Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LTW-C230DS by Lite-on Technology is a single color LED with a yellow lens. It has a max forward current of 0.02 A and a viewing angle of 130°. This LED is suitable for surface mount applications requiring ultra bright white light.
Median Price
$0.108
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Arrow
1+ parts
$0.004
100+ parts
-
1k+ parts
10k+ parts
DigiKey
$0.360
$0.176
$0.133
Mouser Electronics
$0.177
$0.117
Verical
Avnet
RS (Exports)
$0.109
Chip1Stop
Ozdisan Elektronik
$0.059
Nova Conductors
$0.157
IBS Electronics
$0.064
Vyrian
NAC Semi
$0.154
ComSIT Distribution GmbH
Prism Electronics
Extreme Components
Argo Parts USA
$0.152
Continental Prestige Electronics
Netroflash
Corohmni
$0.186
Aztec Data Supply Inc.
$0.640
Kepictronics
Authorized Procurement Solutions
iodParts Technologies Inc.
EMSNET (Excess)
Assy Fe
Glotronic Ltd.
The single configuration of this visible LED ensures simplicity and ease of use.
With its compact size, this LED can be used in various applications with space constraints.
This LED offers a single function, making it straightforward and efficient for specific lighting needs.
With a high maximum forward current, this LED can provide bright illumination without the risk of overheating.
The yellow lens adds versatility to the LED, allowing for different lighting effects and applications.
As a single color LED, this product provides consistent light output for uniform illumination.
With only two terminals, this LED ensures simplicity during installation and connection.
The high maximum operating temperature allows this LED to withstand demanding environments and maintain performance.
The low profile height of this LED makes it suitable for applications where space is limited.
The rectangular shape of this LED offers a wider beam angle, ensuring better light distribution.
With a low minimum operating temperature, this LED is suitable for outdoor and extreme temperature applications.
Despite its compact size, this LED maintains a minimum luminous intensity for sufficient brightness.
The ultra-bright white color provides clear and crisp illumination, enhancing visibility in various settings.
The TR, 7 INCH packing method ensures convenient handling and storage, ideal for bulk orders.
With a wide terminal pitch, this LED allows for easy soldering and connection to external circuits.
The wide viewing angle of 130° ensures better light dispersion and coverage.
The high nominal luminous intensity of this LED guarantees a bright and vibrant output.
The surface mount feature simplifies the installation process and enables seamless integration.
With a high maximum forward voltage, this LED can operate efficiently and deliver consistent performance.
Visible LEDs LTW-C230DS attributes and parameters. Explore more Visible LEDs devices from Lite-on Technology
Additional Features:
Color:
Configuration:
Maximum Forward Current:
Maximum Forward Voltage:
Lens Type:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
Mounting Feature:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Height:
Packing Method:
Shape:
Size:
Terminal Pitch:
Viewing Angle:
LTW-C230DS Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRG0805F10K
TE Connectivity
TE Connectivity's CRG0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in various electronic circuits due to its compact size and high temperature rating.
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
L78L05ABZ-AP
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
158563427
Wuerth Elektronik & Kg
SINGLE COLOR LED;
JE2835AWT-00-0000-000A0HG830E
Cree Led
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Shape: RECTANGULAR; Color: WARM WHITE; Maximum Operating Temperature: 105 Cel;
LTST-C193KGKT-5A
Lite-on Technology
LTST-C193KGKT-5A by Lite-on Technology is a single color LED with peak wavelength of 574nm, viewing angle of 130°, and luminous intensity of 16.25mcd. Ideal for surface mount applications in electronics, it operates b/w -55°C to 85°C temperature range and has a compact size of 1.15mm x 0.35mm.
LGL29K-G2J1-24-0-2-R18-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LGL29K-G2J1-24-0-2-R18-Z is a 1.3mm SINGLE COLOR LED with peak wavelength of 572nm and viewing angle of 160°. Ideal for surface mount applications, it has a max forward current of 0.02A and nominal luminous intensity of 3.92mcd.
564-0200-222F
Dialight
Dialight's 564-0200-222F is a 3mm single color LED array with separate, 3-element configuration. It has a peak wavelength of 565nm and max forward current of 0.007A. Ideal for applications requiring green light emission, such as indicator lights in electronic devices.
XHP50B-00-0000-0D0UH20E3
LTL42NKFD
Visible LEDs;
SML-P24MUWT86R
ROHM
ROHM's SML-P24MUWT86R is a 1mm DUAL COLOR LED with MILKY WHITE lens. It has max forward current of 0.02A, operating temp range -40 to 85°C. Ideal for applications requiring compact surface mount LEDs with red/yellowish green colors and nominal luminous intensity of 52.0/21.0 mcd.
LTST-C191TBKT
LTST-C191TBKT by Lite-on Technology is a 1.1mm SINGLE COLOR LED with WATER CLEAR lens emitting ULTRA BRIGHT BLUE light at 468nm wavelength. It has a max forward current of 0.02A and viewing angle of 130°, making it ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
XHP35B-00-0000-0D0BD40E7
SMLP36RGB2W3R
ROHM's SMLP36RGB2W3R is a 1.5mm TRIPLE COLOR LED with SEPARATE, 3 ELEMENTS configuration. It has a max forward current of 0.01A and operates b/w -40 to 85°C. Ideal for surface mount applications requiring red, green, and blue light outputs in compact electronic devices.
CMD15-21UBC/TR8
Visual Communications Company
CMD15-21UBC/TR8 by Visual Communications Company is a 2mm BLUE LED with peak wavelength of 430nm. It has a clear lens, operates b/w -40°C to 85°C, and offers a luminous intensity of 45.0mcd. Ideal for surface mount applications in visible LED displays and indicators.
LTST-C191KSKT
LTST-C191KSKT by Lite-on Technology is a 1.1mm WATER CLEAR LED with peak wavelength of 588nm, emitting YELLOW light. With a max forward current of 0.03A and viewing angle of 130°, it's ideal for surface mount applications requiring high luminous intensity up to 104.0mcd.
HSMF-C162
Agilent Technologies
DUAL COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Nominal Luminous Intensity (mcd): 90.0; Lens Type: DIFFUSED; Terminal Finish: Tin/Lead (Sn/Pb);
551-0207F
Dialight's 551-0207F is a 3mm SINGLE COLOR LED with peak wavelength of 563nm, forward current of 0.06A, and forward voltage of 3V. Ideal for applications requiring GREEN light emission with TINTED DIFFUSED lens, such as indicator lights in electronics.
SML-D12M8WT86M
ROHM SML-D12M8WT86M is a 1.2mm SINGLE COLOR LED with milky white lens emitting YELLOWISH GREEN light at 25.0mcd intensity. It has a max forward current of 0.02A and operates b/w -40 to 85°C, suitable for surface mount applications in various electronic devices.
598-8710-307F
Dialight's 598-8710-307F is a COMMON ANODE, 3 ELEMENTS LED with size 1.6mm and max forward current of 0.02A. Ideal for applications requiring TRIPLE COLOR illumination with RED/GREEN/BLUE colors, it operates b/w -40 to 100 °C and has a viewing angle of 140°.
SML-210MTT86N
ROHM's SML-210MTT86N is a 1.4mm SINGLE COLOR LED with 0.025A max forward current, emitting YELLOWISH GREEN light at 20.5mcd intensity. Ideal for surface mount applications in electronics due to its compact size and low power consumption.
TLHB4400
Vishay Intertechnology
TLHB4400 by Vishay Intertechnology is a 2.9mm single color LED with peak wavelength of 428nm, forward current of 0.02A, and luminous intensity of 15.0mcd. Ideal for applications requiring blue light emission in a compact form factor with a viewing angle of 60° and radial mounting feature.
LTST-C171KGKT
LTST-C171KGKT by Lite-on Technology is a 1.4mm GREEN LED with a peak wavelength of 574nm and viewing angle of 130°. Ideal for surface mount applications, it has a max forward current of 0.03A and operates b/w -55°C to 85°C temperatures.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTW-C191TS5
LTW-C191TS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and nominal luminous intensity of 70.0 mcd. Ideal for surface mount applications, it operates b/w -20 to 80 °C, with a max forward current of 0.02 A.
LTW-C191TLA
LTW-C190DA5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: GREEN; Configuration: SINGLE;
LTW-C191DS5
LTW-C191DS5 by Lite-on Technology is a 1.1mm SINGLE COLOR LED with a viewing angle of 130° and luminous intensity of 125.5mcd. Ideal for applications requiring ultra bright white light, it operates b/w -30 to 85 °C with a forward current of 0.02A. This RECTANGULAR LED is designed for surface mount installation in various electronic devices.
LTW-C194TS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 78.5; Viewing Angle: 130 deg; Maximum Forward Current: .02 A;
LTW-C255DCKS-5A
DUAL COLOR LED;
LTW-C192TL2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 38.0; Viewing Angle: 130 deg; Size: 1.15 mm;
LTW-C230DS2
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 31.5; Lens Type: YELLOW; Shape: RECTANGULAR;
LTW-C193TS5
LTW-C193TS5 by Lite-on Technology is a single color LED with a size of 1.15mm and max forward current of 0.02A. With a viewing angle of 130°, it is ideal for applications requiring ultra bright white light in compact spaces. Its surface mount feature and low operating temperature range make it suitable for various electronic devices.
LTW-C190DS5-CS
Diodes Incorporated
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Minimum Luminous Intensity: .045 cd;
LTW-C281DS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Color: ULTRA BRIGHT WHITE;
LTW-C230DC
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 315.0; Lens Type: YELLOW; Packing Method: TR, 7 INCH;
LTW-C231DS
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 275.0; Lens Type: YELLOW; No. of Functions: 1;
LTW-C237DS
LTW-C193DS5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Terminal Finish: TIN;
LTW-C230UC5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 70.0; Lens Type: YELLOW; Minimum Luminous Intensity: .028 cd;
LTW-C193DM5
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 118.0; Lens Type: YELLOW; Maximum Forward Voltage: 3.1 V;
LTW-C191DS-HT
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 757.5; Lens Type: YELLOW; Height: .55 mm;
LTW-C150DC-QD
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 337.0; Lens Type: YELLOW; Additional Features: IC COMPATIBLE;
Lite-on Semiconductor
SINGLE COLOR LED; Mounting Feature: SURFACE MOUNT; No. of Terminals: 2; Nominal Luminous Intensity (mcd): 112.5; Lens Type: YELLOW; Height: .8 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved