW-C190DS5-CS
Diodes Incorporated
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Minimum Luminous Intensity: .045 cd;
LTW-C191DS5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; Terminal Finish: PURE TIN; Packing Method: TR, 7 INCH;
LTW-C191DS5BINR
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 146.0; Terminal Finish: PURE TIN; Maximum Operating Temperature: 85 Cel;
LTW-C191TB5BINN
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 36.5; Color: BLUISH WHITE; Size: 1.1 mm;
LTW-C191TB5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Height: .55 mm; Color: BLUISH WHITE;
LTW-C191TB5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; Maximum Operating Temperature: 80 Cel; Viewing Angle: 130 deg;
LTW-C191TL5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Size: 1.1 mm; Shape: RECTANGULAR;
LTW-C191TS5BINQ
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 91.5; Shape: RECTANGULAR; Configuration: SINGLE;
LTW-C191US5BINP
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 58.0; Terminal Finish: Pure Tin (Sn); Color: WHITE;
LTW-C191TB5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Terminal Pitch: 1.5 mm; Color: BLUISH WHITE;
LTW-C191DS-HT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 757.5; Lens Type: YELLOW; Height: .55 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved